Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 440C Skidder ***SOLD***

John Deere 440C Skidder ***SOLD***

John Deere 440C Skidder. This is a nice older skidder, dry and tight, 18.4 x 26 rubber in good condition, 1 set of chains, recently serviced. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

John Deere 440C Unknown
$26,000
John Deere 548GIII Grapple Skidder with Winch

John Deere 548GIII Grapple Skidder with Winch

2012 John Deere 548GIII Grapple Skidder with Winch. Hour meter reads 4,323 hours, runs and starts good, strong hydraulics and transmission, all cylinders are in good working order, tight pins and bushings all around, strong winch, greased daily. Heat, A/C, and lights. 28Lx26 tires @ 85% with Single Diamond and Double Diamond chains. Has been very well cared for. One owner/operator. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 548GIII 2012
$160,000
John Deere 648G Skidder

John Deere 648G Skidder

1998 John Deere 648G Dual Arch Grapple Skidder. Hour meter reads 18,094 hours, grapple resealed and new grapple brakes, has winch but no drive shaft, 14 bolt rims and 30.5 x 32 tires in good condition, 2 are new, & 2 are @ 60-70%, completely gone through last breakup, heat, lights, no AC. Plug in block heater. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 648G 1998
$33,000
John Deere 648H Skidder

John Deere 648H Skidder

2011 John Deere 648H Dual Arch Grapple Skidder. This machine runs and starts good, strong hydraulics and transmission, axles and cradles are in good order, 30.5 x 32 tires with tracks and chains, tight pins and bushings. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere - 2011
$Call for Price
John Deere 548GIII Skidder ***SOLD***

John Deere 548GIII Skidder ***SOLD***

2012 John Deere 548GIII Grapple Skidder with Winch. This skidder has a strong engine and transmission, runs and starts good, shifts like it should, 1 owner/operator, tight center section, pins and bushings are in good working order in the arch and grapple, strong winch, new control line on winch, 9/16 Super Swedge cable, 28L x 26 tires with 5/8 double diamond chains. Good spare tire and rim @ 70% included and 1 set of chains. Enclosed cab with heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

John Deere 548GIII 2012
$79,900
2006 John Deere 648GIII Skidder in Wyoming

2006 John Deere 648GIII Skidder in Wyoming

2006 JD 648GIII Single Arch Grapple Skidder. 6605 machine hours. Only 170 hours on the NEW ENGINE. It has new 24.5-32 Primex Log Stomper tires with only 200 hours of pulling post & pole trees in Pinedale Wyoming. Torque converter transmission. Comes with all 4 hardly used American Chains “Superstud” tire chains used only for some snow pushing in our post yard with the 14ft. Snow Pusher. Comes with a pin on Brush Rake. Has a new steering valve. Has a block heater on the engine. Rebuilt grapple cylinders and arch cylinders. Repair/Operation manuals and parts catalog included. The 4000 series winch is off the machine on a pallet. Used spare tire included. Both the AC and heat work. Has an AM/FM stereo. Some new filters and a bucket of Hy-Gard. This is a clean, dry, tight machine! All greased ready to go! I am all done logging…that is why it is for sale! Pickaroon Timber Products-Pinedale, WY 82941 Phone 307-367-6267 or Scott’s cell 307-360-6267

John Deere 648GIII 2006
$95,000

John Deere 648GIII Dual Arch Grapple Skidder

2003 John Deere 648GIII Dual Arch Grapple Skidder. This skidder runs and starts good, strong hydraulics and cylinders. Direct drive transmission in good working order, tight center section, decent pins and bushings on the arch, grapple pins have a little play. Axles and cradles are in good working order, tires are @ 75%, heat. A/C needs attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

John Deere 648GIII 2003
$49,500
John Deere 440C Skidder

John Deere 440C Skidder

1979 John Deere 440C Cable Skidder. This skidder has had a major rebuilt engine, new fuel system and turbo, new cradle pins and spider gear, tight center section. Strong hydraulics and cylinders, winch is in good working order, strong 3 speed syncro transmission in good working condition. Enclosed cab with heat, 18.4x26 tires, rear tires are @ 80% front tires are @ 30% with newer ice chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 440C 1979
$26,500
KMC 1600H Swing Grapple Track Skidder

KMC 1600H Swing Grapple Track Skidder

KMC 1600H Hydrostatic Swing Grapple Track Skidder. Owner said that this unit has a newly rebuilt Cummins Model 6BTA 174 HP Diesel Engine with 0 hours. All components minus the block were purchased new from Cummins - injectors, turbo, starter, etc. New batteries and battery cables. 2,800 frame hours showing on meter. Owner stated this unit was reconditioned by KMC around 200 hours ago, track system is in very good shape. Hydraulic pump for left side track was just rebuilt. Very nice machine, must see. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA.

KMC 1600H -
$235,000
Prentice 490 Skidder

Prentice 490 Skidder

2005 Prentice 490 D/A Grapple Skidder with Winch. This machine has a reman engine bought 2 years ago from Cummins, runs and starts good, tight pins and bushings, tight center, good cylinders, newer pump, 30.5x35 tires, winch is in good working condition, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 490 2005
$55,000
Tigercat 620C D/A Grapple Skidder

Tigercat 620C D/A Grapple Skidder

2009 Tigercat 620C D/A Grapple Skidder with Winch. Owner stated that this unit has 7,800 hours, Cummins engine, runs and starts good, tight pins and bushings, strong hydraulics. Owner said that this machine has good drive motor and pump, tires 30.5x32 2 @ 90%, 1 @ 70%, heat, A/C, differentials in good working order. Ready to work.. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Tigercat 620C D/A 2009
$132,000
Tigercat 630C Skidder

Tigercat 630C Skidder

2005 Tigercat 630C Dual Arch Grapple Skidder. This equipment has a newer crate Cummins engine with 4,000 hours, runs and starts good, strong hydraulics, new joystick and wiring, tight pins and bushings, strong transmission, cylinders are in good working condition, tires are 30.5x32 @ 50% with chains @ 40%, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Tigercat 630C 2005
$46,500