Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Peterson 4310B Track Chipper

Peterson 4310B Track Chipper

2013 Peterson 4310B Track Chipper. Hour meter reads ~5,400 hours. CAT C18 755hp engine starts and runs good. 36”x45” drum with 12 knives. Babbitt knives system. PT Tech HPTO 14 FX clutch that is new. Sprockets are also new. Includes a Peterson Adaptive Control System Radio Remote. 60 to 120 tons per hour (130,000 LBS. to 260,000 LBS,) depending on wood species, chip size, and moisture content. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Peterson Pacific 4310B 2013
$265,000
John Deere 748H Skidder

John Deere 748H Skidder

2013 John Deere 748H Dual Arch Log Skidder with Winch. 9,630 hours on machine. Direct Drive. Trail blade. SWEDA axles. 30.5x32 tires, 2 brand new tires and 2 tires at 90% with a newer set of double diamond studded ice chains. Machine also comes with a set of duals at 80-90%. Very straight and dry machine, new pins and bushings recently replaced where needed. 360 grapple. Winch is currently off machine but will go with. Owner operated machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748H 2013
$89,900
TimberPro TF830B Forwarder

TimberPro TF830B Forwarder

2013 TimberPro TF830B Forwarder. Hour meter reads 7,389 hours. Cummins QSC 8.3L tier 3 engine starts and runs good. 710/45R26.5 tires are estimated at 80%, there is some weather checking. New alternator, reman starter, A/C repaired, 6 reman injectors, fuel pump and injector lines all within the last 6 months. Espar preheater. SuperGrip bypass grapple. Cab has heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TF830B 2013
$215,000
Serco 300 Loader w/ Hanfab Slasher

Serco 300 Loader w/ Hanfab Slasher

2013 Serco 300 Loader w/ Hanfab Slasher. Hour meter reads 8,783 hours. John Deere 6068HF engine starts and runs good. This loader is on a self-propelled Grayco carrier with an automatic greaser. 32' knuckle boom with a dead heel & Rotobec 7606 360° grapple. Hanfab 72" slasher works as it should, strong hydraulics. Enclosed cab has heat, A/C, and joystick controls. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 300 2013
$152,500
Komatsu XT430-2 Feller Buncher ***SOLD***

Komatsu XT430-2 Feller Buncher ***SOLD***

2011 Komatsu XT430-2 Feller Buncher with Quadco 22B 360° Head. Hour meter reads 10,150 hours. Cummins QSC 8.3 engine starts and runs good. 24" triple grouser pads, undercarriage is estimated at 80%. IQAN digital control system. Espar preheater. 2000 hours on new Komatsu rails and injection pump. Rotary manifold and main hydraulic pump were replaced 1,000 hours ago. Cab has heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Komatsu XT430-2 2013
$145,000
Komatsu 840.4 Double Bunk 6 Wheel Forwarder

Komatsu 840.4 Double Bunk 6 Wheel Forwarder

2013 Komatsu 840.4 Double Bunk 6 Wheel Forwarder with blade. Hour meter reads ~7,100 hours. Machine has strong hydraulics and cylinders, transmission solid. New computer, new accumulator, new oil bypass valve, has blade. Also has tracks and chains available for additional cost. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA

Komatsu 840.4 2013
$139,000
John Deere 748H Skidder ***SOLD***

John Deere 748H Skidder ***SOLD***

2013 John Deere 748H Grapple Skidder with Winch. Hour meter reads 12,188 hours. John Deere 6068H engine starts and runs good. PowerShift transmission shifts well. 30.5x32 tires estimated at 90% on the rear, and 75% on the front. SWEDA axles with dual rims all around. Strong hydraulics and tight center. Blade works as it should and has a strong winch. Cab has heat, a/c, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. ***SOLD***

John Deere 748H 2013
$88,500
John Deere 648H Skidder

John Deere 648H Skidder

2013 John Deere 648H Dual Arch Grapple Skidder. Hour meter reads 11,200 hours. John Deere 6068H engine starts and runs good. Torque converter transmission shifts well. 30.5x32 tires are estimated at 30%. Tight pins and bushings. Center pins are tight. Strong hydraulics, grapple and blade work as they should. Enclosed cab has heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 648H 2013
$64,500
John Deere 540GIII Cable Skidder **SOLD**

John Deere 540GIII Cable Skidder **SOLD**

2013 John Deere 540GIII Cable Skidder. Hour meter reads 3,017 hours. John Deere 6068T engine starts and runs good. PowerShift transmission shifts well. Tires are estimated at 85%. Tight center section, winch and blade work as they should. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.**SOLD**

John Deere 540GIII 2013
$127,500
Rottne H-14B Harvester with a SP561 LF Head

Rottne H-14B Harvester with a SP561 LF Head

2013 Rottne H-14B Harvester with a SP561 LF Head. Only 7,300 hours on this machine. John Deere 6068 engine, runs and starts good, pre-heat system, strong hydraulics and drive system. RK-140 crane, SP-561 LF head is in good working order, Dasa 5 computer, tight boom, 710 tires with track and chains, Heat, A/C, LED lights, and radio. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. More photos available upon request Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. More photos available upon request. REDUCED price from $199,000.00

Rottne H14B 2013
$185,000
Tigercat X822C Feller Buncher  ***SOLD***

Tigercat X822C Feller Buncher ***SOLD***

2013 Tigercat X822C with Tigercat 5400 Felling Head. Hour meter reads 13,958 hours. Cummins QSL 9L Engine replaced 5,500 hours ago (has paperwork), runs and starts good, new turbo has a working Webasto pre heater. Tight pins and bushings in boom and head. All boom cylinders were resealed. New skylight. New pins and bushings in boom. Strong hydraulics and cylinders. 28" single grouser pads and rails replaced approximately 1,500 hours ago. Tigercat 5400 continuous rotation head. Clean cab with fire suppression, heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Tigercat X822C 2013
$152,500
Komatsu 911.5 Harvester with Valmet 370.2 Head

Komatsu 911.5 Harvester with Valmet 370.2 Head

2013 Komatsu 911.5 Harvester with a Valmet 370.2 Processing Head. Hour meter reads 8,400 hours. Sisu 6cyl engine, rotate and leveling cab in good working order. Machine is in excellent condition for age. Head is in very good condition. 710 bogey tires @ 75%. One set of tracks @ 50%. No leaks, very tight, very nice machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu 911.5 2013
$219,000