Featured in Logging Equipment
| Photo |
Title
|
Make | Model | Year | Price |
|
Prentice 2210 Log Loader2010 Prentice 2210 Log Loader. Hour meter reads 8,522 hours, runs and starts good, 27' boom reach. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Prentice | 2210 | 2010 |
$36,500
|
|
Barko 295ML Loader Slasher2010 Barko 295ML Loader Slasher Mounted on a 1988 Ford LTL 9000 with a 2000 Hanfab 60" Slasher. 10,000 hours on loader with Cummins engine. 664,000 miles on truck. Loader is in very good shape overall, well maintained by owner operator. Ford is double framed with a 3406B 425 HP CAT engine and power divider. New swing gear box on loader with 0 hours. New tires on Hanfab slasher with heavy duty rims. Dry machine. Pro-Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 295ML | 2010 |
$75,000
|
|
CAT 545C Skidder2010 CAT 545C Dual Arch Grapple Skidder. Hour meter reads 10,270 hours, runs and starts good, strong transmission, strong hydraulics and cylinders, tight center section, grapple and arch are in good working order, new oscillation bearing. 35.5 32 rubber with chains all around. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
CAT | 545C | 2010 |
$69,500
|
|
John Deere 848H Skidder2010 John Deere 848H Dual Arch Grapple Skidder. This skidder has less than 1 hour on a new engine, 9,880 hours frame hours, runs and starts good. Torque transmission, strong hydraulics and cylinders, tight center section, arch and grapple pins are tight. Heat, A/C, and lights. Tires are @ 75% with a set of 5/8 chains. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 848H | 2010 |
$129,000
|
|
Bandit 3590XL Whole Tree Chipper2010 Bandit 3590XL Whole Tree Chipper. Hour meter shows ~6500 hours. CAT C27 1050 HP w/ optional engine chip to 1370 HP. Engine runs and starts good. Hydronic engine preheated. PT tech clutch. Extended frame, to offset radiator from the engine. Hydraulic reversing fan which increases HP to the chip drum. Upgraded feedbox wall plates to 2" AR 450. Chip pocket upgrades, overs breakers. Overs breaker grates upgrade that bolt in at drum chute. The following upgrades were made at 6,467 hours. New brakes and bearings, new top side of chute, new drum belly wear plate, new infeed chain sprockets, new manifolds and studs 6,467 hours. 36+ inch chipping capacity. Set up for .75" chip size, 2.75+ tons per minute capacity. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA |
Bandit | 3590XL | 2010 |
$Call for Price
|
|
Ponsse Ergo 6WD Harvester with a Ponsse H7 Head2010 Ponsse Ergo 6WD Harvester with a Ponsse H7 Head. Machine has only 10,400 hours. 6cyl Mercedes Benz engine, runs and starts good, preheat system, strong hydraulics and cylinders. Drive system in good working order. Tight center section, tight boom and boom base, squirt works as it should. Bogies and axles are in good condition. H7 head has good rollers and grab arms. Measuring system works as it should. Comfort grips. Heat, A/C, and lights. Tires are @ 50%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 2010 |
$172,500
|
|
EcoLog 590D Harvester with a Logmax 7000 Head2010 EcoLog 590D Harvester with a Logmax 7000 Head. This harvester has a Mercedes Benz engine, runs and starts good, Wabasto pre heater, strong hydraulics and pumps, pumps have been rebuilt, cylinders and valve bank are in good working order, auxiliary hydraulic cooler. Tight center section, bogies and axles are in good condition, tight boom and squirt boom. 300 crane. Logmax 7000 head in good working order, solid grab arms, bar saw and measuring wheel are in good working condition, Dasa 4 computer system. Good windows, Heat, A/C, and lights. Tires are @ 50% and better, 700 x 30.5 front and 700 x 34 rears. Tracks and chains are @ 50%. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ecolog | 590D | 2010 |
$109,500
|
|
Morbark 40/36 Whole Tree Chipper2010 Morbark 40/36 Whole Tree Chipper. This chipper has a 600 HP John Deere Engine, runs and operates good, 1,900 hours on the engine, 6,100 total hours. Feed wheel and drive gearbox are in good working order, new feed bed. Strong hydraulics and cylinders. Drum knife and holders are in good condition. Fully functional remote. Good tires and brakes, wiring is all in good shape. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Morbark | 40/36 | 2010 |
$135,000
|
|
CAT 501HD Harvester with a Fabtek 4 Roller Head2010 CAT 501HD Harvester with a Fabtek 4 Roller Head. This equipment runs and starts good, Proheat, hour meter reads 15,900 hours, many updates, newer injection pump and injectors, newer oil cooler. Strong hydraulics and cylinders. Undercarriage is @ 65%. Head is in working condition, rollers and grab arms are in good working order, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
CAT | 501HD | 2010 |
$104,500
|
|
Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head2010 Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head. This equipment has a 4 cyl. Mercedes Benz engine, runs and starts good, Webasto pre heater, fire suppression system, computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. 2015 H6 head is in good working order. 700 Tires with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Fox | 2010 |
$245,500
|
|
John Deere 648H Skidder2010 John Deere 648H Dual Arch Grapple Skidder with Winch. Hour meter reads 8,358 hours, John Deere engine, runs and starts good, strong hydraulics and cylinder, strong winch, 3/4" mainline. Tight center section and arch pins. Dual rings, good 30.5 x 32 rubber with one set of chains. Tight and dry skidder in excellent condition for age/hours. Block heater, A/C, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 648H | 2010 |
$84,900
|
|
2010 Doosan DX180LC2010 Doosan DX180LC 2751.8 hrs $125K |
- | - | 2010 |
$125,000
|