Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
 Morbark 40/36 Whole Tree Chipper

Morbark 40/36 Whole Tree Chipper

2009 Morbark 40/36 Whole Tree Chipper. This equipment has a John Deere 600 HP engine, 4,684 hours on machine, runs and starts good, strong hydraulics and pumps. Updated advantage 3 drum, rebuilt clutch, updated feed chain and drive sprocket, one size bigger. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark 40/36 2009
$133,500
2009 Valmet 415FX

2009 Valmet 415FX

Came off the job working daily. Strong running Cummins 6.7 6 cylinder engine. 20 inch Quadco Head with a brand new saw disc just installed. Quadco head is fixed. Heat and A/C. Excellent undercarriage, new upper rollers being installed as we speak. 2 speed transmission works as it should. Preheater. New paint and decals. No welding on boom and it's very tight. These are very rare and hard to find. We can assist with trucking if needed. Feel free to call us with any questions that you may have.

Fabtek 415 FX 2009
$109,500
John Deere 540GIII Skidder

John Deere 540GIII Skidder

2009 John Deere 540GIII Cable Skidder with Winch. This machine has a John Deere 6 cyl. engine, runs and starts good, strong hydraulics and cylinders. Powershift 8 speed transmission. Tight center section, winch is in good working order, 3/4" super swedge mainline. Heat, no A/C. 23.1 x 26 tires with Ice chains. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 540GIII 2009
$93,500
Timberking TK520 Log Loader

Timberking TK520 Log Loader

2009 Timberking TK520 Log Loader. This equipment has 7,100 hours, CAT engine, runs and starts good, strong hydraulics and cylinders, tight boom, 360 grapple, swing gear is in good working order, outriggers in good condition, live heal. Pitts carrier good brakes and tires. Heat, A/C, and lights. Is not plumbed for saw. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberking TK520 2009
$23,900
John Deere 1110D Forwarder

John Deere 1110D Forwarder

2009 John Deere 1110D 8 Wheel Double Bunk Forwarder. Hour meter reads 10,600 hours, John Deere 6 cylinder engine, newer EGR cooler, Espar preheat system, center section was just tightened this summer, strong hydraulics and pumps, all cylinders in good working order. CF500 crane, tight pins and bushings, double extension on boom working as it should, super dry machine, well maintained. 710/45-26.5 tires, track on the rear. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1110D 2009
$150,000
Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher

Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher

2009 Hood S-182 Self Propelled 6x6 Loader with 60" Hood Slasher. This loader has around 7,000 hours, runs and starts good, Pro heat, John Deere engine runs and starts good. Strong hydraulics and cylinders, main boom cylinder has been repacked, drive system is in good working order, pilot controls, 360 bypass grapple. 2005 Hood 60" Slasher with low hours around 200, new blade, solid frame no cracks or welds. Heavy duty tires, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hood S-182 2009
$80,000
Ponsse Ergo 6WD Harvester

Ponsse Ergo 6WD Harvester

2009 Ponsse Ergo 6WD Harvester with a H7 Head. This equipment has 2,500 hours since a Ponsse reman was done, Mercedes Benz 6 cyl. engine, runs and starts good, pre-heat system, strong hydraulics and cylinders, bogies are in good working order, tight boom, squirt boom works as it should, solid boom base. Pumps are all in good working order, tight center section. Head and measuring system are in good working order, 710 tires with tracks, good glass. Heat, A/c, and LED lights. Contact Aaron @ Red Pine Equipment 218 -720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2009
$169,000
Valmet 430FXL Feller Buncher

Valmet 430FXL Feller Buncher

2009 Valmet 430FXL Feller Buncher. This equipment has a Cummins 8.3 engine, starts & runs good, has engine plug in, 11,500 hours, strong hydraulics and cylinders. Updated undercarriage, new rails, sprockets, and idlers 1500 hours ago. 24" pads. 22" 360 degree head in good condition, straight disc, leveling system is in good working order, heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 430 FXL 2009
$109,900
Valmet 430FXL Processor with a Rolly II Intermittent Head

Valmet 430FXL Processor with a Rolly II Intermittent Head

2009 Valmet 430FXL Processor with a Rolly II Intermittent Head. This machine runs and starts good, strong hydraulics and pumps, tight pins and bushings in the boom and head. Undercarriage is in good working order, single grouser pads. Rolly II head works good. Good glass. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 430FXL 2009
$Call for Price
Ponsse Elk 6 Wheel Forwarder

Ponsse Elk 6 Wheel Forwarder

2009 Ponsse Elk 6 Wheel Double Bunk Forwarder. This machine has around 12,000 hours, Mercedes Benz engine, runs and starts good, turbo has been replaced, strong hydraulics and cylinders, transmission is in good working order, T90 crane, tight center section, 600 tires, bogies are in good working condition, pre heater. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Elk 2009
$154,500
Tigercat 822C Feller Buncher

Tigercat 822C Feller Buncher

2009 Tigercat 822C Feller Buncher. This machine has 9,500 hours, 3,096 hours on the engine, runs and starts good, strong hydraulics and cylinders, tight boom and head. 5000 model head 24" 180 degree straight disc and decent teeth. Undercarriage is in good working order, new main boom cylinder, tight controls, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA.

Tigercat 822C 2009
$133,500
Komatsu 840.4 Forwarder

Komatsu 840.4 Forwarder

2009 Komatsu 840.4 Double Bunk Forwarder. This machine runs and starts good, new fuel pump strong hydraulics and cylinders, includes new drive motor and pump, tight boom and grapple, loader controls have been rewired, tight center section, bogies are in good order. Wabasto pre-heater, 700 rear tires, 28L front tires with tracks, tires are @ 80%. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu 840.4 2009
$Call for Price