Sort By:   GridGallery
Photo Title
Make Model Year Price
Dynamic Model 585 23" Chipper

Dynamic Model 585 23" Chipper

2008 Dynamic Model 585 23" Chipper. John Deere 500hp Fuel consumption ~8 gallons/hour 30 ton chipping in 30-45 minutes depending on material Chips tops very well with side feed rollers 23" max capacity 3 feed chains on feed bed Comes with remote control Chute is non-variable, always pointing 180 degrees from feed table Grapple hook for moving with skidder Pintle hitch Contact Aaron @ Red Pine Equipment 218-720-0933.

Dynamic 585 2008
$59,900
2008 Ponsse Wisent Forwarder

2008 Ponsse Wisent Forwarder

Hours are 16,666. Recent work done and we have the receipts which come up to just under $11,000 dollars. Heat & A/C. Benz engine runs like a top. Hydrostatic tranny works excellent. Fire suppression. Pre Heater. Grill guard and frame lock. CD Player. Front tires are 600/65-34 in 50% or better condition. Rear tires are 600/55-26.5 in similar condition to the front. Seat is like new yet. Nothing to be afraid of here. New paint and decals.

Ponsse Wisent 2008
$129,000
2008 Prentice 2190 Harvester

2008 Prentice 2190 Harvester

2008 PRENTICE 2190 TRACKED HARVESTER 6 CYL CAT FOUR ROLLER HEAD

Prentice 2190 2008
$139,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$180,000
John Deere 1470D Processor with Waratah H290 Head

John Deere 1470D Processor with Waratah H290 Head

2008 John Deere 1470D Processor with Waratah H290 Head. Hour meter reads 10,151 hours, John Deere 6 cyl. engine, runs and starts good, pre-heat system, strong hydraulics and cylinders, drive system is in good working order, tight CH885 squirt boom, head has good feed rollers and grab arms, computer and measuring system are in good working condition, bogies and axles up to par, tight center section, 700 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 1470D 2008
$Call for Price
Mobark 2355 Flail Total Chip Harvester

Mobark 2355 Flail Total Chip Harvester

2008 Mobark 2355 Flail Total Chip Harvester. This machine has 10,000 hours, 3412E CAT engine, runs and starts good, strong hydraulics, Morlift 500 loader, debarker is in good working order, discharge conveyor, tilt cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Morbark 2355 2008
$250,000
2008 CAT 501 Processor

2008 CAT 501 Processor

CAT 501, PRENTICE DANGLE HEAD, 6 CYL CAT

CAT 501 2008
$169,000
2008 Morbark 40/36 Chipper

2008 Morbark 40/36 Chipper

MORBARK 40/36 DRUM CHIPPER 6 CYL DEERE

Morbark 40/36 2008
$189,000
2008 John Deere 843J Sawhead

2008 John Deere 843J Sawhead

843J SAWHEAD FD22B HOTSAW 22" 6 CYL JOHN DEERE JOYSTICK STEER 28L-26 RUBBER

John Deere 843J 2008
$99,000
Valmet Komatsu 430 FXL Feller Buncher ***SOLD***

Valmet Komatsu 430 FXL Feller Buncher ***SOLD***

2008 Valmet Komatsu 430 FXL Feller Buncher. This machine has a Cummins engine, hour meter reads 8,650 hours, runs and starts good, pre-heater, strong hydraulics and cylinders, new pumps, undercarriage is @ 75%, 22" Quadco hot saw in good working order, straight blade, tight boom, grab arms and rotator are in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Valmet Komatsu 430 FXL 2008
$184,900
CAT 501HD Processor ***SOLD***

CAT 501HD Processor ***SOLD***

2008 CAT 501HD Processor with a Dangle Processor Head. This machine has 9,800 hours, runs and starts good, strong hydraulics, undercarriage is in good working order - 65-75%, tight boom, has been re-enforced, computer in good working condition, PH head in good working condition was completely rebuilt 8 months ago, new grab arms, feed rollers, new saw motor, heat, A/C, and radio. Machine has been well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

CAT 501HD 2008
$114,900
Morbark 30/36 Drum Chipper

Morbark 30/36 Drum Chipper

2008 Morbark 30/36 Drum Chipper. This equipment currently has 4,120 hours, runs and starts good, strong hydraulics, drum and in-feed all are in good working order, maintained and run daily, complete maintenance and repair records available. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark 30/36 2008
$152,900