Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 460DSkidder

Timberjack 460DSkidder

2002 Timberjack 460D Single Arch Grapple Skidder with Winch. Hour meter reads 15,068 hours. John Deere 6068T Engine starts and runs good. 35.5x32 tires, 2 at 60% and 2 at 80%. Tight center section, strong hydraulics and cylinders. Winch is in good working order. 2 sets of chains included. Enclosed cab has heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 460D 2002
$39,500
John Deere 200C LC with 1994 Denis D3000 Delimber

John Deere 200C LC with 1994 Denis D3000 Delimber

2002 John Deere 200C LC with 1994 Denis D3000 Delimber. Hour meter reads 10,000 hours. John Deere 6068 Engine was rebuilt 1,000 hours ago. Has forestry package. Undercarriage is at 90%. Triple grouser pads. Enclosed cab has heat, A/C, lights & radio. Strong hydraulics. 1994 Denis D3000 Delimber has a new chain. Straight boom. Top saw is in good shape. Well maintained and ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 200C LC 2002
$48,900
CAT 525B Skidder

CAT 525B Skidder

2002 CAT 525B Dual Arch Grapple Skidder. Machine has just over 14,000 hours. 35.5 tires, 2 new, the other 2 average 40%. Injectors have been done on engine. Stacking blade. Machine is dry and has been maintained well. All functions operate as they should. Seat and controls in good shape. Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

CAT 525B 2002
$32,500
Timbco T415-D Harvester with a 2007 Rolly II Head

Timbco T415-D Harvester with a 2007 Rolly II Head

2002 Timbco T415-D Harvester with a 2007 Rolly II Head. This equipment has a Cummins 8.3 engine, runs and starts good, strong hydraulics, newer Kawasaki pump, Pre heat system, newer tilt motor on the head, reversing fan. Tight boom and swing gear, repinned and bushed. Double grouser tracks @ 30%. Head has new teeth, tight grab arms, rollers are in good working order. Heat , A/C, new pump and fan, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco T415-D 2002
$55,000
Ponsse Ergo Harvester with H7E Processing Head

Ponsse Ergo Harvester with H7E Processing Head

2002 Ponsse Ergo Harvester with H7E Processing Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and cylinders, HN 125 Crane. Fire suppression. Webasto pre-heater. 700/50-26.5 tires, strong boom, head is in good working order. Heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2002
$85,000
Komatsu PC 200 LC-7 w/ Limmit 2000B Delimber

Komatsu PC 200 LC-7 w/ Limmit 2000B Delimber

2002 Komatsu PC 200 LC-7 with a Limmit 2000B Delimber. This machine has 14,440 total hours. runs and starts good, 1,650 hours on new hydraulic pump, all hydraulic cylinders resealed, welded line bored with new pins bushings throughout, heat & A/C. Tight, dry machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC 200 LC-7 2002
$35,000
Tigercat 718 Feller Buncher

Tigercat 718 Feller Buncher

2002 Tigercat 718 Feller Buncher. This equipment has a new engine less then a 100 hours, runs and starts good, strong hydraulics and hydrostats, all clinders are in good condition, tight pins and bushing, straight disc good teeth, 28L x 26 tires @ 75%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Tigercat 718 2002
$37,500
Timberjack C45 Tree Trimmer

Timberjack C45 Tree Trimmer

2002 Timberjack C45 Tree Trimmer. This machine has a Cummins 5.9 6BT engine, runs and starts good, 4 speed auto transmission, 100" Esco grapple, 30 ton winch, tight center section, strong hydraulics and cylinders, heat works. Contact Erik @ Red Pine Equipment 218-720-0933. Saw is located in Northcentral USA

Timberjack C45 2002
$38,500
John Deere 200LC Processor with a 620 Waratah Head

John Deere 200LC Processor with a 620 Waratah Head

2002 John Deere 200LC Processor with a 620 Waratah Head. This machine has a complete dealer engine approx. 4,000 hours ago, runs and starts good, new electronic module in head. Pallet of Waratah parts: feed wheels, cylinders, valves, etc. Decent undercarriage. Boom is in good working order, heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 200LC 2002
$38,000
Hood 24000 Self Propelled Log Loader

Hood 24000 Self Propelled Log Loader

2002 Hood 24000 Self Propelled Log Loader. This loader has a John Deere 6 cylinder engine, runs and starts good. Pro Heat system, new fuel pump, strong hydraulics and cylinders, joystick controls. Tight boom and grapple, pins and bushing in the boom are in order, drive system is in good working condition, plumbed for slasher, pintle hitch, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hood 24000 2002
$59,500
Fabtek 546C Forwarder  ***SOLD***

Fabtek 546C Forwarder ***SOLD***

2002 Fabtek 546C 6 Wheeled Double Bunk Forwarder. This forwarder has 15,000 hours, runs and operates good, strong hydraulics and cylinders, center pins and boom pins are nice and snug along with the bucket. Log bunks are in great shape not all welded. Joystick controls are on point, great response not jumpy, very fast and accurate. Tires are fair, also has a set of tire chains for the front. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Fabtek 546C 2002
$56,900
Ponsse Ergo with Ponsse H73 Processing Head

Ponsse Ergo with Ponsse H73 Processing Head

2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2002
$49,000