Sort By:   GridGallery
Photo Title
Make Model Year Price
CAT 525 Grapple Skidder with Winch

CAT 525 Grapple Skidder with Winch

1996 CAT 525 Grapple Skidder with Winch. This skidder runs and starts good, strong hydraulics and transmission, steer blade and steer cylinders are in good order, has a few seeps, winch and grapple are in good condition, 30.5x32 tires @ 70% with a set of new chains, 3/4" swedge cable 3 chokers, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 525 1996
$28,500
Hydro-ax 411E Feller Bunchers

Hydro-ax 411E Feller Bunchers

1996 Hydro-ax 411E, Timbco bar-saw head, 6BT Cummins engine, 23.1x26 rubber, 9749 hours

Hydro-Ax 411E 1996
$34,999
Timbco T415 Processor with a 2003 Logmax 7000 Head **SOLD**

Timbco T415 Processor with a 2003 Logmax 7000 Head **SOLD**

1996 Timbco T415 Processor with a 2003 Logmax 7000 Head. This machine has a Cummins engine, runs and starts good, strong hydraulics, and cylinders, tight squirt boom, 32" pads triple grouser, good hoses, feed rollers and grab arms are in good working order, heat, A/C, and Lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timbco T415 1996
$57,500
John Deere 690 ELC with Propac 513 Delimber

John Deere 690 ELC with Propac 513 Delimber

1996 John Deere 690 ELC with Propac 513 Delimber. This delimber runs & starts good, strong hydraulics and cylinders, few minor leaks, straight boom, all chains and cables are in order, knives and topping saw are in working order, triple grouser pads. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 690 ELC 1996
$Call for Price
John Deere 490E Processor with Fabtek 4 Roller Head

John Deere 490E Processor with Fabtek 4 Roller Head

1996 John Deere 490E with Fabtek 4 Roller Head. This machine has a new 4 cylinder John Deere engine 2,000 hours ago. Cab has heat, A/C & Pro-Heater, many spare parts to go with, spare saw motor, new roller bearings, new chain, spare brain box. Well maintained machine, oil has been changed every 200 hours, tight controls, and always greased. Estimated 12,500 frame hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 490E 1996
$45,900
John Deere 648G Skidder ***SOLD***

John Deere 648G Skidder ***SOLD***

1996 John Deere 648G Dual Arch Grapple Skidder with Winch. This skidder runs and starts good, strong hydraulics and transmission, center has a little play not bad, cylinders are all in working order, has a few seeps, strong brakes, winch is in good working condition, 5/8 mainline, heat, and lights. A/C is non working. 30.5x32 tires @ 25%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 648G 1996
$23,500
John Deere 540E Cable Skidder

John Deere 540E Cable Skidder

1996 John Deere 540E Cable Skidder. This equipment has a 6059T engine, Powershift transmission, 13,700 frame hours, 28L x 26 tires at approx 30%, some play in the center pin, new carrier bearing, new seat, good brakes, good clutch, new exhaust, new master switch. Recently fixed drive shaft, new 3/4" mainline, rebuilt arch, open air cab, quick couplers for cold starts. New chains all around. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 540E 1996
$38,000
John Deere 648GII Skidder

John Deere 648GII Skidder

1996 John Deere 648GII Grapple Skidder with Winch. This machine was completely rebuilt 2 years ago, 1,150 hours on a new engine, all new pins and bushing done at the same time, strong hydraulics and cylinders, transmission is in good working order, 30.5x32 tires @ 75% with dual rims. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648GII 1996
$42,500
John Deere 548E Skidder

John Deere 548E Skidder

1996 John Deere 548E Grapple Skidder. New engine, machine was just repinned and re-bushed from front to back by John Deere, includes center, cradle, and blade. New hydraulic pump and accumulator. Has heat, no A/C. Strong transmission, new thru shaft. Contact Erik @ Red Pine Equipment 218-720-0933. Skidder is located in Northcentral USA.

John Deere 548E 1996
$45,900
John Deere 648E Skidder

John Deere 648E Skidder

1996 John Deere 648E Dual Arch Grapple Skidder. This engine was just gone through by John Deere, top end 300 hours ago, tight pins and bushings on the arch and grapple, tight center section, cylinders are all in good order, new oil and fuel filters, transmission is in good working order, oil and filter just changed, new Lexon glass, 30.5 tires @ 40%, new ice chains on the rear, bear claw chains on the front @ 40%. 2 extra tires and rims, heat, A/C is not working. Machine has a grapple on front blade for moving logs. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 648E 1996
$42,000
Pettibone Super 10 Lift Log Loader

Pettibone Super 10 Lift Log Loader

1996 Pettibone Super 10 Lift Log Loader. This machine has a John Deere engine, runs and starts good, strong hydraulics and 3 speed transmission, rear steer, cylinders are in good working order, around 6,000 hours, good tires and brakes, grapple is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Pettibone Super 10 1996
$28,500
1996 Timberjack 240 Cable Skidder

1996 Timberjack 240 Cable Skidder

TIMBERJACK 240 CABLE SKIDDER 4 CYL CUMMINS STANDARD SHIFT NEW TRANSMISSION EATON WINCH 18.4-26 NEW FIRESTONES

Timberjack 240 1996
$48,000