Sort By:   GridGallery
Photo Title
Make Model Year Price
Barko 775B Feller Buncher with a 22" Hot Saw

Barko 775B Feller Buncher with a 22" Hot Saw

Description: 1995 Barko 775B Feller Buncher with a 22" Hot Saw. Unit has a 8.3L Cummins with 3000 hours on complete overhaul with strong hydraulics. Hot saw has new bearings, spidle, blade and drive motor has been overhauled. Drive motors on machine has also been redone with a new pump drive gear box. Tires 40 to 50%. Set of double diamond ice chains. Ready To Work.

Barko 775B 1995
$17,900
Great Lake 42' Tri Rail Trailer with a Serco 7000 Loader

Great Lake 42' Tri Rail Trailer with a Serco 7000 Loader

1995 Great Lake 42' Tri Rail Trailer with a Serco 7000 Loader. 22.5s on the trailer @ 50%. Tight boom, new jib cylinder less than a year ago, rear lift axle, good brakes. DOT'd in Dec. Contact Erik @ Red Pine Equipment 218-720-0933. Trailer is located in Northcentral USA.

Great Lakes 42' 1995
$17,900
Timberjack 450 Skidder

Timberjack 450 Skidder

1995 Timberjack 450 Dual Arch Grapple Skidder with Winch. This skidder has a 5.9 Cummins engine, runs and starts good, strong Power Shift transmission, arch and grapple are in good working order, strong hydraulics and cylinders. 30.5x32 tires @60% with like new 5/8" Single Diamond chains. Blade extensions, heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 450 1995
$25,500
John Deere 548G Cable Skidder

John Deere 548G Cable Skidder

1995 John Deere 548G Cable Skidder. This machine has been converted to a cable skidder, strong hydraulics and winch, tight center section, good steer and blade cylinders, newer hydraulic pump, new cable, 23.1x26 tires in good condition, bear claw chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 548G 1995
$44,500
Serco 270 Self Propelled Loader

Serco 270 Self Propelled Loader

1995 Serco 270 Self Propelled Loader with Slasher Hook Ups. This equipment has a new John Deere 6068T engine with around 1,500 hours, new swing bearing and swing boxes, strong hydraulics and cylinders, boom and 360 1/2 cord grapple are in good working order, new boom knuckle 1,000 hours ago. Slasher package, Shopbuilt self propelled carrier with bunks and dead heal all in good condition, decent tires, and good brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 270 1995
$49,500
Prentice 180D Loader with 60" CTR Slasher Saw

Prentice 180D Loader with 60" CTR Slasher Saw

1995 Prentice 180D Loader with 60" CTR Slasher Saw. This loader has a 6068 John Deere engine, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, joystick controls, new paint, will be mounted on a pintle hitch trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 180D 1995
$26,500
John Deere 643D Feller Buncher ***SOLD***

John Deere 643D Feller Buncher ***SOLD***

1995-96 John Deere 643D Feller Buncher. This buncher has a John Deere 6068 engine, runs and starts good, strong hydraulics and transmission, all cylinders are in good working order, tight center section, solid axles and cradles. 22" head, straight disc, new teeth, grab arms are tight. 28Lx26 tires, 3 are @ 75%, 1 is @ 15%, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 643D 1995
$29,500
Hood S182 Self Propelled Loader

Hood S182 Self Propelled Loader

1995-96 Hood S182 Self Propelled Loader. This equipment has a John Deere 6068T engine, runs and starts good, 7,094 hours, strong hydraulics and cylinders, drive system is in good working order, air brakes, tight boom and grapple, Hood 360 continuous grapple, lever controls, solid carrier, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hood S182 1995
$33,500
Morbark 2455 Total Flail Chiparvestor Combo Machine

Morbark 2455 Total Flail Chiparvestor Combo Machine

1995 Morbark 2455 Total Flail Chiparvestor Combo Machine. This machine has a 3412 CAT 800 HP engine and a 3306 325 HP CAT engine, they both run and start good. Both have been updated. 27" capacity, updated key knife system, updated to an auger and bark pusher. Strong hydraulics and pumps, well maintained, Debarker is in good working order - just replaced flail, strong hydraulics and cylinders, Morlift 500 loader with cab, heat, A/C, and lights. Tri axle carrier has good brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Morbark 2455 1995
$125,000
John Deere 548G Forwarder

John Deere 548G Forwarder

1995 John Deere 548G Skidder factory converted to a Double Bunk forwarder by Serco. This machine has ~9,125 hours. Bunks are straight, no leaks evident on the machine. No welding on the machine, boom or bucket. 28L26 Firestone tires @ 60% average with dualing rings on rims. Set of 23.1-26 tires on dualing rims @ 50% average available also at additional cost. This machine is in excellent condition for it's age. Cab was extended by Serco. Controls were added for travel mode with seat in forward or reverse position. Serco 4000 loader with squirt boom. Pins and bushings are tight on machine, boom and bypass bucket. Machine holds 4 cords fully loaded. Located in NorthCentral USA. Contact Aaron for more information at 218-720-0933.

John Deere 548G 1995
$56,500
Timbco 420B Processor

Timbco 420B Processor

1994-95 Timbco 420B Processor with a Fabtek 4 Roller Head. This equipment has a Cummins engine, runs and starts good, strong hydraulics, few minor leaks, tight boom, front idler was replaced, decent roller and sprockets, 22" single grouser pads. Head has good feed rollers, grab arms, and knives, updated computer. Heat, A/C, and lights. Includes head, updated computer, manual, extra bars, and chains. Fabtek head can be purchased separately. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Timbco 420B 1995
$29,900
Hydro Ax 221 Feller Buncher ***SOLD***

Hydro Ax 221 Feller Buncher ***SOLD***

1995 Hydro Ax 221 Feller Buncher with 16" Shear Head. This equipment has a John Deere 4 cyl. engine, runs and starts good, strong hydraulics and cylinders, new hoses, drive system is in good working order, new cutting blade, tight pins and bushing on the head. Quick couplers. 28Lx26 tires @ 75%, heat, & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 221 1995
$11,500