Sort By:   GridGallery
Photo Title
Make Model Year Price
Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 210D -
$17,500
Hood S-182 Self Propelled Loader with Hood 60" Slasher

Hood S-182 Self Propelled Loader with Hood 60" Slasher

2000 Hood S-182 Self Propelled Loader with Hood 60" Adjustable Slasher. Hour meter reads 1,956 hours, hours are estimated to be closer to 11,500. Daewoo 6 cyl. engine. Boom and 360 grapple have tight pins and bushings. Live heel. Hood 60" slasher has a straight blade, good teeth, adjustable pinned butt board. Lever controls, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Hood S-182 2000
$40,000
John Deere 1210E Forwarder

John Deere 1210E Forwarder

2011 John Deere 1210E Forwarder. Hour meter reads 13,760 hours. New engine has 5,850 hours. Tires on the front are new, rear are estimated at 50%, tracks are included. Rotating cab is in good working order, bunks are straight. Espar preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 1210E 2011
$149,900
Iron Mule 5510 Forwarder

Iron Mule 5510 Forwarder

1989 Iron Mule 5510 Forwarder. Hours are unknown, meter reads 1,747 hours. Ford 4cyl engine. 23.1x26 tires on the front are new, rears are estimated at 50%. Includes an extra tire without rim & chains. Minor leak on boom cylinder. Center and Gafner hydra-loader are tight. Can include extra tires for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Iron Mule 5510 1989
$22,000
John Deere 340D Skidder

John Deere 340D Skidder

1984 John Deere 340D Cable Skidder. Hour meter reads 8,990, unknown if actual hours. 23.1x26 tires are estimated at 60%, Includes extra tires and chains. Center is tight, winch is strong. Snow plow can be included for an additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 340D 1984
$24,750
John Deere 440D Skidder

John Deere 440D Skidder

1989 John Deere 440D Cable Skidder. Hours are unknown. Engine was overhauled. 18.4x26 tires are estimated at 50%, chains are included. Snow plow can be included for an additional cost. Center is tight, winch is strong. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 440D 1989
$29,700
Timbco 445EXL Feller Buncher with Quadco 2900 Head

Timbco 445EXL Feller Buncher with Quadco 2900 Head

2006 Timbco 445EXL Feller Buncher with Quadco 2900 360° Intermittent Head. Hours are unknown, meter reads 4,606 hours. 28" triple grouser pads, undercarriage is estimated at 80%. Leveling system is in good working order. Quadco 2900 Intermittent Head. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco 445EXL 2006
$159,500
Morbark 30/36 Whole Tree Chipper

Morbark 30/36 Whole Tree Chipper

1998 Morbark 30/36 Whole Tree Chipper with Cab & Loader. Meter reads 1,200 but is incorrect. 425hp engine. Needs a new clutch or can be replaced before sale for an additional cost. New infeed chain, tires are good, wireless remote included. Owner states drum is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Morbark 30/36 1998
$56,500
Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher

Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Prentice 210D Unknown
$17,000
John Deere 648GII Skidder

John Deere 648GII Skidder

2001 John Deere 648GII Grapple Skidder with Winch. New engine and hydraulic pump. Rear 30.5x32 tires are estimated at 75%, fronts are estimated at 40%. Includes ring chains that are estimated at 20%. Clutch packs were gone through in 2020. Newer glass, new bearings and seals in rear end. Heat, LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 648GII 2001
$36,900
Ecolog 590D with LogMax 7000 Dangle Head

Ecolog 590D with LogMax 7000 Dangle Head

2010 Ecolog 590D with LogMax 7000 Dangle Head. Hour meter reads 17,813 hours. Mercedes 926 engine. 710/55-34 & 710/50-30.5 bogie tires are estimated at 75% or greater. Valve bank was just rebuilt, all new O-rings. Unit has some welding in the center and on the boom. LogMax 7000 dangle head, variable feed wheels, housing in good condition, pump is newer with 5,500 hours. Webasto preheat system, heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

EcoLog 590D 2010
$100,000
TimberPro TN725C with CF-22 Processing Head

TimberPro TN725C with CF-22 Processing Head

2017 TimberPro TN725C with CF-22 Processing Head. Hour meter reads 9,463 hours. Cummins L9 engine. 24" double grouser pads. JP Skidmore CF-22 processing, measuring system in working order, knives & feed wheels are in good condition. IQAN 10" touch screen control system. Espar preheater. ANSUL fire suppression. Heat, A/C, Bluetooth radio, & LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberpro TN725C 2017
$260,000