Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
2008 CAT 501HD

2008 CAT 501HD

2008 CAT 501HD TRACKED HARVESTER 6 CYL CAT REBUILT ENGINE BY MICHIGAN CAT WITH WARRANTY FOUR ROLLER HEAD

CAT 501HD 2008
$189,000
2008 John Deere 1270D Harvester

2008 John Deere 1270D Harvester

2008 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE HYDRASTATIC DRIVE 480C HEAD 600 RUBBER

John Deere 1270D 2008
$189,000
Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher

Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher

2008 Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher and a Savage Carrier. This equipment has 11,000 hours, engine was rebuilt 6,000 hours, runs and starts good, strong hydraulics and cylinders, self propulsion in good working order, tight boom and grapple, slasher is in good condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 495ML 2008
$95,000
CAT 501 Processor with Fabtek 4 Roller Head ***SOLD***

CAT 501 Processor with Fabtek 4 Roller Head ***SOLD***

2008 CAT 501 with Fabtek 4 Roller Head. Hour meter reads ~20,000 hours. Has had a reman CAT engine installed. 24" triple grouser pads, undercarriage is in good working order. Fabtek 4 roller head has a reman frame, and one feed roller has just been rebuilt. Heat, A/C, and radio in cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

CAT 501 2008
$87,500
CAT 501HD Harvester with Fabtek 4 Roller Head

CAT 501HD Harvester with Fabtek 4 Roller Head

2008 CAT 501HD Harvester with Fabtek 4 Roller Head. Hour meter reads ~14,000 hours. CAT C6.6 engine starts and runs good. 24" single grouser pads. Undercarriage is estimated at 65%. Newer motor and pump with 600 hours. New ICAN computer. New chains on the feed wheel, also has new knives. Preheater. Enclosed cab has heat, A/C, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

CAT 501HD 2008
$105,000
CAT 501HD Processor

CAT 501HD Processor

2008 CAT 501HD Processor with Fixed Head. This machine has 12,000 hours, runs and starts good, like new undercarriage, strong hydraulics. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***REDUCED FROM $164,500.00***

CAT 501HD 2008
$149,000
John Deere 1270D Harvester

John Deere 1270D Harvester

2008 John Deere 1270D Harvester. 11,000 hours. Recent new injectors in engine which runs and starts good. H480 head has been rebuilt. 2 outer drive motors and one inner motor were rebuilt recently. Espar engine, hydraulic, and cab preheat system, strong hydraulics and cylinders, reman work pump and drive pump in the last 500 hours, tight boom and center section, stick and lift cylinders redone, bogies are in good working order, solid rear ends, 700 tires @ 50% with rear tracks, one set of chains. Feed rollers and grab arms are in good condition, Timbermatic HHM 300 computer. Heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1270D 2008
$144,900
John Deere 903J Feller Buncher with FR22 Head

John Deere 903J Feller Buncher with FR22 Head

2008 John Deere 903J Feller Buncher with FR22 Head. Hour meter reads ~18,000 hours. Engine was redone at 12,500 hours. John Deere 6081H engine starts and runs good. Boom and stick bushing have been done at 15,000 hours. Strong hydraulics and cylinders. 24" single grouser pads, undercarriage is at 40%. Enclosed cab has heat, A/C, lights, Sure Grip joystick controls, & TMC computer system. FR22 head is 360° rotating. Saw and carbide teeth are in good shape. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 903J 2008
$44,900
Komatsu PC200 LC-8 with Denharco DMC4140 Delimber ***ON HOLD

Komatsu PC200 LC-8 with Denharco DMC4140 Delimber ***ON HOLD

2008 Komatsu PC200 LC-8 with Denharco DMC4140 Delimber. Cylinders are dry. Hydraulic hoses are dry. Cummins engine. Bypass grapple & top saw on the delimber. Undercarriage at about 30%. 28" double grouser pads. New set of rails and pads that could go with. Denharco DMC4140 Delimber is in good shape. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

Komatsu PC200 LC-8 2008
$90,000
Morbark 30/36 Drum Chipper

Morbark 30/36 Drum Chipper

2008 Morbark 30/36 Drum Chipper. This equipment currently has 4,120 hours, runs and starts good, strong hydraulics, drum and in-feed all are in good working order, maintained and run daily, complete maintenance and repair records available. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Morbark 30/36 2008
$152,900
Morbark 4600XL Wood Hog Horizontal Grinder

Morbark 4600XL Wood Hog Horizontal Grinder

2008 Morbark 4600XL Wood Hog Horizontal Grinder. Hour meter reads 4,562 hours. CAT C3412, 760 HP Engine. Repairs completed at 3,280 hours. New Conveyor Belt, Rebuilt Hammermill including new bearings, rotor plates, rotor rods, hammers, inserts, and rakes. The machine is in good condition overall. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Morbark 4600XL 2008
$270,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$115,000