Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
2004 Fabtek 133 Harvester

2004 Fabtek 133 Harvester

2004 FABTEK 133 TRACKED HARVESTER FABTEK FOUR ROLLER HEAD 6 CYL DEERE

Fabtek 133 2004
$Call for Price
2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 Feller Buncher

2004 570 Hydro Ax with 22" sidecut 1 owner operator 4650 original hours. Has newer carbides, new skylight and windshield, 2 new front firestone tires 28lx26. Joystick controls, heat, air, quick couplers, heat grid and 1 set babac bearpaw chains. 5.9 cummins that does not burn any oil and has no hydraulic leaks. Very tight machine that is greased daily well maintained and ready to go to work. Retired

Hydro-Ax 570 22" Sidecut 2004
$75,000
2004 JOHN DEERE 648GIII

2004 JOHN DEERE 648GIII

2004 JOHN DEERE 648GIII GRAPPLE SKIDDER 6 CYL DEERE POWESHIFT 24.5-32 RUBBER HOUR METER SHOWS 5625 BUT HOURS ARE UNKNOWN

John Deere 648GIII 2004
$64,900
2004 Serco 170 Slasher

2004 Serco 170 Slasher

2004 SERCO 170 SLASHER SELF PROPELLED 6 CYL JOHN DEERE SLASHER TABLE

Serco 170 2004
$64,900
Bandit 2400 Whole Tree Chipper

Bandit 2400 Whole Tree Chipper

2004 Bandit 2400 Whole Tree Chipper. Owner stated that this machine has 3,500 hours, 3412E CAT 860 HP engine, runs and starts good, updated 3 blade disc, strong hydraulics, tight pins and bushings, feed rollers in good working condition. Owner said that this chipper has new bearings 500 hours ago, resealed cylinders and replaced the boom cylinder rod, pilot controls, new rims and tires, good brakes. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Bandit 2400 2004
$135,500
CAT 525B Skidder

CAT 525B Skidder

2004 CAT 525B Single Arch Grapple Skidder. This skidder has a automatic transmission in good working condition, new center pins, new front cradles, 30.5x 32 tires, heat, A/C, 4-wheel drive works good. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

CAT 525B 2004
$45,900
Caterpillar TK711 Harvester

Caterpillar TK711 Harvester

2004 Caterpillar TK711 Harvester with a 2012 Fabtek 240 Head. This machine has 9,000 hours on carrier and 2,000 hours on the head, strong hydraulics and cylinders, undercarriage is @ 75% with 24" single grouser pads, tight boom. Head and measuring system are in good working, feed rollers and grab arms are in good order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

CAT TK711 2004
$Call for Price
Chambers Delimbinator Debarker

Chambers Delimbinator Debarker

2004 Chambers Delimbinator Debarker. Owner stated this is a good solid machine, new shaft bearings. Ready for the woods. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Chambers Delimbinator 2004
$55,000
CTR 950 Skidder

CTR 950 Skidder

2004 CTR 950 Single Arch Grapple Skidder with Winch. Hour meter reads 4,965 hours on new 5.9 Cummins 174 HP engine, runs and starts good, strong hydraulics and transmission. 40,000 lbs. winch. 30.5 x 32 tires. New blade cylinders. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

CTR 950 2004
$Call for Price
CTR 950 Skidder

CTR 950 Skidder

2004 CTR 950 Dual Arch Grapple Skidder with Winch. This skidder has a 5.9 Cummins 174 HP engine rebuilt 300 hours ago, center could use some attention, 40K winch, no grapple rotor, 1000 hours on new pump, blade cylinder rebuilt. 28Lx26 tires. Needs some work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

CTR 950 2004
$Call for Price
Fabtek FT 133 Processor with a 4 Roller Head

Fabtek FT 133 Processor with a 4 Roller Head

2004 Fabtek FT 133 Processor with a Fabtek 4 Roller Head. This machine has 12,991 hours, runs and starts good, strong hydraulics and cylinders, head is in working order, tight pins and bushings, undercarriage is in good working condition, heat, A/C, and lights. Kawasaki pump and updated U/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Fabtek FT133 2004
$83,500
Hydro-Ax 470 Feller Buncher ***SOLD***

Hydro-Ax 470 Feller Buncher ***SOLD***

2004 Hydro-Ax 470 Feller Buncher. This machine has 8,000 hours, runs and starts good, newer Cummins engine about 700 hours ago, new radiator, tight center section, strong hydraulics, grab arms and cylinders in good order. Disc has a few cracks will need attention soon, 28Lx26 tires @ 50%, tight joystick controls, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***SOLD***

Hydro-Ax 470 2004
$42,500