Sort By:   GridGallery
Photo Title
Make Model Year Price
2001 Timberjack 1710B PRICE DROP

2001 Timberjack 1710B PRICE DROP

2001 Timberjack 1710B forwarder in very good condition, double extension crane, Fully serviced ready for work, New grab, Reconditioned engine, New centre section, Good tyres all around, Good spare wheel, 1 set tracks (70%), Can be seen in Wells VT

Timberjack 1710B 2001
$75,000
CAT 320B w/ Propac Stroke Delimber

CAT 320B w/ Propac Stroke Delimber

2001 CAT 320B with a Propac Stroke Delimber. Owner stated that this unit has 4,000 hours on the engine, runs and starts good, new boom 2 years ago, new fuel pump 200 hours ago, strong hydraulics, delimber has good undercarriage, newer valve bank, good heat and A/C. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

CAT 320B 2001
$42,500
CAT 535B Skidder

CAT 535B Skidder

2001 CAT 535B Dual Arch Grapple Skidder with Winch. This skidder has 12,034 hours, runs and starts good, strong hydraulics and cylinders, few minor leaks, transmission is in good working condition, strong winch, 5/8 cable, little play in center not bad, 30.5x32 tires, 3 are newer, 1 @ 30%, chains all around rear are newer, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 535B 2001
$42,500
Fabtek 546C 6 Wheel Double Bunk Forwarder

Fabtek 546C 6 Wheel Double Bunk Forwarder

2001 Fabtek 546C 6 Wheel Double Bunk Forwarder. This equipment had an overhauled engine 500 hours ago, runs and starts good, pre-heat system, newer computer, strong hydraulics and cylinders, transmission in good order, cradles and axles are in good condition, tight boom and grapple, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Fabtek 546C 2001
$69,500
John Deere 648GIII Skidder ***SOLD***

John Deere 648GIII Skidder ***SOLD***

2001 John Deere 648GIII S/A Grapple Skidder. This machine has had an engine rebuild 500 hours ago,15,000 hours total, tight pins and bushings, strong hydraulics, tight grapple, tires are @ 50%, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

John Deere 648GIII 2001
$63,500
John Deere 653G Feller Buncher ***SOLD***

John Deere 653G Feller Buncher ***SOLD***

2001 John Deere 653G Feller Buncher with a Waratah FS 20" Felling Head. This machine has a John Deere 6068H engine runs out well, starts reliably, Waratah cutting head is in good shape. New bearing in the head, newly replaced jib boom pin, recently serviced and ready for the woods. undercarriage is @ ~75%, sprockets, rollers, idlers, pads are all in good working order, tight pins and bushings all around, clean cab, all gauges work, heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933 for more information. Machine is located in Northcentral USA. ***SOLD***

John Deere 653G 2001
$61,500
Ponsse Caribou 8 Wheeled Double Bunk Forwarder

Ponsse Caribou 8 Wheeled Double Bunk Forwarder

2001 Ponsse Caribou 8 Wheeled Double Bunk Forwarder. This machine has a 4cyl Mercedes engine, runs and starts good, 16,000 hours, strong hydraulics, new traction pump and transfer case, bogies in good working order, new joystick controls, tight boom and grapple, heat, A/C, lights, new tracks, and chains. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Caribou 2001
$114,900
Prentice 384 Loader with a Hudson Slasher and Delimber

Prentice 384 Loader with a Hudson Slasher and Delimber

2001 Prentice 384 Loader with a Hudson Slasher and Delimber. This machine has a John Deere 6068T engine, is in good operating condition, strong hydraulics, tight pins and bushings, cold A/C, heat, radio, good tight loader, has all the glass, pumps are strong, loader shows 17,000 hours. New turn gear and new turn motor on grapple. Contact Erik @ Red Pine Equipment 218-70-0933. Machine located in Southeast USA.

Prentice 384 2001
$35,500
Tigercat 630B Grapple Skidder w/ Winch

Tigercat 630B Grapple Skidder w/ Winch

2001 Tigercat 630B Grapple Skidder with Winch. Owner stated that this unit has around 10,500 hours runs and starts good, reinforced and extended boom, tight pins and bushings, strong hydraulics. Owner said that this skidder has 30.5x32 tires @ 40%, winch works needs cable, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Canada.

Tigercat 630B 2001
$46,500
Timbco 425D Feller Buncher ***SOLD***

Timbco 425D Feller Buncher ***SOLD***

2001 Timbco 425D Feller Buncher with Quadco 22" Hot Saw. This machine has ~9,000 hours, Cummins engine, runs and starts good, strong hydraulics and cylinders, undercarriage and track in good order, 22" Quadco hot saw in good working order, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timbco 425D 2001
$Call for Price
Timberjack 1010D 6 Wheel Forwarder

Timberjack 1010D 6 Wheel Forwarder

2001 Timberjack 1010D 6 Wheel Forwarder. This machine has tracks on rear, 700 tires, chains on front, 28L tires, double bunk forwarder, joystick controls, push button steering, Log Lift 60F loader with extenda boom and full rotation Sure Grip grapple. Cummins 4BT engine, runs and starts good, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Timberjack 1010D 2001
$Call for Price
Timberjack 1110 8 Wheeled Forwarder**SOLD**

Timberjack 1110 8 Wheeled Forwarder**SOLD**

2001 Timberjack 1110 8 Wheeled Forwarder. This machine has been very well maintained, 22,500 frame hours, 5.9 cummins engine, runs and starts good, Espar pre-heating system, completely new hydraulics at 17,000 hours (including hydraulic pumps, motors, main crane pump, cylinders, and a complete system flush) hydrostatic pump was redone in 2012. Tight pins and bushings, tight controls, Hultdins grapple has new pins and new rotator. Front tires are @ 50-60%, back tires are around 25%. Tracks are @ 20%, tire chains are @ 75%, has A/C, heat, and LED lights. Has parts and service manuals. Machine is currently working daily. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.***SOLD***

Timberjack 1110 2001
$87,500