Sort By:   GridGallery
Photo Title
Make Model Year Price
 2000 Valmet 840 8x8 Forwarder/Skidder

2000 Valmet 840 8x8 Forwarder/Skidder

Nice working owner operated forwarder. Tires are all around 50%. Size is 700/45/26.5. Just a little over 14,000 original hours. Heat and A/C. Good working Espar preheater. 6 cylinder Sisu engine runs like a top. Now blow by. Quiet, durable, and very fuel efficient engine. Hydrostatic transmission shifts as it should. One set of tracks included with the sale price.

Valmet 840 2000
$69,500
2000 Fabtek 346B Forwarder

2000 Fabtek 346B Forwarder

FABTEK 346B DOUBLE BUNK FORWARDER 4 CYL DEERE POWERSHIFT JOYSTICK CONTROLS

Fabtek 346B 2000
$74,900
2000 Timberjack 1110NA 8wd Forwarder

2000 Timberjack 1110NA 8wd Forwarder

2000 Timberjack 1110NA 8wd Forwarder. Cummins 5.9 engine. Loglift loader w/028 Grippen bucket. Joystick controls. Tires are 700m , rears at 90% & fronts at 40% to 60%.

Timberjack 1110NA 2000
$82,000
2000 TIMRICK 2750 Slasher Loader

2000 TIMRICK 2750 Slasher Loader

Call for pricing. 6068 engine has only 7,500hrs. Call for complete work order info ($80,000 work order completed 647hrs ago): All Booms re-pinned/bushed. Align-boring done where required. All Hydraulics Rebuilt. New Hoses. All Cylinders Rebuilt. Swing Boxes Rebuilt... Too much to fully list!

Timrick 2750 2000
$Call for Price
2000 Valmet 644 Forwarder

2000 Valmet 644 Forwarder

2000 VALMET 644 SINGLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS EXTENDA BOOM 23.1-26 RUBBER REAR TIRES ARE NEW

Valmet 644 2000
$74,900
Bandit Beast 3680 Horizontal Grinder

Bandit Beast 3680 Horizontal Grinder

2000 Bandit Beast 3680 Horizontal Grinder. Owner stated this is a solid used horizontal grinder/chipper, well maintained, comes with screens for grinding and chipping, runs strong, no major repairs. Owner stated this machine has a 600 HP Deere engine that does not smoke or use a lot of oil, good feed deck and discharge belt, this is a terrific buy for a clearing contractor or for storm cleanup. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Bandit Beast 3680 2000
$109,850
Barko 885B Feller Buncher

Barko 885B Feller Buncher

2000 Barko 885B Feller Buncher. This machine has a Cummins engine, runs and starts good, new drive motor, pretty tight center and head, strong hydraulics, head is in good working condition, tires are @ 30%, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 885B 2000
$35,900
CAT 320B with a Denharco 4400 Stroke Delimber

CAT 320B with a Denharco 4400 Stroke Delimber

2000 CAT 320B with a Denharco 4400 Stroke Delimber. This machine has 11,600 hours, 2000 on new engine and computer, undercarriage is in good working condition, solid boom, delimber has a 46 tooth heavy duty topping saw, strong hydraulics, updated on all oils, Afex fire system, heat, A/C, and radio. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 320B 2000
$92,500
Clark Ranger H67 D/A Grapple Skidder ***SOLD***

Clark Ranger H67 D/A Grapple Skidder ***SOLD***

2000 Clark Ranger H67 Dual Arch Grapple Skidder with Winch. Owner stated that this machine has 7,578 hours, Cummins 5.9 engine that has been rebuilt, tight pins and bushings, strong hydraulics. Owner said that this unit has a strong Powershift transmission, tires 2 @ 50% and 2 @ 30% with chains, good glass, heat, A/C needs to be charged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Canada. ***SOLD***

Clark Ranger H67 D/A 2000
$39,500
Clark Ranger H67 Skidder

Clark Ranger H67 Skidder

2000 Clark Ranger H67 Dual Arch Grapple Skidder. This machine has a Cummins 5.9 engine, runs and starts good, 8,800 hours, 3 speed Clark shuttle shift transmission, strong hydraulics and cylinders, Esco grapple, 30.5 x32 tires @ 30%, ice chains all around, has a little play on the bottom center pin, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Canada.

Clark H67 2000
$39,500
CTR 550 Pull Through Delimber with Buck Saw ***SOLD***

CTR 550 Pull Through Delimber with Buck Saw ***SOLD***

2000 CTR 550 Pull Through Delimber with Buck Saw. This equipment has low hours, saw and delimber are in good working condition, strong hydraulics. Contact Erik @ Red Pine Equipment 218-720-0933. Delimber is located in Northeast USA. ***SOLD***

CTR 550 2000
$8,000
Fabtek FT 133 Harvester with a Fabtek 4 Roller Head

Fabtek FT 133 Harvester with a Fabtek 4 Roller Head

2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This equipment runs and starts good, strong hydraulics and drive system, undercarriage is @ 50%, tight boom. Fabtek 4 roller head is in good working order, heat, A/C, and lights. Also has extra used parts: Hydraulic pump, 2 roller motors, 2 top spindles, rollers, few rams, 2 Dallas chips, 2 new buttons for joy sticks, new solenoid for valve bank, saw motor, saw box, top knives and other misc. items. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Fabtek FT133 2000
$56,500