Photo |
Title
|
Make | Model | Year | Price |
Bandit Beast 3680T Horizontal Grinder ***SOLD***2017 Bandit Beast 3680T Horizontal Grinder. Hour meter reads 400 hours. CAT 1,050 HP engine starts and runs good. Belts are in good condition. Caterpillar 325EL undercarriage is in good working order. 14' 9" long x 60" steel infeed conveyor. 20" diameter feed wheel controlled via remote control. 42" diameter x 63" wide cuttermill with 30 teeth. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. ***SOLD*** |
Bandit | Beast 3680T | 2017 |
$Call for Price
|
|
Bandit Intimidator 15XP Chipper2021 Bandit Intimidator 15XP Chipper. Hour meter reads 1,543 hours. Ford 6.2L 165 HP engine. 37" diameter drum, 2 knife split pocket 5/8" chip. Single axle allow for towing as non-CDL trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | Intimidator 15XP | 2021 |
$49,500
|
|
Barko 160A Loader1989 Barko 160A Loader. This unit has a good running Cummins engine, decent pins and bushings, strong hydraulics and cylinders, few minor leaks, tight lever controls, carrier has good brakes and tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Barko | 160A | 1989 |
$14,500
|
|
Barko 160A Log Loader with 360 Grapple1993 Barko 160A Log Loader with 360 Grapple. This equipment has a 4 cyl. Detroit engine. Continuous rotation grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
Barko | 160A | 1993 |
$15,000
|
|
Barko 160C Loader with Bucksaw1999 Barko 160C Loader with Bucksaw. Hour meter reads 12,000 hours. John Deere engine starts and runs good. No blowby. Loader is tight. CSI bucksaw with 9' table. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Barko | 160C | 1999 |
$26,000
|
|
Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 160D | 1999 |
$44,500
|
|
Barko 225 Log Loader with CTR 450 Delimber2000 Barko 225 Log Loader with CTR 450 Delimber. Brand new hydraulic pump, turn table, pins and bushings in the boom. Bucket has a new rotate bearing and turn motor. CTR 450 delimber has good knives and is in good working order. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Barko | 225 | 2000 |
$40,000
|
|
Barko 240 with CF18 Harvesting Head2015 Barko 240 with CF18 Harvesting Head. Hour meter reads 5,000 hours. Cummins 6.7L 220hp engine. 24" double grouser pads, undercarriage is estimated at 25%. CF18 harvesting head, measuring system is in good working order with good feed wheels. Webasto preheat system. Heat, A/C, radio, & LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Barko | 240 | 2015 |
$297,500
|
|
Barko 260B Feller Buncher with ProPac 22 360° Head2019 Barko 260B Feller Buncher with ProPac 22 360° Head. Hour meter reads 60 hours. Cummins QSB6.7 Tier 4 Final diesel engine. Undercarriage is estimated at 100%, includes a set of 34" triple grouser pads & 28" single grouser pads. Proheat preheat system. IQAN-MD4 display. Heated air-ride seat, heat, A/C, radio, lights. On-board air compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Barko | 260B | 2019 |
$420,000
|
|
Barko 295 Loader with CSI Delimber & Bucksaw2003 Barko 295 Loader with CSI Delimber & Bucksaw. Hour meter reads 11,000 hours. Cummins 6BT engine starts and runs good. Delimber and bucksaw are in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Barko | 295 | 2003 |
$43,500
|
|
Barko 495 Self-Propelled Loader with Hood 60" Slasher2014 Barko 495ML Magnum Self-Propelled Loader with Hood 60" Slasher. Hour meter reads 10,500 hours. Cummins 6.7L engine. Boom is tight. Serco single pin full rotation bypass bucket with live heel. 6x6 Self-Propelled carrier is in working order, good tires and brakes. Webasto preheat system. Hood 60" slasher, good blade and teeth, high-speed volvo hydraulic motor for the saw. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Barko | 495 | 2014 |
$72,500
|
|
Barko 495B Loader with CTR Delimber and Hanfab 60" Slasher2019 Barko 495B Loader with CTR Delimber and Hanfab 60" Slasher. Hour meter reads 5,700 hours. Live heel. Preheat system. Loader is tight, has good tires, landing gear in good working order. CTR delimber. 2019 Hanfab 60" slasher. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Barko | 495B | 2019 |
$199,500
|