Logging Equipment For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Daewoo LL220 with Propac 453 Delimber 2000 Daewoo LL220 with Propac 453 Delimber. Hour meter reads 9,880 hours. New Daewoo engine and rotary motor for the hydraulics with less than 1,000 hours. 24" double grouser pads, undercarriage is estimated at 75%, new tracks pins & rollers, some new pads and hardware. Propac 453 delimber is in good condition, bushings were just replaced, boom is straight. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Daewoo	LL220	2000	$34,500
	Danzco T18 Delimber *SOLD* 2004 Danzco T18 Delimber. Has a Yanmar diesel engine. One owner. Approximately 500 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. *SOLD*	Danzco	P18	2004	$Call for Price
	Delfab DF703 Feller Buncher 2021 Delfab DF703 Feller Buncher. Hour meter reads 677 hours. Cummins QSB 4.5L 130hp engine. 28Lx26 tires, estimated at 95% with a set of mono tracks. DF718 Hi-Speed 18" disc saw. Package includes a Denis Cimaf mulching head & spare bunching head. Back-up camera. Independent foot pedal control. Heat, A/C, and lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.	Delfab	DF703	2021	$212,500
	Diamond Z 1136 Tub Grinder 2010 Diamond Z 1136 Tub Grinder. Hour meter reads 3,700 hours. CAT C13 engine starts and runs good, 500hp. Crate of additional parts included. Oil analysis checks out great. Used mostly for regrind. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.	Diamond Z	1136	2010	$190,000
	Doosan DX225LL-5 Track Loader with Jewell 58” Grapple 2016 Doosan DX225LL-5 Track Loader with Jewell 58” Grapple. Hour meter reads 3,658 hours. 28" double grouser pads, undercarriage is estimated at 80%. Live heel and Jewell 58" grapple. Boom is tight. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.	Doosan	DX225LL-5	2016	$142,500
	Eco Log 550B Processor with a Logmax 5000 Head *SOLD* 1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *SOLD*	Eco Log	550B	1998	$22,500
	Ecolog 590D with LogMax 7000 Dangle Head 2010 Ecolog 590D with LogMax 7000 Dangle Head. Hour meter reads 17,813 hours. Mercedes 926 engine. 710/55-34 & 710/50-30.5 bogie tires are estimated at 75% or greater. Valve bank was just rebuilt, all new O-rings. Unit has some welding in the center and on the boom. LogMax 7000 dangle head, variable feed wheels, housing in good condition, pump is newer with 5,500 hours. Webasto preheat system, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	EcoLog	590D	2010	$100,000
	Fabtek 133 with Fabtek 4 Roller Processing Head 2005 Fabtek 133 with Fabtek 4 Roller Processing Head. Hour meter reads 18,979 hours, crane hours read 8,635 hours. John Deere 6068 engine. 24" double grouse pads, undercarriage is estimated at 90%. Proheat preheat system. FT18 processing head has good feed wheels, minimal welding, & working measuring system. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	133	2005	$90,000
	Fabtek 153 Harvester 2001 Fabtek 153 Harvester has a JD reman 6068 power unit that is in good working order. Starts and runs good. Just went through undercarriage and it's in excellent condition. All 4 Rotate motors just resealed, main pump is new, head tilt cylinder just resealed, and both valve banks just resealed. Independent measuring wheel. New glass. Heat, AC (just redone). Head is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	153	2001	$79,500
	Fabtek 546B Forwarder 1999 Fabtek 546B 6 Wheel Forwarder. Hour meter reads 7,399 hours. John Deere engine starts and runs good. 30.5x32 tires in the front estimated at 25%. 700 tires in the rear are estimated at 70%. Center and crane are tight. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	546B	1999	$82,500
	Fabtek 546B Forwarder *SOLD* 1997 Fabtek 546B 6 Wheeled Forwarder. Hour meter reads 26,340 hours. John Deere 6068T engine is newer & starts and runs good. This machine was only ran in the summer. 710x26-45 tires are estimated at 85%. Cab has heat & lights. Has a new hand pump for cab, orbital motor has been gone through, re-hosed boom, new hydraulic pump, & bogies resealed recently. New center pins and bearing in 2016 with 2,000 hours. New Lexan windows, hydraulic cooler with manual switch. New axle and bearing in the rear left bogie with receipts. Newer seat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Fabtek	546B	1997	$73,500
	Fabtek 546C Forwarder 2000 Fabtek 546C 6 Wheel Double Bunk Forwarder. This machine has a 6.8 PowerTec engine, runs and starts good, rebuilt transmission and converter, Preheater. Strong hydraulics and cylinders, front tires are 30.5x32, tracks and chains, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	546C	2000	$89,900