Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Bandit 3680 Beast Horizontal Grinder

Bandit 3680 Beast Horizontal Grinder

1997 Bandit 3680 Beast Horizontal Grinder. John Deere engine starts and runs good. 375 HP. Remote control. 300-500 yards per hour. 500 gallon fuel tank, 140 gallon hydraulic tank. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Bandit 3680 Beast 1997
$97,500
CAT 525 Skidder

CAT 525 Skidder

1997 CAT 525 Grapple Skidder with Winch. Hour meter reads 10,000 hours. CAT engine starts and runs good. 30.5x32 tires, tires are in good shape. Brakes are good. Center pins & arch pins are tight and have both been gone through. Winch is strong, windows are good. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 525 1997
$34,500
Fabtek 546B Forwarder ***SOLD***

Fabtek 546B Forwarder ***SOLD***

1997 Fabtek 546B 6 Wheeled Forwarder. Hour meter reads 26,340 hours. John Deere 6068T engine is newer & starts and runs good. This machine was only ran in the summer. 710x26-45 tires are estimated at 85%. Cab has heat & lights. Has a new hand pump for cab, orbital motor has been gone through, re-hosed boom, new hydraulic pump, & bogies resealed recently. New center pins and bearing in 2016 with 2,000 hours. New Lexan windows, hydraulic cooler with manual switch. New axle and bearing in the rear left bogie with receipts. Newer seat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Fabtek 546B 1997
$73,500
Hydro Ax 511E Feller Buncher

Hydro Ax 511E Feller Buncher

1997 Hydro-Ax 511E Feller Buncher. This machine has a 5.9 Cummins engine, runs and starts good, 22" Disc and Koehring head, good condition, tight pins and bushings. Strong hydraulics, newer hydraulic cooler, starter, alternator, and battery. 28Lx26 tires in good condition, heat, A/C needs to be charged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Hydro-Ax 511E 1997
$38,000
Hydro-Ax 511EX Feller Buncher

Hydro-Ax 511EX Feller Buncher

1997 Hydro-Ax 511EX Feller Buncher. This unit has around 7500hrs, Cummins 5.9 engine, runs and starts good, strong hydraulics, newer pump, solid center section, head is a Waratah 22" head in good working condition, bottom pins have a little play, newer steer box, 34.00x25 tires 60 to 70%, heat a/c and lights. Contact Erik @ Red Pine Equipment 218-720-0933.

Hydro-Ax 511EX 1997
$42,500
Hyundai Robex 210 LC-3 Yoder

Hyundai Robex 210 LC-3 Yoder

1997 Hyundai Robex 210 LC-3 Yoder. Hour meter reads 8,838 hours. 28" triple grouser pads, undercarriage is estimated at 75%. Dry valve bank. Tight boom & thumb bucket. Hydraulics are strong. Enclosed cab has heat & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hyundai Robex 210 LC-3 1997
$98,000
John Deere 653E Feller Buncher

John Deere 653E Feller Buncher

1997 John Deere 653E Feller Buncher. Hour meter reads 8,920 original hours. John Deere 6068T starts and runs good. 36" double grouser pads, undercarriage is estimated at 60%. New idler, sprocket, planetary, rotary manifold seals, swing gear case seals & bearings. Extra auxiliary pump. Cameco 20" 30° tilt felling head, Eureka carbide teeth. Heat, A/C compressor is new. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 653E 1997
$61,500
John Deere 690E with Propac 453 Delimber

John Deere 690E with Propac 453 Delimber

1997 John Deere 690E with Propac 453 Delimber. Hours are unknown, new 6068T engine was installed in 2017 with receipts. Drive motors in good working order, 32" triple grouser pads, undercarriage is estimated at 75%. Propac 453 is in good condition, newer boom is straight, knives and hoses are good. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 690e 1997
$44,500
Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

1997 Komatsu 200LC-6 with a 1998 Lim-Mit 2000B Delimber. This machines main pump was replaced three years ago, newer Cummins 5.9 engine, undercarriage is in good condition, straight boom, delimber in good working condition. tight controls, good hoses, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD***

Komatsu 200LC-6 1997
$35,900
Link Belt 3400Q Stroke Delimber

Link Belt 3400Q Stroke Delimber

1997 Link Belt 3400Q Stroke with Denis Boom Delimber. This machine has a re-built Isuzu motor (800 to 1,000 hours ago) runs and starts great, this machine also has new knives, new bushings and pins, and a new turn table. Owner said that the undercarriage is about 75%, strong hydro, joystick controls, will need a few small fixes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA.

Link Belt 3400Q 1997
$18,900
Link-Belt 2800 with a Denharco DT3500 Delimber

Link-Belt 2800 with a Denharco DT3500 Delimber

1997 Link-Belt 2800 with 1998 Denharco DT3500 Delimber. This equipment runs and starts good, around 11,500 hours, strong hydraulics, cylinders and hoses are in order, straight boom and inner boom, knives are in good working condition, butt plate, undercarriage is @ 30%, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Link Belt 2800 1997
$51,500
Morbark Model 23 NCL Chipper

Morbark Model 23 NCL Chipper

1997 Morbark Model 23 NCL Chipper. This machine has 4,200 hours, CAT 550 engine, runs and starts good. Machine was rebuilt in contractors shop 800 hours ago including the following items: new wear plates, belly pans and head liners, new clutch, new in-feed rollers, wireless remote. Chute is in good condition. Dirt separator, this chipper is in excellent shape for the age, produces a very consistent chip. Set up for 7/8" chip currently. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark Model 23 1997
$94,900