Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
![]() |
Portable Generator and Welder Set UpPortable Generator and Welder Set Up. This equipment has a Deutz engine, runs and starts good, welder is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
- | - | Unknown |
$Call for Price
|
![]() |
Fabtek 546C Double Bunk 6 Wheel Forwarder2001 Fabtek 546C Double Bunk 6 Wheel Forwarder. This equipment has a new John Deere 6068T crate engine 1,000 hours ago, strong hydraulics and cylinders. Pump was gone through same time as new engine, PowerShift transmission, new center section 1,000 hours ago. Bogies are in good working order, tight boom and SureGrip 360 grapple, Pro-Heat system. Straight bunks, new rear and side glass, 710 rear tires @ 75% with tracks and 30.5 x 32 front tires @ 75%, blade. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | 546C | Unknown |
$88,500
|
![]() |
Morbark 636 DebarkerMorbark Model 636 3 Phase Electric Debarker. 2 Linclon 100hp electric motors for debarker and conveyor. 50hp Lincoln Electric motor for live deck. Enclosed cab with controls. 60' in-feed trough, 60' out-feed trough. Bark conveyor included as well. 3 strand live deck, 20' width. Machine operates as it should and was working daily until recently. Buyer will be responsible for disassembling and moving equipment prior to 1/15/2020. Equipment located near Wilmington, NC. Seller will assist in arranging transport. |
Morbark | 636 | Unknown |
$150,000
|
![]() |
CAT 511 Feller Buncher w/ a Quadco Head ***SOLD***2010 CAT 511 Feller Buncher with a 2010 Quadco Head. This equipment has a C9 CAT engine, hour meter reads 7,800 hours, clean machine. New rotating motors in head, new teeth and holders, repacked closing and accumulator cylinders. New injectors approximately 1,000 hours ago (done by Ziegler CAT). New water pump 200 hours ago. Newer Jib cylinder. 35-1/2" pads on machine (comes with an extra set of 24" high grouser rails) Webasto pre heater, heat, A/C, and LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
CAT | 511 | Unknown |
$134,900
|
![]() |
48' Office Container48' Office/Lunchroom Container. This container is wired and insulated, has it's own trailer. Can use metal stairs or set on ground, A/C and Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
- | 48' | Unknown |
$Call for Price
|
![]() |
2000 Savage 42' Rail Trailer with Serco 7000 Loader2000 Savage 42' Rail Trailer with Serco Loader. This trailer has steel bunks, front gate, air ride. Good tires and brakes, solid frame. Serco 7000 loader has a tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Serco | 7000 | Unknown |
$24,500
|
![]() |
Savage 42' Rail Trailer with Serco 7000 Loader2004 Savage 42' Rail Trailer with Serco 7000 Loader. This trailer has a spread axles, air ride suspension, removable bunks, good brakes and tries. Serco 7000 has a tight boom and grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Serco | 7000 | Unknown |
$24,900
|
![]() |
John Deere 440C Skidder ***SOLD***John Deere 440C Skidder. This is a nice older skidder, dry and tight, 18.4 x 26 rubber in good condition, 1 set of chains, recently serviced. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
John Deere | 440C | Unknown |
$26,000
|
![]() |
CAT 501HD Processor with Fabtek PF-48 Fixed 4 Roller Head2016 CAT 501HD Processor with Fabtek PF-48 Fixed 4 Roller Head. Hour meter reads 3,100 hours, runs and starts good, strong hydraulics and cylinders. Extras include: Jet Fit Bar System, auto grease. Pre-heater, fire suppression, 24" double grouser pads. Undercarriage is @ 80% and is in very good shape. Fabtek head and measuring system are all in good working order. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
CAT | 501 HD | Unknown |
$295,000
|
![]() |
Timberjack Log SkidderThis is an older skidder that is in good condition, and is restorable. It will need some work to make it usable. |
- | - | Unknown |
$8,000
|
![]() |
Hanfab 72" Pull Behind SlasherHanfab 72" Pull Behind Slasher. This equipment has a straight blade, good teeth with a few extras, solid frame, butt board is in good order. Good tires, pintle hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Slasher is located in Northcentral USA. |
Hanfab | 72 | Unknown |
$18,500
|
![]() |
CTR 60" SlasherCTR 60" Slasher with Adjustable Butt Board and Delimber Knife. This equipment has an adjustable butt board, delimber knife, straight blade, good teeth, strong hydraulics and cylinders, good hoses, decent tires, pintle hitch, solid frame. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
CTR | 60" | Unknown |
$10,500
|