Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Ergo Harvester ***SOLD***

Ponsse Ergo Harvester ***SOLD***

2007 Ponsse Ergo Harvester with a C-4 Crane and H-7 Head. This machine has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, tight boom and head, strong pumps, newer feed motors, delimbing knives are in decent condition, grab arms are in good order, strong cylinders, LED lights, bogies and axles are in good order. Webasto pre-heat system, computer and measuring system in good working condition, 710/45/26.5 tires @ 50%, heat, lights, and radio. A/C needs to be charge, Regular service and oil changes. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Ponsse Ergo 2007
$132,500
Tigercat 822 Processor with a Rolly III Head

Tigercat 822 Processor with a Rolly III Head

2007 Tigercat 822 Processor with a Rolly III Head. This machine has a Newer Cummins engine with 1,100 hours, runs and starts good, Pro Heat system. New Rolly III XTHP R24B Head with 500 hours on head, Woodland computer. No top saw, new undercarriage, new 30" double grouser tracks, new sprockets and idlers with 0 hours. Final drives are one year old. Strong hydraulics and cylinders, tight boom, has a new extra feed roller motor to go with. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Tigercat 822 2007
$249,000
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2007 John Deere 648GIII Dual Arch Grapple Skidder with Winch. This skidder has 820 hours on a new engine and wiring harness. New Direct Drive transmission, strong hydraulics and cylinders, decent center section, all axles and cradles are in good order, arch and grapple are tight. 30.5x 32 tires @ 45-65% with a new set of Bear Claw chains. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648GIII 2007
$68,500
Valmet 415EX Harvester with a Rolly II Head

Valmet 415EX Harvester with a Rolly II Head

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has a 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan, pumps are all in good order, & were all recently pressure checked, undercarriage is @ 95%. Rollers, idlers, sprockets, & 24” double grouser pads were all gone through. New computer DASA 4 one year ago, measuring system is accurate, valve bank was rebuilt 1 year ago on the head. Feed rollers and grab arms are all in good order, new head rotator, new main boom no cracks or welds. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 415EX 2007
$79,500
2007 Tigercat 1055 Forwarder

2007 Tigercat 1055 Forwarder

2007 TIGERCAT 1055 13000hrs

Tigercat 1055 2007
$175,000
Prentice 2384 Loader with a 426 CTR Delimber ***SOLD***

Prentice 2384 Loader with a 426 CTR Delimber ***SOLD***

2007 Prentice 2384 Loader with a 426 CTR Delimber. This loader has a Cummins QSB engine, runs and starts good, 10,905 hours, strong hydraulics and cylinders, Rotobec grapple, boom and grapple are in good order, CTR delimber is in good condition, carrier has good brakes and tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD***

Prentice 2384 2007
$54,500
CAT 525C Skidder ***SOLD***

CAT 525C Skidder ***SOLD***

2007 CAT 525C Single Arch Grapple Skidder with a Winch. Hour meter reads 10,500 hours, runs and starts good, transmission is in good order, strong hydraulics and cylinders, new center section, new injector and wiring harness, arch has some play - normal wear, grapple and winch are in good working order, tight controls, heat, A/C may need to be charged, 30.5 x 32 tires, DD chains and SD chains, DD chains new, will need a new left door. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

CAT 525C 2007
$42,500
Morbark 23 NCL Whole Tree Chipper

Morbark 23 NCL Whole Tree Chipper

2007 Morbark 23 NCL Whole Tree Chipper. This equipment has a CAT 3412 750 HP engine, runs and starts good, engine was turned down to 750, new clutch, knives and disc are all in good work order, hydraulic feed wheel is in good condition, remote control, Hydraulic swivel/telescoping discharge spout, good brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark 23 NCL 2007
$150,000
CAT 525C Grapple Skidder ***SOLD***

CAT 525C Grapple Skidder ***SOLD***

2007 CAT 525C Grapple Skidder with Winch. This skidder has 9,000 hours, runs and starts good, strong hydraulics and transmission, winch is in good working order may need a few bells, tight center section, grapple is tight, continuous rotation. Tires are good all the way around, heat, A/C, and radio. Door is removed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

CAT 525C 2007
$37,500
Concept Products Shred All D5600 Horizontal Grinder *SOLD*

Concept Products Shred All D5600 Horizontal Grinder *SOLD*

2007 Concept Products Shred All D5600 Horizontal Grinder. This equipment has 692 hours, 6 cyl. John Deere turbo diesel engine, approx 175 HP. Remote feed and manual feed, magnetic discharge head. Belts are in great shape, recent service, extra replaceable teeth, 2" screen, easy set up and portability. Rear conveyor slides under machine for easier transport and storage. Can be pulled by pick up truck, has electric trailer brakes. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipmentt is located in Northeast USA. ***SOLD***

Concept Products Shred All D5600 2007
$72,500
Valmet 415EX Harvester ***SOLD***

Valmet 415EX Harvester ***SOLD***

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has 9,700 hours, 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan. Pumps are all in good order, all were recently pressure checked. Undercarriage is @ 80%. Rollers, idlers, sprockets, 24" double grouser pads were all gone through. New Computer DASA 4 one year ago, measuring system is accurate, valve bank rebuilt 1 year ago on the head, feed rollers and grab arms are all in good order, new head rotator. New main boom, no cracks or welds. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Valmet 415EX 2007
$122,500
Tigercat 620C Skidder

Tigercat 620C Skidder

2007 Tigercat 620C Dual Arch Grapple Skidder. This machine has been completely gone through, engine and pumps, rear end was just redone, strong hydraulics and cylinders, tight center and arch pins, square stock grapple, 30.5x 32 tires @ 50% chains all around @ 60%. Heat,A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Tigercat 620C 2007
$54,500