Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 360D Skidder with Winch

Timberjack 360D Skidder with Winch

2005 Timberjack 360D Grapple Skidder with Winch. This equipment has a John Deere 6068 engine, runs and starts good, strong hydraulics and transmission, cylinders and winch are in good working order. 23.1 x 26 tires, new ring chains on front, ice chains on the rear, 12,500 original hours. Heat, A/C, and lights. Tight machine. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberjack 360D 2005
$75,000
Hanfab 60" Pull Behind Slasher ***SOLD***

Hanfab 60" Pull Behind Slasher ***SOLD***

2005 Hanfab 60" Pull Behind Slasher. This equipment has a strong motor, decent hoses, straight blade, good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hanfab 60 2005
$7,900
2005 Timberjack 608S Feller Buncher

2005 Timberjack 608S Feller Buncher

Very nice owner operated buncher. Just over 15,000 hours. Excellent running 6081T Deere Engine with great track power. Reversing fan. Electronic engine bay door with ladder. Good Undercarriage with single grouser pads. Super clean inside and out. This machine has been very well cared for. 2 speed travel works great. Serial number is WC608SX007182. 22 inch felling head in with lateral in good working condition. Heat & A/C. Joystick controls. AM/FM CD radio. Please feel free to give us a call!!! We do take trades depending on what you have and we can assist with trucking if needed. Thanks for looking!

Timberjack 608s 2005
$89,500
2005 Fabtek 546C Forwarder

2005 Fabtek 546C Forwarder

2005 Fabtek 546C, complete re-built Cat engine, new rear-end, new jib cylinder, new rotate motor on bucket, 700 rear rubber, 30.5x32 front We may take trades depending on what you have. We can help with shipping costs. Heat & A/C. Hydrostatic transmission, shifts great. New windows. New drive shaft. Recent full service of all fluids and filters. Just over 16,000 hours. Very well cared for and ready to work!!

Fabtek 546c 2005
$89,500
Tigercat 870C Feller Buncher w/ GN Roy Saw Head

Tigercat 870C Feller Buncher w/ GN Roy Saw Head

2005 Tigercat 870C Feller Buncher with a GN Roy Saw Head. This equipment has 15,000 total machine hours, 6,000 hours on Cummins rebuilt engine. Strong hydraulics and cylinders, tight boom, undercarriage is in good working order, Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Tigercat 870C 2005
$64,900
Morbark 628 Debarker

Morbark 628 Debarker

2005 Morbark 628 Debarker. This equipment has a 100 HP electric motor, cab, 25' in-feed trough, 20' out-feed trough, stands. Runs daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. ***SELLER IS OPEN TO REASONABLE OFFERS.***

Morbark 628 2005
$40,000
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2005 Ponsse Ergo Harvester with a H73E Harvesting Head. This machine has a Mercedes Benz engine, runs and starts good, hour meter reads 22,300 hours, Wabasto pre-heat system, strong hydraulics and cylinders, pumps are up to par, HN-125 crane, tight boom, squirt boom works as it should, Nokian 700/45/26 tires. Bogies are in good working order, head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2005
$85,000
Timbco 445 EXL Processor with a 22" Quadco Head

Timbco 445 EXL Processor with a 22" Quadco Head

2005 Timbco 445 EXL with a 22" Quadco Head. Feller has an 8.3 Cummins engine with approx. 3,000 hours, 98% undercarriage, new injection pump, Rexroth hydraulic pumps and valve bank just resealed. Tight machine with new glass, heat, A/C and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 445EXL 2005
$129,500
John Deere 2054 with a Limimit 2100C Delimber

John Deere 2054 with a Limimit 2100C Delimber

2005 John Deere 2054 with a Limimit 2100C Delimber. This delimber has a new John Deere engine 4,000 hours ago, strong hydraulics and cylinders. Good running machine, forestry cab & guarding, Webasto heater, fire suppression system. Double grouser pads, undercarriage is in good working order. Limimit 2100C has a straight boom, all cables and hoses are in good condition, topping saw, knives are in good shape. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 2054 2005
$Call for Price
John Deere 748GIII Skidder

John Deere 748GIII Skidder

2005 John Deere 748GIII Dual Arch Grapple Skidder. This skidder has the Direct Drive transmission, all new 30.5 x 32 tires, tight pins and bushings, strong hydraulics. 2,070 hours on engine rebuilt in 2016, 2,000 hours on new differential in 2017. Clean, well maintained, and on a regular service schedule. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment are located in Northcentral USA.

John Deere 748GIII 2005
$59,000
Tigercat 724D Wheeled Feller Buncher

Tigercat 724D Wheeled Feller Buncher

2005 Tigercat 724D Wheeled Feller Buncher. This machine has Cummins engine that has been rebuilt, strong hydraulics and cylinders, hydrostatic transmission is in good order, new drive motor. Tigercat 5702 head straight disc, grab arms are tight. Joystick controls, heat, A/C, and lights. 30.5 x 32 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Tigercat 724D 2005
$79,900
John Deere 953G Feller Buncher

John Deere 953G Feller Buncher

2005 John Deere 953G Feller Buncher. This machine has a complete engine from John Deere dealer approx. 4,000 hours, 13,278 frame hours, strong hydraulics and cylinders, undercarriage is in good order. FS 24 head, straight blade, good teeth. Heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 953G 2005
$Call for Price