Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Rotochopper MC266 Horizontal Grinder

Rotochopper MC266 Horizontal Grinder

2004 Rotochopper MC266 Horizontal Grinder. This machine has a CAT C15 engine, runs and starts good, ProHeat system, new alternator, strong hydraulic pumps. Drum was just rebuilt and balanced, knives are in good order, infeed chain is in good working condition, out-feed conveyor is in good condition, 3 remotes, all belts and hoses are in decent condition, carrier has good brakes and tires, all lights working. Has been well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Rotochopper MC266 2004
$119,500
2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 Feller Buncher

2004 570 Hydro Ax with 22" sidecut 1 owner operator 4650 original hours. Has newer carbides, new skylight and windshield, 2 new front firestone tires 28lx26. Joystick controls, heat, air, quick couplers, heat grid and 1 set babac bearpaw chains. 5.9 cummins that does not burn any oil and has no hydraulic leaks. Very tight machine that is greased daily well maintained and ready to go to work. Retired

Hydro-Ax 570 22" Sidecut 2004
$75,000
CTR 950 Skidder

CTR 950 Skidder

2004 CTR 950 Dual Arch Grapple Skidder with Winch. This skidder has a 5.9 Cummins 174 HP engine rebuilt 300 hours ago, center could use some attention, 40K winch, no grapple rotor, 1000 hours on new pump, blade cylinder rebuilt. 28Lx26 tires. Needs some work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

CTR 950 2004
$Call for Price
CTR 950 Skidder

CTR 950 Skidder

2004 CTR 950 Single Arch Grapple Skidder with Winch. Hour meter reads 4,965 hours on new 5.9 Cummins 174 HP engine, runs and starts good, strong hydraulics and transmission. 40,000 lbs. winch. 30.5 x 32 tires. New blade cylinders. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

CTR 950 2004
$Call for Price
Timbco 415EX Harvester With Rolly II Head ***SOLD***

Timbco 415EX Harvester With Rolly II Head ***SOLD***

2004 Timbco 415EX Harvester With Rolly II Head. Hour meter reads 12,400 hours, Sisu engine, runs and starts good, no blow by, new injection pump. Undercarriage is @ 80%, 24" double grouser pads, new drive motor. Strong hydraulics and cylinders, new pilot pump. Tight boom, newer rotate motor. Rolly II head 2 valve, updated measuring system and new measuring wheel, Woodland ISF computer, grab arms and rollers are in good order as well as the saw. Heat, A/C, and LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timbco 415EX 2004
$62,900
2004 JOHN DEERE 648GIII

2004 JOHN DEERE 648GIII

2004 JOHN DEERE 648GIII GRAPPLE SKIDDER 6 CYL DEERE POWESHIFT 24.5-32 RUBBER HOUR METER SHOWS 5625 BUT HOURS ARE UNKNOWN

John Deere 648GIII 2004
$64,900
2004 Serco 170 Slasher

2004 Serco 170 Slasher

2004 SERCO 170 SLASHER SELF PROPELLED 6 CYL JOHN DEERE SLASHER TABLE

Serco 170 2004
$64,900
Tigercat 822 Feller Buncher

Tigercat 822 Feller Buncher

2004 Tigercat 822 Feller Buncher with APX and a TC 5400 Head. This buncher has 8.3 Cummins Power, 8,500 hours on Engine, strong hydraulic and cylinders, newer pumps. Undercarriage was redone Summer 2018. Tight boom, head is in good working order, straight disc, good teeth. Heat, A/C, and lights. Machine is in good condition and still working. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Tigercat 822 2004
$84,900
Tigercat 724D Wheeled Feller Buncher

Tigercat 724D Wheeled Feller Buncher

2004 Tigercat 724D Wheeled Feller Buncher. Hour meter reads 5,233 hours on a Cummins 8.3 215 HP engine, runs and starts good, strong hydraulics and cylinders, tight center section, transmission is in good working order, Webasto Pre-heater for hydraulics and engine, hydraulics reversible fan, Tigercat DW5600 saw head, straight disc. Firestone Forestry Special 28L x26 16 ply tires. Heat, A/C, and halogen work lights with guards. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Tigercat 724D 2004
$79,500
Tigercat 822 Feller Buncher with a 5700 Saw Head

Tigercat 822 Feller Buncher with a 5700 Saw Head

2004 Tigercat 822 Feller Buncher with a 5700 Saw Head. This equipment has been gone through, new boom and jib, rebuilt cylinders, new set of tracks 1,500 hours ago, 1,200 hours on new injectors, turbo 700 hours ago, newer Proheat system. 5400 head is newer with new drive shaft, hydraulic pressures checked. 5700 saw head has been rebuilt with paper work and 3 sets of teeth. New spindle kit. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Tigercat 822 2004
$Call for Price
John Deere 2054 Harvester

John Deere 2054 Harvester

2004 John Deere 2054 Harvester with a Waratah 620B Head. This equipment has 14,500 frame hours. New motor has less than a 1,000 hours. Close to new approx. 95% rails, pads, front idlers, & sprockets. New hydraulic pumps 2,500 hours ago. New final drives 2,500 hours ago, rebuilt center joint 3,500 hours ago. All hydraulic hose and fittings are good. All boom cylinders are good. All controls work good, travel is good. The Waratah 620B head has same hours as machine, cylinders are all good, hydraulic hoses are all good, coupler fitting to boom at top of head is good, head rotate is good. Feed rollers are good, read outs good, 2 saws, Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

John Deere 2054 2004
$79,500
Timberjack 840 Feller Buncher

Timberjack 840 Feller Buncher

2004 Timberjack 840 Feller Buncher. This machine has newer hydraulic pumps, new saw pump, new saw disc, John Deere engine, runs and starts good, strong hydraulics and cylinders, FD 22 Head, joystick controls. Tires are @ 50%-80%, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Timberjack 840 2004
$51,500