Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Caribou Forwarder

Ponsse Caribou Forwarder

2003 Ponsse Caribou Forwarder. This equipment has a Mercedes Benz Engine, runs and starts good, strong hydraulics and cylinders, tight extended boom and grapple, bogies are in good working order, Pro Heat is not working, 500 tires with chains. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Caribou 2003
$95,000

John Deere 648GIII Dual Arch Grapple Skidder

2003 John Deere 648GIII Dual Arch Grapple Skidder. This skidder runs and starts good, strong hydraulics and cylinders. Direct drive transmission in good working order, tight center section, decent pins and bushings on the arch, grapple pins have a little play. Axles and cradles are in good working order, tires are @ 75%, heat. A/C needs attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

John Deere 648GIII 2003
$49,500
2003 -822 Tigercat Feller Buncher- other units avail.

2003 -822 Tigercat Feller Buncher- other units avail.

REDUCED to $49,500 OBO -2003 - 822 Tigercat Feller buncher 4800 engine hrs- needs under carriage and a couple other things done. Will be SOLD AS IS! We have (2) 2004 models, (1) 2009 model and (1) 2014 model - all have higher hours BUT $80K-$100K work has been done to machines in the last couple of years. 40% undercarriage average and 110 degree tilt heads. These machines are READY TO WORK. Prices range from $55K to $120K.

Tigercat 822 2003
$49,500
Logging Operation: 630B Skidder, 643K Cutter, & 559B Loader

Logging Operation: 630B Skidder, 643K Cutter, & 559B Loader

Logging Operation FOR SALE: *2003 Tigercat 630B Dual Arch Grapple Skidder. This equipment has a newer Cummins engine runs and starts good, hour meter reads 10,000 hours. 2 new pumps, strong hydraulics and cylinders, decent pins and bushing, Good 50" tires. *2011 John Deere 643K Feller Buncher. Hour meter reads 7,900 hours, runs and starts good, strong hydraulics and cylinders, joystick controls, FD head. 28L x 26 tires, Heat, A/C, and lights. 2013 CAT 559B Loader. Owner stated this machine runs and starts good, hour meter reads 13,396 hours, strong hydraulics and cylinders, carrier is in good working order. Tight boom, 360 grapple. Heat, A/C, and lights. CTR Ground Saw and Delimber. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

Tigercat 630B 2003
$110,000
John Deere 653G Feller Buncher

John Deere 653G Feller Buncher

2003 John Deere 653G Feller Buncher. This buncher has a good running John Deere engine, strong hydraulics and drive system. good cylinders, hour meter reads 7,897 hours, tight pins and bushings on the boom and head, 36" pads. Head is a Waratah FS22 straight disc, new teeth, grab arms are in good condition. Heat, new A/C compressor and belt, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 653G 2003
$57,900
John Deere 653G Feller Buncher ***SOLD***

John Deere 653G Feller Buncher ***SOLD***

2003 John Deere 653G Feller Buncher. This buncher has a good running John Deere engine, strong hydraulics and drive system. good cylinders, hour meter reads 7,857 hours, tight pins and bushings on the boom and head, 36" pads. Head is a Waratah FS20 straight disc, grab arms are in good condition. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 653G 2003
$52,500
Timberjack 1270D Harvester ***SOLD***

Timberjack 1270D Harvester ***SOLD***

2003 Timberjack 1270D Harvester with a LogMax 6000B Head. This equipment has a John Deere 6081 engine, runs and starts good, Espar pre-heater, computer was replaced a year ago, strong hydraulics and cylinders, new crane pump in 2014, newer center section, newer crane bearing, new fuel tank, new A/C pump. Leveling cab, heat, A/C, lights, and radio, 6,000 hours on the LogMax 6000 head, feed rollers and grab arms are in good working condition. 700 tires with Eco tracks, has engine guards. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 1270D 2003
$79,500
Rottne 5005 Processor with Maskiner SP 561 Processor Head

Rottne 5005 Processor with Maskiner SP 561 Processor Head

2003 Rottne 5005 Processor with 2011 Maskiner SP 561 Processor Head. This equipment has a John Deere 6068 engine, runs and starts good, Webasto pre heater, 17,000 hours on Rottne. Each tire has an independent leveling system. 2011 Maskiner SP 561 head, Dasa 4 measuring system, super cut 100 cut system. Solid boom with spare New Pro link, good tires. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Rottne 5005 2003
$78,500
CAT 320C Excavator with a Denharco 4150 Delimber

CAT 320C Excavator with a Denharco 4150 Delimber

2003 CAT 320C Excavator with a Denharco 4150 Delimber with Butt Saw. This equipment runs and starts good, strong hydraulics, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

CAT 320C 2003
$56,500
 Timberjack 1270D Harvester

Timberjack 1270D Harvester

2003 Timberjack 1270D Harvester. This machine has 12,800 frame hours, rebuilt 6081 Deere engine around 1,800 hours ago. Engine starts and runs good, Espar preheating system. Updated Timbermatic 300 computer system. 758 HD head in good working condition. Machine has an updated fuel tank, main crane pin is new, 1 new feed motor and the others have been changed out in the last 3,000-4000 hours. New flex plate between pump and motor, New link from boom to head 800 hours ago. 600 Rubber @ 60%. Heated leveling seat. Heat, AC, radio, and CD player. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 1270D 2003
$95,000
Fabtek 153 Processor with a Fabtek 4 Roller Head ***SOLD***

Fabtek 153 Processor with a Fabtek 4 Roller Head ***SOLD***

2003 Fabtek 153 Processor with a Fabtek 4 Roller Head. This machine has a John Deere 6068 6.8 liter engine, runs and starts good, 9,475 hours, strong hydraulics and cylinders, newer pump, head has been reworked, new pins and bushings, measuring system and computer are in good working order, feed rollers and chains are in good condition. One new final drive motor, undercarriage is @ 90%, double grouser pads, Pro Heat system. New radiator, new batteries, heat LED lights, A/C was just recharged. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Fabtek 153 2003
$77,950
Prentice 620FB Feller Buncher

Prentice 620FB Feller Buncher

2003 Prentice 620FB Feller Buncher. This machine has a Cummins 6BT engine runs and starts good, strong hydraulics, all pumps have been gone through, tight boom. Strong cylinders, 22" Koehring 40 degree head, grab arm has a bit of play not bad, disc has a crack, leveling system is in good working order, undercarriage is @ 75%, new rollers, 24" SG pads, heat, and lights. A/C needs to be charged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 620FB 2003
$62,500