Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 1270B Harvester with a 762C Head

Timberjack 1270B Harvester with a 762C Head

1999 Timberjack 1270B Harvester with a 762C Head. This machine has a Navstar DT 466 engine that has been gone through, runs and starts good. Strong hydraulics, pump has been replaced. Boom and steer cylinders are in working condition. Head, CPU, and measuring system are in working order. New windshield, 710 tires, bogies and bearings are in good condition, tight center, pins and bushings have normal wear, engine pre-heater, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Timberjack 1270B 1999
$35,000
Timberjack 1270 Harvester with a 762C Head

Timberjack 1270 Harvester with a 762C Head

1999 Timberjack 1270 Harvester with a 762C Head. This equipment has a International DT 466 engine, runs and starts good, pre heat system, strong hydraulics and cylinders, pump and hydrostats are in good working order, joystick controls, one joystick was just rebuilt, tight boom, boom base has new bearings, center section has a little play not bad. 762C Head and measuring system is in good condition, 26" bar, new end coder and diameter censor, also has 3 sets of feed rollers, peeling rollers, spiked rollers and rubber rollers. Good front glass 1 year old, 600 tires with tracks and chains, Heat, A/C, and lights all work. Many extra parts as well. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 1270 1999
$39,500
Valmet 646 Forwarder

Valmet 646 Forwarder

1999 Valmet 646 12 Ton 6 Wheel Double Bunk Forwarder. This machine has a newer Cummings 4BT engine, runs & starts good. Joystick control, heat, A/C , and lights. SuperGrip grapple, Extenda boom (squirt), recently replaced hydraulics, cylinders, and pump. Clark Powershift 3 speed transmission in good working order, bogies and differential lock are in good working condition. Front tires are 23’s @ 75%, back tires are 600’s @ 75%, 3 sets of chains included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 646 1999
$39,900
Valmet 644 Forwarder ***SOLD***

Valmet 644 Forwarder ***SOLD***

1999 Valmet 644 Single Bunk 8 Ton Forwarder. This forwarder has Cummins engine, runs and starts good, strong hydraulics and cylinders. Joysticks controls, tight boom and grapple, does not have squirt boom. Powershift transmission completely gone through a year ago, Espar preheat. A/C, heat, and lights. 23.1 x 26 tires @ 75% with or without chains. Extra parts: hoses, seal kits, manuals, & transmission pump. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Valmet 644 1999
$56,000
John Deere 648GII Grapple Skidder

John Deere 648GII Grapple Skidder

1999 John Deere 648GII Grapple Skidder with Winch. Hour meter reads 5,110 hours, runs and starts good, strong Power Shift transmission, tight center pins, little play on blade pins, extended blade, 30.5x 32 tires @ 75% - 1 has a weather crack. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648GII 1999
$31,500
Timbco T425C Feller Buncher

Timbco T425C Feller Buncher

1999 Timbco T425C Feller Buncher with a 2005 Quadco 360 degree 22" Saw Head with 4,000 estimated hours, new engine with 1,000 hours ago, Implement, charge and saw pumps with 1,000 hours, undercarriage is @ 80%. New front idlers, 50 hours on bottom rollers, new sprockets, 28" double grouser pads. Solid boom. Espar heater with Arctic Fox Diesel Fired Coolant Pre-Heater. Leveling cylinders have been recently repacked. Also has a 40 degree head In good working order. Machine can be sold with either Head. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco T425C 1999
$104,900
Morbark 23 WCL Whole Tree Chipper

Morbark 23 WCL Whole Tree Chipper

1999 Morbark 23 WCL Whole Tree Chipper. This equipment has a CAT 3412 engine, 7,159 hours, runs and starts good, Morlift 500 loader with Cab, strong hydraulics and cylinders, 3 knives, 3/4" chips. Joystick control. Good brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933., Machine is located in Northcentral USA. ***EQUIPMENT MUST MOVE, OPEN TO OFFERS***

Morbark 23 WCL 1999
$Call for Price
Rottne Rapid SMV 12 Ton 6 Wheel Forwarder ***SOLD***

Rottne Rapid SMV 12 Ton 6 Wheel Forwarder ***SOLD***

1999 Rottne Rapid SMV 12 Ton 6 Wheel Forwarder. This machine has a good running Iveco engine, newer injectors, water pump, and rebuilt injection pump within last 800 hours, 70% ice chains on the front, tracks on the rear that had new grousers welded on last winter. 3 of the 4 bogie tires are like new. RG83 boom that is tight with extended boom. 18,000 hours. Steering pins have some play, has a couple leaks but is overall a pretty dry machine for its age. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Rottne Rapid SMV 1999
$57,500
John Deere 540GII Skidder ***SOLD***

John Deere 540GII Skidder ***SOLD***

1999 John Deere 540GII Cable Skidder. This machine runs and starts good, hour meter reads 13,519 hours, been well maintained, 6 cyl. John Deere engine, Power Shift transmission, tight center section, strong steer and blade cylinders, winch is in good working order, 23.1x26 tires @ 75% with chains, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

John Deere 540GII 1999
$52,500
1999 Fabtek 546C Forwarder

1999 Fabtek 546C Forwarder

1999 Fabtek 546C with 19,197 hours at time of listing. Great running machine. Rear tires are near new. Comes with a set of front chains. Has a Supergrip bucket. Many hoses have been recently replaced. Oil changes have been done on a routine basis. Has newer LED lights all around the cab.

Fabtek 546C 1999
$94,900
Timberjack 1270B Harvester with a 762C Head ***SOLD***

Timberjack 1270B Harvester with a 762C Head ***SOLD***

1999 Timberjack 1270B Harvester with a 762C Head. Per owner, this machine has a Navstar DT 466 engine that has been gone through, runs and starts good. Strong hydraulics, pump has been replaced. Boom and steer cylinders are in working condition. Head, CPU, and measuring system are in working order. New windshield. 710 tires, bogies and bearings are in good condition, tight center, pins and bushings have normal wear, engine pre-heater, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 1270B 1999
$32,500
Timberjack 1270B Processor with 762C Head

Timberjack 1270B Processor with 762C Head

1999 Timberjack 1270B Processor. This machine has a DT 466 Engine, 762C Head with newer saw assembly & bearing. 700 tires with tracks tires approximately 50-60%, newer main pressure and pilot valves, tight center, pins and bushings have normal wear, pre-heat, good solid machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1270B 1999
$43,900