Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Prentice F90 Log Loader

Prentice F90 Log Loader

1997 Prentice F90 Single Pump Log Loader. This loader has a newer swing motor, tight swing bearing, joystick controls, 22' boom, Serco grapple with butt plate, has a little play in pins and bushings, will need bushings soon. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Prentice F90 1997
$Call for Price
Tree Farmer C6F Forwarder ***SOLD***

Tree Farmer C6F Forwarder ***SOLD***

1997 Tree Farmer C6F 6 Wheel DB Forwarder. This equipment has a Cummins reman 5.9 BT engine, runs and starts good, strong Power Shift transmission, strong hydraulics and cylinders. New bogie bearings, 710 tires, tight center section, boom and 360 grapple are in working order, heat and lights. Diamond chains on the front. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Tree Farmer C6F 1997
$30,900
Timberjack 460C Skidder

Timberjack 460C Skidder

1997 Timberjack 460C Skidder. This machine has 4,000 hours on 5.9 Cummins Reman engine, runs and starts good. Cradle pins were done when engine was. 12,900 frame hours on meter, only used 500-700 hours a year in winter. New Chains, 30.5 x 32 rubber, new muffler. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 460C 1997
$28,500
John Deere 548G Skidder

John Deere 548G Skidder

1997-98 John Deere 548G Grapple Skidder with Winch. This skidder has a John Deere 6 cyl. engine has been rebuilt in the passed, runs and starts good, strong Power-Shft transmission, differential lock is in good working condition, steer cylinders have been recently repacked, tight center section, arch could use some pins and bushings, grapple is in good order, strong winch. Heat, LED light, 28Lx 26 tires @ 40% with 2 sets of Double Diamond chains. Contact Erik @ Red Pine Equipment 218-720-0933. Skidder is located in Northeast USA.

John Deere 548G 1997
$35,000
Chambers Delimbinator Flail Delimber ***SOLD***

Chambers Delimbinator Flail Delimber ***SOLD***

1997 Chambers Delimbinator Flail Delimber. This equipment has 800 hours on a complete reconditioning. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Chambers Delimbinator 1997
$38,500
45' 4 Bunk Tri Axle Centermount Trailer ***SOLD***

45' 4 Bunk Tri Axle Centermount Trailer ***SOLD***

1997 45' 4 Bunk Tri Axle Centermount Trailer with Rotobec BWS 80 Elite XT Log Loader. New air ride axles 1 year ago, no cracks or welds, plate and pins are good, loader is extremely tight and dry. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Rotobec 80 Elite XT 1997
$30,900
CAT 525 Skidder ***SOLD***

CAT 525 Skidder ***SOLD***

1997 CAT 525 Grapple Skidder with Winch. Hour meter reads 7,300 hours, runs and starts good, strong hydraulics and transmission, new pins and bushings, steer cylinders have been gone through, flotation tires @ 75% or better, winch is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

CAT 525 1997
$35,500
Timberking 923 with a 2000B Limmit Delimber

Timberking 923 with a 2000B Limmit Delimber

1997 Timberking 923 with a 2000B Limmit Delimber. This equipment runs and starts good, CAT 3306 engine, strong hydraulics and cylinders, drive motors and swing gear are in good order, 22" pads, undercarriage is @ 50%, straight boom, cables and pulleys are in good condition, Risley topping saw, sharp knives. Carrier has been reworked. Heat, A/C, and lights. Has been repainted. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Timberking 923 1997
$37,500
John Deere 648G Skidder ***SOLD***

John Deere 648G Skidder ***SOLD***

1997 John Deere 648G Dual Arch Grapple Skidder with Winch. This skidder runs and starts good, newer engine 6,000 hours ago, strong hydraulics and transmission, tight center section, cylinders are all in working order, has a few seeps, strong brakes, winch is in good working condition, 5/8 mainline, heat, and lights. A/C is not working, has block heater. 24.5x32 tires @ 20%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 648G 1997
$28,000
Timberjack 608 Processor with a Logmax 650 Head *SOLD*

Timberjack 608 Processor with a Logmax 650 Head *SOLD*

1997 Timberjack 608 Processor with a Logmax 650 Head. This equipment has a newer Cummins 5.9 engine with ~4,000 hours, runs and starts good, strong hydraulics and cylinders, undercarriage is @ 60%, 24" pads, Logmax head is in good working order, has a 392 Logmate computer, strong pumps, pins and bushings are in good working order, tight boom and head, heat, A/C, and block heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 608 1997
$50,000
Timberjack 610 Double Bunk Forwarder

Timberjack 610 Double Bunk Forwarder

1997 Timberjack 610 Double Bunk Forwarder. This machine has a Cummins, 4BT engine, runs and starts good, 11,000 hours, rebuilt transmission and transfer case, clutch was redone, boom was recently gone through, new rotator head - Pro Link snubber, strong hydraulics - 2 new pumps, new brakes, 2 new 28Lx26 tires, A set of Bear Claw chains 70-80%, spare rim, heat, A/C, and LED lights. Contact Aaron Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 610 1997
$56,500
Morbark Model 23 NCL Chipper

Morbark Model 23 NCL Chipper

1997 Morbark Model 23 NCL Chipper. This machine has 4,200 hours, CAT 550 engine, runs and starts good. Machine was rebuilt in contractors shop 800 hours ago including the following items: new wear plates, belly pans and head liners, new clutch, new in-feed rollers, wireless remote. Chute is in good condition. Dirt separator, this chipper is in excellent shape for the age, produces a very consistent chip. Set up for 7/8" chip currently. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark Model 23 1997
$94,900