Photo |
Title
|
Make | Model | Year | Price |
Clark 665D Cable Skidder1988 Clark 665D Cable Skidder. Hour meter reads 4,300 hours, but it hasn't worked in two years. 353T Detroit starts and runs good. 18.4x34 tires are in good condition, estimated at 70%. Includes a set of ring chains that are like new. Newer winch cable. Has a little play in the center pins. Edge on blade could be replaced. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Clark | 665D | 1988 |
$24,000
|
|
Clark Ranger F666 Skidder1988 Clark Ranger F666 Grapple Skidder. Cummins 5.9 engine, Clark 3 speed transmission. Front tires estimated at 95% tread, rear tires are estimated at 25%. Driveshaft for winch is new & has a new 100' 5/8" mainline and 1/2" chokers. Center and arch pins are tight. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Clark | Ranger F666 | 1988 |
$28,500
|
|
1988 IRON MULE 55001988 IRON MULE 5500 4 CYL FORD STANDARD SHIFT LEVER CONTROLS 23.1-26 RUBBER NEW ON FRONT 90@ ON REAR |
Iron Mule | 5500 | 1988 |
$29,500
|
|
Trelan 23 Whole Tree Chipper1988 Trelan 23 Whole Tree Chipper. CAT 500hp engine. Feed drums are in good condition. 3 knives. New clutch and belts. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Trelan | 23 | 1988 |
$Call for Price
|
|
Valmet 503 Harvester with a 16" Head ***SOLD***1989 Valmet 503 Harvester with a 16" Head. hour meter reads 6,800 hours, 4 cylinder John Deere engine, runs and starts, will need some injectors soon, new right final drive, new joysticks, quick couplers. 23.1 x 26 tires set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Valmet | 503 | 1989 |
$Call for Price
|
|
1989 Timberjack 380B Skidder1989 TIMBERJACK 380B GRAPPLE SKIDDER 6 CYL CUMMINS POWERSHIFT 24.5-32 RUBBER NEW TURBO ON ENGINE NEW TRANSMISSION FROM VALLEY |
Timberjack | 380B | 1989 |
$34,900
|
|
Komatsu PC200 LC-5 with a Denis D-3200-T Delimber1989 Komatsu PC200 LC-5 with a Denis D-3200-T Delimber. This equipment has a Komatsu engine, runs and starts good, Hour meter reads 10,594 hours, strong hydraulics and pumps. Straight boom and good cables, knives are in good working order, undercarriage is in good condition, 30" triple grouser pads. Chains and sprockets are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC200 LC-5 | 1989 |
$22,500
|
|
John Deere 648D Grapple Skidder1989 John Deere 648D Grapple Skidder. This equipment has a newer engine and the hydraulic pump was rebuilt in 2005. Cylinders in good shape. Tight center section. Has arch and grapple set up for it but is currently set up with a 1997 Delta TTS Power Disc Trencher. Trencher is not included in the quoted sale price but can be sold with the machine, arch and grapple for $79,900. 30.5 x 32 tires @ 75% with a set of chains. Cab has heat, A/C, and lights. Stacking blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 648D | 1989 |
$27,500
|
|
Hydro-Ax 311C w/Bunching 16" Shear and a 8' Flail Delimber1989 Hydro-Ax 311C Bunching 16" Shear and a 8' Flail Delimber. This equipment has a John Deere 4 cyl. engine, runs and starts good, newer hydraulic pump, strong hydrostatic transmission, tight center section, newer blades on shear, shear cylinders were recently repacked, 28Lx26 Firestone tires @ 75% with a set of chains, decent glass, newer hoses, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hydro-Ax | 311C | 1989 |
$18,900
|
|
Bobcat 1080C Feller Buncher with a 16" Bar Saw1989 Bobcat 1080C Feller Buncher with a 16" Bar Saw. Hour meter reads 8,840 hours, 4BT Cummings, new auxiliary pump, new heater, extra bars and chains, new bearings and shaft that run the chain, new hydraulic fluid and filters, good tires and tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bobcat | 1080C | 1989 |
$19,500
|
|
Iron Mule 5510 Forwarder1989 Iron Mule 5510 Forwarder. Hours are unknown, meter reads 1,747 hours. Ford 4cyl engine. 23.1x26 tires on the front are new, rears are estimated at 50%. Includes an extra tire without rim & chains. Minor leak on boom cylinder. Center and Gafner hydra-loader are tight. Can include extra tires for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Iron Mule | 5510 | 1989 |
$22,000
|
|
Prentice 210D Loader on Mack Truck1989 Prentice 210D Loader on 1989 Mack Truck. 183,397 miles on the truck, 12,573 hours on the loader. John Deere 6059T engine, & Eaton Fuller 10 speed transmission Bypass grapple with joystick controls. Oil pan is dry, cylinders overall pretty dry, oil lines are wet. 425/65 r22.5X8.25 Bridgestone tires. Tires are at about 80%. Red Dot aftermarket heater. Truck will be removed soon and loader will be placed on carrier if needed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Prentice | 210D | 1989 |
$19,000
|