Sort By:   GridGallery
Photo Title
Make Model Year Price
CAT 584HD 8 Wheeled Forwarder

CAT 584HD 8 Wheeled Forwarder

2016 CAT 584HD 8 Wheeled Forwarder. Hour meter reads 6,000 hours. CAT 280 HP Tier III engine, with no DEF. 750 tires are estimated at 55%, with two sets of tracks. HD boom, squirt extension measures out to 28'. Blade works well. Cab is in good condition, seat has no tears, has always had a seat cover. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

CAT 584HD 2016
$167,500
Rotochopper B66T Horizontal Grinder ***ON HOLD***

Rotochopper B66T Horizontal Grinder ***ON HOLD***

2016 Rotochopper B66T Horizontal Grinder on Tracks with Tri-Axle Carrier. This equipment has a 950 HP CAT C27 Tier 2, runs and starts good, very powerful, strong hydraulics, grinder is in good working order, Colorizer with complete skid mount. Approx. 1,900 hours, remote control, undercarriage is @ 90%, Tri-axle highway transport dolly. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD***

Rotochopper B66T 2016
$Call for Price
CAT 535D Skidder

CAT 535D Skidder

2016 CAT 535D Dual Arch Skidder. Hour meter reads 7,100 hours. CAT C7.1 225 HP engine, starts and runs good. New transmission with 0 hours. Strong hydraulics, grapple opens to 16-1/2' , 73/44-32. Tires are in good condition with chains all around, dualing rings, clean cab with A/C and heat, very nice skidder. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 535D 2016
$134,500
Peterson 4800F Flail Debarker

Peterson 4800F Flail Debarker

2016 Peterson 4800F Flail Debarker. Hour meter reads 9,554 hours. Oil changes every 250 hours. Both gear boxes on the flails were redone at 7,000 hours. New injectors, Heui pump, & transfer pump 500 hours. New injectors & wires. New flail drum and bearings on the top. Both flail pumps and motor is strong. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Peterson Pacific 4800F 2016
$325,000
John Deere 1010E 6W Forwarder

John Deere 1010E 6W Forwarder

2016 John Deere 1010E 6 Wheeled Forwarder. Hour meter reads 7,266 hours. John Deere 4045 engine & hydrostatic transmission. 710/55R34 tires are estimated at 85%. 710/45-24.5 tires are estimated at 75%. Fixed cab, CF572 crane with squirt boom & SuperGrip 360H bucket. ProHeat preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. REDUCED FROM $242,500.00.

John Deere 1010E 2016
$235,000
CAT 501HD Processor with PF48 4 Roller Head ***SOLD***

CAT 501HD Processor with PF48 4 Roller Head ***SOLD***

2016 CAT 501HD with PF48 4 Roller Head. Hour meter reads 5,106 hours, runs and starts good, strong hydraulics and cylinders. Includes Jet Fit Bar System. ProHeat preheater, fire suppression, 24" double grouser pads. Undercarriage is @ 85% and in very good shape. Fabtek head and measuring system are all in good working order. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

CAT 501 HD 2016
$Call for Price
Komatsu XT430-L Feller Buncher w/ Quadco 22B 360° Head

Komatsu XT430-L Feller Buncher w/ Quadco 22B 360° Head

2016 Komatsu XT430-L Feller Buncher with Quadco 22B 360° Head. Hour meter reads 6,300 hours. 24" double grouser pads, undercarriage is estimated at 60%. Leveling system is in good working order, preheat sytem. Quadco 22B 360° felling head is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu XT430-L 2016
$272,500
Ponsse Wisent 8W Forwarder ***SOLD***

Ponsse Wisent 8W Forwarder ***SOLD***

2016 Ponsse Wisent 8W Double Bunk Forwarder. Hour meter reads 6,167 hours. Mercedes 173hp engine starts and runs good. 710x26.5 tires are estimated at 85%. K70 crane with a tight extendaboom & SuperGrip grapple. Strong hydraulics and hydrostatic-mechanical drive system. Front Blade, Webasto preheat system, 710 tires @ 85% with a set of Eco tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Ponsse Wisent 2016
$Call for Price
Ponsse Wisent 8 Wheeled Forwarder

Ponsse Wisent 8 Wheeled Forwarder

2016 Ponsse Wisent 8 Wheeled Forwarder. Hour meter reads 7,500 hours. Mercedes engine starts and runs good. 710x26.5 tires are estimated at 65%. K70 crane is tight, squirt boom & SuperGrip grapple. Strong hydraulics and hydrostatic-mechanical drive system. Front Blade, Webasto preheat system. Heat, A/C, LED lights, & radio. Available September. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Ponsse Wisent 2016
$225,000
Tigercat 610E Skidder

Tigercat 610E Skidder

2016 Tigercat 610E Grapple Skidder with Winch. Hour meter reads 8,600 hours. Engine starts and runs good. 30.5x32 tires are estimated at 50%. Strong blade & winch. New hydrostats, receipts can be provided upon request. Tight center. Heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Tigercat 610E 2016
$105,000
TimberPro TF830C Combo with SP761 Harvesting Head

TimberPro TF830C Combo with SP761 Harvesting Head

2016 TimberPro TF830C Combo with SP761 Harvesting Head. Hour meter reads 5,300 hours. Cummins QSC 8.3L engine. 710/45-26.5 tires are estimated at 60%. Squirt boom. 2015 SP761 harvesting head with good feed wheels, has topping saw. Supergrip 360S grapple. Espar preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberpro TF830C 2016
$445,000
CSI 4400 Hydra Saw

CSI 4400 Hydra Saw

2016 CSI 4400 Hydra Saw with Base. In good working order. No table. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

CSI 4400 2016
$7,500