Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 120 with Fabtek 4 Roller Head

John Deere 120 with Fabtek 4 Roller Head

2000 John Deere 120 with Fabtek 4 Roller Head. Hour meter reads 22,380 hours. John Deere 4045T engine, 1,200 hours on new engine, turbo, water pump, oil cooler, belts, & pullies. 24" triple grouser pads, undercarriage is estimated at 60%. Main pump and hoses were done 600 hours ago. Most cylinders have been just repacked. New wiring harnesses and 2 new encoders on head. New computer components. New leveling motors on the head, 3rd wheel measuring system is in good working order. Proheat preheat system for engine was just gone through, cab, & hydraulics. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. 2 new encoders on the head. 

John Deere 120 2000
$52,500
Kobelco SK200 Mark IV with Waratah 230HTH Processing Head

Kobelco SK200 Mark IV with Waratah 230HTH Processing Head

2000 Kobelco SK200 Mark IV with Waratah 230HTH Processing Head. Hours are unknown. Mitsubishi engine. 24" triple grouser pads, undercarriage is estimated at 40%. Waratah 230HTH processing head is in good working order. Heat, A/C, lights, forestry package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Kobelco SK200 Mark IV 2000
$34,500
Timberjack 608L Feller Buncher with Koehring FG 22" Head

Timberjack 608L Feller Buncher with Koehring FG 22" Head

2000 Timberjack 608L Feller Buncher with Koehring FG 22" Head. Hour meter reads 2,815 hours, actual hours are closer to 18,000. Cummins 8.3L engine is newer with 8,500 hours. 24" single grouser pads, undercarriage is estimated at 70%. 22" hot saw with 40° tilt, good teeth. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Timberjack 608L 2000
$50,000
John Deere 748GIII Skidder

John Deere 748GIII Skidder

2000 John Deere 748GIII Grapple Skidder with Winch. Hour meter reads 19,000 hours. John Deere 6081H engine, power-shift transmission. 30.5x32 tires are estimated at 80%.Fresh service & paint. Has been used to pull logs across a field. Winch works well, grapple is tight, blade in good condition. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GIII 2000
$50,000
Hood S-182 Self Propelled Loader

Hood S-182 Self Propelled Loader

2000 Hood S-182 Self Propelled. Hour meter reads 1,956 hours, hours are estimated to be closer to 12,500. Daewoo 6 cyl. engine. Boom and 360 grapple have tight pins and bushings. Live heel. Lever controls, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Hood S-182 2000
$40,000
Valmet 860 Double Bunk 6 Wheel Forwarder

Valmet 860 Double Bunk 6 Wheel Forwarder

2001 Valmet 860 Double Bunk 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders, lift cylinder and bucket cylinder have been rebuilt. Cranab 850XL Crane, SureGip grapple, small leak on jib cylinder, few minor leaks on machine. Runs well, has a new computer. Has a mechanical throttle instead of electrical. Front tires are @ 70%, rear tires are @ 45%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 860 2001
$46,500
Rottne Rapid SMV Forwarder

Rottne Rapid SMV Forwarder

2001 Rottne Rapid SMV Forwarder. This machine has a newer John Deere 6068T engine with 2,000 hours, runs and starts good, strong hydraulics, newer drive pump, tight center section has been reinforced, boom is solid. New swing bearing in pedestal, grapple has a little play. One bogie has been replaced, 710 tires @ 50%, set of tracks, heat, radio and lights. A/C needs charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Rottne Rapid 2001
$72,500
John Deere 653G Feller Buncher

John Deere 653G Feller Buncher

2001 John Deere 653G Feller Buncher. Hour meter reads 8,605 hours. Reman John Deere 6068T engine with 2,000 hours. 24" double grouser pads, undercarriage is estimated at 70%, will need two bottom rollers. Resealed the rotary manifold in 2022. Waratah 20" felling head. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 653G 2001
$55,000
CAT 515 Skidder

CAT 515 Skidder

2001 CAT 515 Single Arch Grapple Skidder with Winch. Hour meter reads 13,850 hours. CAT 3304 engine starts and runs good. 28Lx26 tires, rears estimated at 70%, fronts at 45%. Chains are in good condition. Single arch, with bunching grapple. New rotator. All cylinders were rebuilt last February. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

CAT 515 2001
$55,000
Serco 170A Loader with 60" Slasher

Serco 170A Loader with 60" Slasher

2001 Serco 170A Loader with 60" Slasher. Hours meter reads 14,291 hours. John Deere engine. Boom is tight. 60" slasher included, blade and teeth are in good condition. Tires on the trailer are in good condition. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Serco 170A 2001
$39,500
Fabtek 153 Harvester

Fabtek 153 Harvester

2001 Fabtek 153 Harvester has a JD reman 6068 power unit that is in good working order. Starts and runs good. Just went through undercarriage and it's in excellent condition. All 4 Rotate motors just resealed, main pump is new, head tilt cylinder just resealed, and both valve banks just resealed. Independent measuring wheel. New glass. Heat, AC (just redone). Head is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek 153 2001
$79,500
CAT 311 Harvester with a Fabtek 4 Roller Head

CAT 311 Harvester with a Fabtek 4 Roller Head

2001 CAT 311 Harvester with a Fabtek 4 Roller Head. This machine has a new CAT engine, runs and starts good, strong hydraulics and cylinders, newer undercarriage with 2,500 hours, 22" pads, tight boom. Fabtek 4 roller head has new spikes on rollers, new chains, grab arms and hoses are in good working order, Upton computer, 33" Jet fit bar. Heat, A/C, and lights, air ride seat, good glass, quick couplers. Forestry Package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 311 2001
$58,900