Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 843G Feller Buncher

John Deere 843G Feller Buncher

1998 John Deere 843G Feller Buncher. Less than 500 hours on rebuilt engine. 24.5-32 tires are estimated at 40, includes chains that are estimated at 40%. Fresh service, new hoses, & new teeth on the head. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 843G 1998
$29,000
Timberjack 608 Feller Buncher with 22" Felling Head

Timberjack 608 Feller Buncher with 22" Felling Head

1998 Timberjack 608 Feller Buncher with 22" Felling Head. Hours are unknown. Cummins engine starts and runs good. 24" single grouser pads, undercarriage estimated at 50%. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Timberjack 608 1998
$25,000
Morbark 30/36 Whole Tree Chipper

Morbark 30/36 Whole Tree Chipper

1998 Morbark 30/36 Whole Tree Chipper with Cab & Loader. Meter reads 1,200 but is incorrect. 425hp engine. Needs a new clutch or can be replaced before sale for an additional cost. New infeed chain, tires are good, wireless remote included. Owner states drum is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Morbark 30/36 1998
$56,500
Komatsu PC200 LC-6 with a ProPac 453 Delimber

Komatsu PC200 LC-6 with a ProPac 453 Delimber

1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200 LC-6 1999
$45,900
Peterson 4400 Wood Hog Grinder ***SOLD***

Peterson 4400 Wood Hog Grinder ***SOLD***

1999 Peterson 4400 Wood Hog Grinder. Owner stated that this unit has 4,000 hours, CAT V12 engine, runs and starts good, strong hydraulics, new clutch and bearings. Owner said that this machine has a good conveyor, grinder in good working condition, carrier has good brakes and tires. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***SOLD***

Peterson 4400 1999
$Call for Price
Hydro Ax 611 Feller Buncher

Hydro Ax 611 Feller Buncher

1999 Hydro Ax 611 Feller Buncher. Hour meter reads 6,346 hours. Cummins 6BT engine. 28Lx26 tires are estimated at 85%, new sets of ring chains and double diamond studded ice chains are included. Also includes a rake & bucket. Side post felling head. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Hydro-Ax 611 1999
$Call for Price
1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker, Denharco 3500 Chain drives, Butt saw, Forestry Cab, Heavy Under pans, Auxiliary fuel tank, Hd side panels, Cat walks, 5.9 cummins...ready to work!!!!!

Hyundai 210-lc-3 H/W 1999
$Call for Price
Hyundai 130 Processor with LogMax 750 Head

Hyundai 130 Processor with LogMax 750 Head

1999 Hyundai 130 Processor with a 2002 LogMax 750 Head. This equipment has a rebuilt head in 2015, brand new Cummins engine, runs and starts good, one year warranty on engine, 28" bar & chain, 26" cut, same as a 7000 LogMax, extra computer & feed rollers, undercarriage is @ 60%, strong hydraulics, tight boom, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hyundai 130 1999
$53,500
Valmet 840 6 Wheeled Forwarder

Valmet 840 6 Wheeled Forwarder

1999 Valmet 840 6 Wheeled Forwarder. Hour meter reads ~13,000 hours. This machine has a Sisu engine, extenda-boom, tracks and chains, good reliable forwarder, working daily. Major work done includes, valve bank re-seal, rear differential re-seal and brakes, new center oscillation bearings, main boom line bored, new pins and bushings, extenda-boom wear pads, radiator removed and chemical washed, starter and alternator, new A/C pump and expansion valve, new front tire, the rest are 60% or so, new water pump, grapple pins and bushings, new tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 840 1999
$38,000
Prentice 410E Loader with Ground Saw & Delimber  *ON HOLD*

Prentice 410E Loader with Ground Saw & Delimber *ON HOLD*

1999 Prentice 410E Loader, Ground Saw, and CTR Pull Through Delimber. This equipment has a Cummins engine, runs and starts good, strong hydraulics, tight joystick controls, tight boom, main cylinder was just rebuilt, continuous rotation grapple, Delimber and ground saw are in good working order, decent tires and brakes, heat, lights, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD***

Prentice 410E 1999
$33,500
Timberjack 1270 Harvester with a 762C Head

Timberjack 1270 Harvester with a 762C Head

1999 Timberjack 1270 Harvester with a 762C Head. This machine has a 466E Navistar 6 cylinder engine, runs and starts good, 1,500 hours on a total engine rebuild, strong hydraulics, few minor leaks, tight pins and bushing, squirt boom is in good order, joystick controls are in good working condition, 700 tires a few nicks, grab arms and rollers are in working order, good glass. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1270 1999
$46,900
Barko 160C Loader with Bucksaw

Barko 160C Loader with Bucksaw

1999 Barko 160C Loader with Bucksaw. Hour meter reads 12,000 hours. John Deere engine starts and runs good. No blowby. Loader is tight. CSI bucksaw with 9' table. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Barko 160C 1999
$26,000