Photo |
Title
|
Make | Model | Year | Price |
Timbco 425D Feller Buncher1998 Timbco 425D Feller Buncher with a Quadco 22" Saw Head. This machine has been rebuilt, runs and starts good, 2 new final drives, undercarriage was gone through 3,500 hours ago, tight boom, strong hydraulics, head in good working condition, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timbco | 425D | 1998 |
$90,000
|
|
Lemco XLT 185 Self Propelled Log Loader w/ 60" Slasher1998 Lemco XLT 185 Self Propelled Log Loader with 60" Lemco Slasher. This equipment has a John Deere engine, runs and starts good, strong hydraulics and cylinders, all valve banks have been resealed, Sta-Lite self propelled carrier is in good working order, 60" Lemco slasher, straight blade, good teeth, tight boom and grapple, live heal, heat, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Lemco | XLT 185 | 1998 |
$36,500
|
|
John Deere 690ELC Processor1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
John Deere | 690ELC | 1998 |
$39,500
|
|
Eco Log 550B Processor with a Logmax 5000 Head ***SOLD***1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Eco Log | 550B | 1998 |
$22,500
|
|
Ponsse Buffalo Forwarder ***ON HOLD***1998 Ponsse Buffalo S16 Forwarder. This machine has a new CAT 3116 engine, runs and starts good, Wabasto heat system, strong hydraulics, cylinders are all in good working order. New center section, tight K75 boom, newer grapple, bogies are all in good working condition, 700 tires, tracks and chains, heat, A/C, and lights. Well Maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Ponsse | Buffalo | 1998 |
$114,500
|
|
Lemco 72" Saw Table ***SOLD***1998 72" Lemco Saw Table in good working condition. Will need a couple of hoses changed. Used sparingly for tree length and in good condition for age. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Lemco | 72 | 1998 |
$Call for Price
|
|
1998 Valmet 646 ForwarderVALMET 646 DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS EXTENDABOOM FRT TIRES 28L-26 REAR 700/50-26.5 |
Valmet | 646 | 1998 |
$67,900
|
|
Komatsu PC200 Delimber with a Risley 2000B Limit1998 Komatsu PC200 Delimber with a Risley 2000B Limit. This equipment runs and starts good, strong hydraulic and cylinders, straight boom, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 | 1998 |
$50,000
|
|
Morbark 23 NCL Chiparvestor1998-99 Morbark 23 NCL Chiparvestor. This machine has a CAT 3412 engine, 850 HP, runs and starts good, hour meter reads 7,600 hours, twin turbos, strong hydraulics, drum and feed rollers are in good order, knife could use sharpening, decent brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Morbark | 23 NCL | 1998 |
$119,500
|
|
Timbco 415C Harvester with a Ponsse H73 Processing Head1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,900 hours. John Deere 6068T engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins and bushings are good. Rebuilt hydraulic pump 400 hours ago. The 2006 Ponsse H73 Processing Head has an estimated 4,500 hours. Grab arms and feed rollers are in good working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$47,500
|
|
Timbco 415C Harvester with a Ponsse H73 Head1998 Timbco 415C Harvester with a Ponsse H73 Head. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders. Undercarraige is in good working order, single grouser pads. Ponsse H73 head is solid, grab arms and feed rollers are all in good working order, measuring system works as it should, Ponsse 1000 computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$52,500
|
|
John Deere 748GII Skidder1998-99 John Deere 748GII Dual Arch Grapple Skidder. This equipment has a Cummins 8.3 engine, runs and starts good, Power Shift transmission in good working condition, tight center, little play in arch pins, strong hydraulics and cylinders with few minor leaks, 35.5 tires @ 50% with dual rims. Trail blade with tilt. Heat and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 748GII | 1998 |
$39,500
|