Featured in Logging Equipment

2012 John Deere 1210E Forwarder. Hour meter reads 17,000 hours. 710/45-26.5 tires are estimated at 60%, includes a set of tracks. CF7 crane with a squirt boom. Rotating cab, Espar preheat system. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2012 John Deere 1270E 6W Processor with Waratah 616C Processing Head. Hour meter reads 14,112 hours. John Deere 6090 engine, hydrostatic transmission. 710/55-R34 tires are estimated at 80%, 600 tires are estimated at 70%. CH7 crane is tight. New windshield & main lift cylinder. Waratah 616C - went through a full rebuild at 9,500 hours. Self leveling cab with heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2012 Prentice 2384B Loader with CSI 4400 Buck Saw and CTR 426 Delimber. Hour meter reads 14,000 hours. Reman hydraulic pump and pilot pump. Boom is straight, minimal slack. CSI 4400 Buck Saw with an 18' table. CTR 426 delimber is in good working order. John Evans trailer. Cab has heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

2012 Serco 300 Self-Propelled Loader and 2001 Hanfab 72" Slasher. Hour meter reads 14,856 hours. 4,500 hours on newer engine, newer injectors with 1,000 hours. Front & rear ends were replaced in the last year. New webasto preheat system. Brakes and lights on the carrier are in good working order. 2001 Hanfab 72" Slasher has been gone through, no cracks or welds. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

2012 Peterson 4800E Flail Debarker. Hour meter reads 4,856 hours. CAT C9 engine. Completely serviced. Flails are in good working order. 23" diameter opening. Includes remote control. New gearbox, hydraulic motor, coupler kit motor, and cylinders. Also includes a barrel of new chains. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

2012 CAT 501HD with Fabtek 4 Roller Processing Head. Hour meter reads 12,000 hours. CAT C6.6 engine. 24" double grouser pads, undercarriage is estimated at 75%. PF48 head, measuring system is in good working order, feed wheels and knives in good condition. Proheat preheat system. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.