Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 1010E 6 Wheeled Forwarder

John Deere 1010E 6 Wheeled Forwarder

2010 John Deere 1010E 6 Wheeled Forwarder. Hour meter reads 13,002 hours. John Deere 4045 engine. New drive motor, hydraulic pump, & hydraulic motor. Stick cylinder was just resealed. Front tires are estimated at 80%, rear tires are estimated at 50%. Includes a set of ice chains. Rotating cab. Bunks are straight and boom is tight. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1010E 2010
$140,000
 John Deere 1010E Forwarder

John Deere 1010E Forwarder

2010 John Deere 1010E 6wd Forwarder. 4 cylinder JD engine. Rotating cab. Heat & A/C. 600mmx34 front tires & 650mmx24.5 rear tires.

John Deere 1010E 2010
$86,000
John Deere 1110E Forwarder

John Deere 1110E Forwarder

2010 John Deere 1110E Forwarder. Hour meter reads 13,950 hours. John Deere 6068T engine. 710/45-26.5 tires are estimated at 50%. Supergrip bucket, tight CF510 crane & center section. Blade is in good condition. Espar preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1110E 2010
$185,000
Diamond Z 1136 Tub Grinder

Diamond Z 1136 Tub Grinder

2010 Diamond Z 1136 Tub Grinder. Hour meter reads 3,700 hours. CAT C13 engine starts and runs good, 500hp. Crate of additional parts included. Oil analysis checks out great. Used mostly for regrind. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Diamond Z 1136 2010
$190,000
2010 John Deere 1410D Forwarder

2010 John Deere 1410D Forwarder

JOHN DEERE 1410D 8 WHEELED FORWARDER 6 CYL HYDROSTATIC 2 STAGE BOOM ONE OWNER 700X26.5 RUBBER

John Deere 1410D 2010
$169,000
John Deere 1470E with H290 Processing Head

John Deere 1470E with H290 Processing Head

2010 John Deere 1470E with H290 Processing Head. Hour meter reads ~16,000 hours. John Deere 6090H engine starts and runs good. Very dry engine bay, no leaks or buildup. 750/55-26.5 tires on the rear are at 55%. 700/70R34 tires on the front are at 80%. This machine has a tight and dry center section and boom. AFEX fire suppression system, Webasto preheater, self-leveling cab, & Timbermatic computer system. H290 processing head is in good shape, feeders and roller work as they should. Owner operated. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1470E 2010
$131,500
Prentice 2210 Self-Propelled Loader ***SOLD***

Prentice 2210 Self-Propelled Loader ***SOLD***

2010 Prentice 2210 Self-Propelled Loader. Hour meter reads 9,800 hours. Cummins 5.9 engine. New hydraulic pump at 9,000 hours. Self-propelled Hood 4x2 carrier. Plumbed for bucksaw. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Prentice 2210 2010
$43,500
Prentice 2470 Feller Buncher ***SOLD***

Prentice 2470 Feller Buncher ***SOLD***

2010 Prentice 2470 Wheeled Feller Buncher. Hour meter reads 8,846 hours. 6.7L Cummins engine. 28Lx26 tires are estimated at 50%. SH-50 Felling Head. Saw disc and teeth are in good working order and pins & bushing are tight. Joystick controls. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Prentice 2470 2010
$Call for Price
Bandit 3590XL Whole Tree Chipper

Bandit 3590XL Whole Tree Chipper

2010 Bandit 3590XL Whole Tree Chipper. Hour meter shows ~6500 hours. CAT C27 1050 HP w/ optional engine chip to 1370 HP. Engine runs and starts good. Hydronic engine preheated. PT tech clutch. Extended frame, to offset radiator from the engine. Hydraulic reversing fan which increases HP to the chip drum. Upgraded feedbox wall plates to 2" AR 450. Chip pocket upgrades, overs breakers. Overs breaker grates upgrade that bolt in at drum chute. The following upgrades were made at 6,467 hours. New brakes and bearings, new top side of chute, new drum belly wear plate, new infeed chain sprockets, new manifolds and studs 6,467 hours. 36+ inch chipping capacity. Set up for .75" chip size, 2.75+ tons per minute capacity. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA

Bandit 3590XL 2010
$Call for Price
CAT 525C Skidder

CAT 525C Skidder

2010 CAT 525C Grapple Skidder with Winch. Hour meter reads 10,500 hours. CAT C7 engine is newer, installed in 2014. 30.5x32 tires are brand new. Includes chains. Winch is in good working order, no leaks. Heat, A/C, lights, & radio. Machine was just serviced. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

CAT 525C 2010
$77,500
CAT 545C Skidder

CAT 545C Skidder

2010 CAT 545C Dual Arch Grapple Skidder. Hour meter reads 10,270 hours, runs and starts good, strong transmission, strong hydraulics and cylinders, tight center section, grapple and arch are in good working order, new oscillation bearing. 35.5 32 rubber with chains all around. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 545C 2010
$67,500
EcoLog 590D Harvester with a Logmax 7000 Head

EcoLog 590D Harvester with a Logmax 7000 Head

2010 EcoLog 590D Harvester with a Logmax 7000 Head. This harvester has a Mercedes Benz engine, runs and starts good, Wabasto pre heater, strong hydraulics and pumps, pumps have been rebuilt, cylinders and valve bank are in good working order, auxiliary hydraulic cooler. Tight center section, bogies and axles are in good condition, tight boom and squirt boom. 300 crane. Logmax 7000 head in good working order, solid grab arms, bar saw and measuring wheel are in good working condition, Dasa 4 computer system. Good windows, Heat, A/C, and lights. Tires are @ 50% and better, 700 x 30.5 front and 700 x 34 rears. Tracks and chains are @ 50%. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ecolog 590D 2010
$109,500