Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Volvo EC220DL with 2015 Propac 453 Delimber2015 Volvo EC220DL with 2015 Propac 453 Delimber. Hour meter reads 12,410 hours. Volvo D6H 165hp engine. 28" triple grouser pads, undercarriage was just redone spring of 2022 & is estimated at 95%. Forestry package, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Volvo | EC220DL | 2015 |
$165,000
|
|
Vermeer WC2300XL Chipper ***SOLD***2015 Vermeer WC2300XL Whole Tree Chipper. Hour meter reads 1,372 hours. CAT C13 440 HP engine. Chipper features wireless remote, smart feed, and 23" capacity drum style chipper, 8 knife. Feed drum is very sharp, feed chain is tight. Babbitt plate and 2.5 sets of knives will be included. All liners have been recently replaced. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Vermeer | WC23000XL | 2015 |
$Call for Price
|
|
TimberPro TF830B Forwarder ***SOLD***2015 TimberPro TF830B Forwarder. Hour meter reads 8,500 hours. Cummins 8.3 engine starts and runs good. 750/55-26.5 tires are estimated at 75%. Comes with a set of tracks. Has tall stakes and tall headboard. 20 ton axle capacity. Has a 100 gallon fuel tank, auto-reversing fans, Hultdins 360s grapple, super saw. IQAN MDL Control System. Espar preheater. Joystick controls. Heated seat, air ride, & halogen lights. Enclosed cab has heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Timberpro | TF830B | 2015 |
$Call for Price
|
|
TimberPro 725C with a LogMax 7000XT Processing Head2015 TimberPro 725C with 2018 LogMax 7000XT Processing Head. Hour meter reads 14,784 hours. 24" single grouser pads, undercarriage is estimated at 90%. 2018 LogMax 7000XT Processing Head has an estimated 5,000 hours. Machine can be sold with a 2018 processing head for $245,000 or a 2012 for $168,500. Espar preheat system. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Timberpro | 725C | 2015 |
$245,000
|
|
Tigercat 620E Skidder2015 Tigercat 620E Grapple Skidder. Hour meter reads 8,458 hours. Tigercat FPT engine. 30.5x32 tires are estimated at 65% with two new sets of ring chains. Tight center and arch pins. Turnaround seat. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Tigercat | 620E | 2015 |
$110,000
|
|
Tigercat 724G Feller Buncher2015 Tigercat 724G Feller Buncher. Hour meter reads 7,347 hours. 28Lx26 tires are estimated at 90%. 5600 Bunching Saw is in good condition. Webasto preheat system. Center is tight. Heat.A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Tigercat | 724G | 2015 |
$109,000
|
|
Tigercat 635E Bogie Skidder2015 Tigercat 635E Bogie Skidder. Hour meter reads 7,422 hours. Tigercat N67 285 HP engine. Pins, bushings, turn cylinders, & boom cylinders are good. New rear end. Tight center section, arch, & grapple. 35.5x32 tires on the front axle are estimated at 50%, 710/55R34 tires on the bogies are estimated at 40%. Tracks included are estimated at 90%. Webasto preheat system. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Tigercat | 635E | 2015 |
$296,500
|
|
Tigercat 822D Feller Buncher2015 Tigercat 822D Feller Buncher. Hour meter reads 9,000 hours. 24" single grouser pads, complete new undercarriage is a year old, estimated at 90%. Webasto preheat system. Tigercat 5702 felling head is in good condition. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Tigercat | 822D | 2015 |
$249,500
|
|
Serco 75XR Loader ***SOLD***2015 Serco 75XR Loader. 21' knuckle boom with a 4' squirt boom. Continuous rotation grapple. A-frame telescoping stabilizers that are individually controlled. 9,000 LBS. capacity. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Serco | 75XR | 2015 |
$Call for Price
|
|
Ponsse 8W Ergo with H7 Processing Head ***ON HOLD***2015 Ponsse 8W Ergo with 2020 H7 Processing Head. Hour meter reads 12,269 hours. Mercedes engine. Trelleborg 710/45-26.5 tires are estimated at 90%. Inner boom hoses have just been replaced. Webasto preheat system. C5 crane, double squirt boom. 2020 Ponsse H7 processing head, good feed wheels, measuring system is in working order. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Ponsse | Ergo | 2015 |
$295,000
|
|
Ponsse Buffalo King Forwarder2015 Ponsse Buffalo King Forwarder. Hour meter reads 8,500 hours. Mercedes engine. 710/45-26.5 tires are estimated at 60%. Set of rear tracks included are estimated at 50%. Center and K100 crane are tight. Left-side pontoon has a dent and could be replaced. Webasto preheat system. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Ponsse | Buffalo King | 2015 |
$Call for Price
|
|
Morbark 40/36 Chipper2015 Morbark 40/36 Chipper. Hour meter reads 2,955 hours. CAT 765 HP engine starts and runs good. No dents on the belly. Drum pockets are in good working order, drum has some welds. Feed chain and sprocket show no wear, & hydraulics are strong. Chassis and frame are good, chute frame has some welding near blower. Tires and brakes are in excellent condition. LED display. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Morbark | 40/36 | 2015 |
$359,000
|