Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Tigercat 822C Feller Buncher ***SOLD***2010 Tigercat 822C Feller Buncher. Hour meter reads 7,300 hours. 24" double grouser pads, undercarriage is estimated at 30%, unit can include a new complete & installed undercarriage for $220,000. Webasto preheat system. Tigercat 5400 felling head is in good condition. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Tigercat | 822C | 2010 |
$200,000
|
|
Tigercat 845C Feller Buncher with 5702 Head ***SOLD***2010 Tigercat 845C Feller Buncher with 5702 Head. Hour meter reads ~7,500 hours. Mercedes engine. 24" double grousers, will need a set of track pads and chains within the next 1,000 hours. All pins have been replaced in the boom. Heat, A/C, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Tigercat | 845C | 2010 |
$Call for Price
|
|
2010 TIGERCAT H822C2010 TIGERCAT H822C TRACKED SAWHEAD 8.3 CUMMINS 5702 TIGERCAT HEAD |
Tigercat | H822C | 2010 |
$189,000
|
|
Rottne SMV Forwarder2010 Rottne SMV 8 Wheeled Forwarder. Hour meter reads 16,337 hours. John Deere 6068 engine. 700/50-30.5 tires are estimated at 20%. Crane is tight, bunks are straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Rottne | SMV | 2010 |
$58,500
|
|
Rayco T275 Stump Grinder ***SOLD***2010 Rayco T275 Stump Grinder. Hour meter reads 1,617 hours. CB275 Hydra-Stumper stump grinder with 56 Rayco monster teeth. John Deere 275hp turbo diesel engine. High pressure hydrostatic to Gates Polychain GT. 24" double grouser pads, undercarriage is estimated at 40%. Clean air system. Pilot joystick controls. Heat, A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Rayco | T275 | 2010 |
$Call for Price
|
|
Prentice 2210 Self-Propelled Loader ***SOLD***2010 Prentice 2210 Self-Propelled Loader. Hour meter reads 9,800 hours. Cummins 5.9 engine. New hydraulic pump at 9,000 hours. Self-propelled Hood 4x2 carrier. Plumbed for bucksaw. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Prentice | 2210 | 2010 |
$43,500
|
|
Prentice 2470 Feller Buncher ***SOLD***2010 Prentice 2470 Wheeled Feller Buncher. Hour meter reads 8,846 hours. 6.7L Cummins engine. 28Lx26 tires are estimated at 50%. SH-50 Felling Head. Saw disc and teeth are in good working order and pins & bushing are tight. Joystick controls. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Prentice | 2470 | 2010 |
$Call for Price
|
|
2010 PRENTICE 23462010 PRENTICE 2346 DOUBLE BUNK FORWARDER 4 CYL CAT POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 23.1-26 FRT 600/55-26.5 REAR |
Prentice | 2346 | 2010 |
$169,000
|
|
Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head2010 Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head. Hour meter reads 13,000 hours. Mercedes Benz engine starts and runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. 2015 H6 head is in good working order. 700 tires estimated at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Fox | 2010 |
$Call for Price
|
|
Ponsse Ergo with H7 Harvesting Head2010 Ponsse Ergo with H7 Harvesting Head. Hour meter reads 19,789 hours. Mercedes Benz engine. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 40%, includes a set of tracks that are estimated at 85%. Head pump was done. Fiber clutch and pumps were done at 14,500 hours. H7 harvesting head has new knives and bushings. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2010 |
$167,500
|
|
Ponsse Ergo with Ponsse H7 Processing Head2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2010 |
$150,000
|
|
2010 John Deere 1410D ForwarderJOHN DEERE 1410D 8 WHEELED FORWARDER 6 CYL HYDROSTATIC 2 STAGE BOOM ONE OWNER 700X26.5 RUBBER |
John Deere | 1410D | 2010 |
$169,000
|