Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 644 Forwarder

Valmet 644 Forwarder

1997 Valmet 644 Forwarder. Hour meter reads 21,779 hours. Cummins 4BT engine. 3 speed transmission. Tires are estimated at 65%. Valve bank has been completely rebuilt with new seals. No blade, mount is cracked and will need to be welded. Heat, A/C, & joystick controls. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Valmet 644 1997
$34,500
Timberjack 230A Forwarder ***SOLD***

Timberjack 230A Forwarder ***SOLD***

1997 Timberjack 230A Double Bunk Forwarder. Hour meter reads 4,832 frame hours. Cummins 4BT engine, standard shift transmission. 28Lx26 tires are estimated at 75%. Loader and center are tight. F60 loader with SuperGrip 360° bucket. Joystick controls. All manuals included. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberjack 230a 1997
$Call for Price
Timberjack 608 Processor with 2002 Log Max 750 Head

Timberjack 608 Processor with 2002 Log Max 750 Head

1997 Timberjack 608 Processor with 2002 Log Max 750 Head. Hour meter reads ~6,800 hours. 5.9 Cummins engine starts and runs good. 24" single grouser pads with the undercarriage at 65%. Tight boom, hydraulics are strong. Measuring system needs to be put on the Log Max 750 processing head, the head is in good shape. Enclosed cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 608 1997
$52,500
Timberjack 460 Skidder

Timberjack 460 Skidder

1997 Timberjack 460 Grapple Skidder with Winch. Hour meter reads 12,000 hours. Cummins 6BT engine starts and runs good. 30.5x32 tires are estimated at 90%. Winch is in good working order but will need a cable. Center and single arch pins are tight. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 460 1997
$57,500
Timberjack 610 Long Frame Forwarder

Timberjack 610 Long Frame Forwarder

1997 Timberjack 610 Short Frame Forwarder with extension. The following items have 738 hours or less on them: Cummins 4BT engine, 23.1x26 tires, single diamond studded ice chains, clutch, instrument cluster, wiring for the controls, Red Dot A/C System, Espar pre-heater and seat. Many new hoses on the machine. Main lift cylinder recently repacked. This machine is very clean and drySingle extension boom, SuperGrip bucket. Valve bank in completely dry. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 610 1997
$71,500
Timbco 425B Feller Buncher with Quadco 40° Head

Timbco 425B Feller Buncher with Quadco 40° Head

1997 Timbco 425B Feller Buncher with Quadco 40° Head. Hour meter reads 6,824 hours, frame hours are unknown. Reman Cummins 8.3 engine in 2011. 36" triple grouser pads, undercarriage is estimated at 90%. New glass, new teeth. Includes spare parts for Quadco 22B and final drives. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco 425B 1997
$75,000
Tigercat 230 Loader

Tigercat 230 Loader

1997 Tigercat 230 Loader. Hours are unknown, meter stopped working. Cummins 5.9 engine starts and runs good. Boom is tight. Tires are estimated at 70%, landing gear is in good working order. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Tigercat 230 1997
$18,500
Serco 270 Loader on John Deere 640 Skidder

Serco 270 Loader on John Deere 640 Skidder

1997 Serco 270 Loader on John Deere 640 Skidder. New 30.5x32 tires with bear paw chains. Outriggers are in working order. Loader has a live heel and bypass bucket. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Serco 270 1997
$42,500
Morbark Model 23 NCL Chipper

Morbark Model 23 NCL Chipper

1997 Morbark Model 23 NCL Chipper. This machine has 4,200 hours, CAT 550 engine, runs and starts good. Machine was rebuilt in contractors shop 800 hours ago including the following items: new wear plates, belly pans and head liners, new clutch, new in-feed rollers, wireless remote. Chute is in good condition. Dirt separator, this chipper is in excellent shape for the age, produces a very consistent chip. Set up for 7/8" chip currently. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark Model 23 1997
$94,900
Link Belt 3400Q Stroke Delimber

Link Belt 3400Q Stroke Delimber

1997 Link Belt 3400Q Stroke with Denis Boom Delimber. This machine has a re-built Isuzu motor (800 to 1,000 hours ago) runs and starts great, this machine also has new knives, new bushings and pins, and a new turn table. Owner said that the undercarriage is about 75%, strong hydro, joystick controls, will need a few small fixes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA.

Link Belt 3400Q 1997
$18,900
Link-Belt 2800 with a Denharco DT3500 Delimber

Link-Belt 2800 with a Denharco DT3500 Delimber

1997 Link-Belt 2800 with 1998 Denharco DT3500 Delimber. This equipment runs and starts good, around 11,500 hours, strong hydraulics, cylinders and hoses are in order, straight boom and inner boom, knives are in good working condition, butt plate, undercarriage is @ 30%, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Link Belt 2800 1997
$51,500
Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

1997 Komatsu 200LC-6 with a 1998 Lim-Mit 2000B Delimber. This machines main pump was replaced three years ago, newer Cummins 5.9 engine, undercarriage is in good condition, straight boom, delimber in good working condition. tight controls, good hoses, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD***

Komatsu 200LC-6 1997
$35,900