Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 503 Harvester with a 16" Head ***SOLD***

Valmet 503 Harvester with a 16" Head ***SOLD***

1989 Valmet 503 Harvester with a 16" Head. hour meter reads 6,800 hours, 4 cylinder John Deere engine, runs and starts, will need some injectors soon, new right final drive, new joysticks, quick couplers. 23.1 x 26 tires set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Valmet 503 1989
$Call for Price
1989 Timberjack 380B Skidder

1989 Timberjack 380B Skidder

1989 TIMBERJACK 380B GRAPPLE SKIDDER 6 CYL CUMMINS POWERSHIFT 24.5-32 RUBBER NEW TURBO ON ENGINE NEW TRANSMISSION FROM VALLEY

Timberjack 380B 1989
$34,900
Prentice 210D Loader on Mack Truck

Prentice 210D Loader on Mack Truck

1989 Prentice 210D Loader on 1989 Mack Truck. 183,397 miles on the truck, 12,573 hours on the loader. John Deere 6059T engine, & Eaton Fuller 10 speed transmission Bypass grapple with joystick controls. Oil pan is dry, cylinders overall pretty dry, oil lines are wet. 425/65 r22.5X8.25 Bridgestone tires. Tires are at about 80%. Red Dot aftermarket heater. Truck will be removed soon and loader will be placed on carrier if needed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 210D 1989
$19,000
Komatsu PC200 LC-5 with a Denis D-3200-T Delimber

Komatsu PC200 LC-5 with a Denis D-3200-T Delimber

1989 Komatsu PC200 LC-5 with a Denis D-3200-T Delimber. This equipment has a Komatsu engine, runs and starts good, Hour meter reads 10,594 hours, strong hydraulics and pumps. Straight boom and good cables, knives are in good working order, undercarriage is in good condition, 30" triple grouser pads. Chains and sprockets are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu PC200 LC-5 1989
$22,500
John Deere 648D Grapple Skidder

John Deere 648D Grapple Skidder

1989 John Deere 648D Grapple Skidder. This equipment has a newer engine and the hydraulic pump was rebuilt in 2005. Cylinders in good shape. Tight center section. Has arch and grapple set up for it but is currently set up with a 1997 Delta TTS Power Disc Trencher. Trencher is not included in the quoted sale price but can be sold with the machine, arch and grapple for $79,900. 30.5 x 32 tires @ 75% with a set of chains. Cab has heat, A/C, and lights. Stacking blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 648D 1989
$27,500
John Deere 440D Skidder

John Deere 440D Skidder

1989 John Deere 440D Cable Skidder. Hours are unknown. Engine was overhauled. 18.4x26 tires are estimated at 50%, chains are included. Snow plow can be included for an additional cost. Center is tight, winch is strong. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 440D 1989
$29,700
Iron Mule 5510 Forwarder

Iron Mule 5510 Forwarder

1989 Iron Mule 5510 Forwarder. Hours are unknown, meter reads 1,747 hours. Ford 4cyl engine. 23.1x26 tires on the front are new, rears are estimated at 50%. Includes an extra tire without rim & chains. Minor leak on boom cylinder. Center and Gafner hydra-loader are tight. Can include extra tires for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Iron Mule 5510 1989
$22,000
Hydro-Ax 311C w/Bunching 16" Shear and a 8' Flail Delimber

Hydro-Ax 311C w/Bunching 16" Shear and a 8' Flail Delimber

1989 Hydro-Ax 311C Bunching 16" Shear and a 8' Flail Delimber. This equipment has a John Deere 4 cyl. engine, runs and starts good, newer hydraulic pump, strong hydrostatic transmission, tight center section, newer blades on shear, shear cylinders were recently repacked, 28Lx26 Firestone tires @ 75% with a set of chains, decent glass, newer hoses, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 311C 1989
$18,900
Hydro Ax 511B Feller Buncher

Hydro Ax 511B Feller Buncher

1989 Hydro Ax 511B Wheeled Feller Buncher. Hour meter reads 7,450 hours. 5.9 Cummins engine, 2 speed hydrostatic transmission. 28Lx26 Firestone Forestry Specials are estimated at 65%. Straight sheet metal, pins and bushings are good. Timbco 28" bar saw felling head. Risley intermittent head can go with but it has a bad pump. Also includes another bar and 3 new chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Hydro-Ax 511B 1989
$35,000
Hood Loader with 60" Slasher

Hood Loader with 60" Slasher

1989 Hood Loader with 60" Slasher. 1500 hours on rebuilt 6.8L engine. Tight boom, slasher works as it should with strong hydraulics. Enclosed cab with lever controls. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Hood - 1989
$29,900
Bobcat 1080C Feller Buncher with a 16" Bar Saw

Bobcat 1080C Feller Buncher with a 16" Bar Saw

1989 Bobcat 1080C Feller Buncher with a 16" Bar Saw. Hour meter reads 8,840 hours, 4BT Cummings, new auxiliary pump, new heater, extra bars and chains, new bearings and shaft that run the chain, new hydraulic fluid and filters, good tires and tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Bobcat 1080C 1989
$19,500
Barko 160A Loader

Barko 160A Loader

1989 Barko 160A Loader. This unit has a good running Cummins engine, decent pins and bushings, strong hydraulics and cylinders, few minor leaks, tight lever controls, carrier has good brakes and tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Barko 160A 1989
$14,500