Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Bandit Model 2590 Chipper ***SOLD***

Bandit Model 2590 Chipper ***SOLD***

2012 Bandit Model 2590 Chipper. MTHis chipper has a CAT C15 540 HP engine, runs and starts good with 4,000 hours. Wireless Control, Auto-feed System, in-feed conveyor, hydraulic tongue tandem axle with air brakes. Ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Bandit 2590 2012
$235,900
2012 Bandit 3090 Chipper

2012 Bandit 3090 Chipper

Excellent working one owner machine. 780 HP Cat C18 Pre Emission engine. Just over 3,000 hours. Serial number is 4FMUS3527AR001027. Proheater. Built in Air Compressor with Honda Generator. Tires are like new. We do take trades depending on what you have and we can also assist with shipping and financing if needed. Please feel free to call us. Thanks for looking!

Bandit 3090 2012
$169,500
Barko 495ML Magnum Loader with a CSI 264 Delimber *SOLD*

Barko 495ML Magnum Loader with a CSI 264 Delimber *SOLD*

2012 Barko 495ML Magnum Loader with a CSI 264 Delimber. This equipment has a 6.7 Tier III Cummins, runs and starts good, 7,000 hours, Rotobec grapple, strong hydraulics and cylinders, 264 CSI in good working condition, tight boom and grapple, carrier has good brakes and tires, heat, A/C, and lights, was just serviced. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA. ***SOLD***

Barko 495ML 2012
$110,900
CAT 501HD Processor with Fabtek 4 Roller Head

CAT 501HD Processor with Fabtek 4 Roller Head

2012 CAT 501HD Processor with Fabtek 4 Roller Head. This machine has 3,800 hours, runs and starts good, strong hydraulics, undercarriage is in good working condition, tight boom and head, new wiring harness, grease system for bar saw, heat, A/C has been updated by CAT. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 501HD 2012
$Call for Price
CAT 320D FM Carrier with 2016 ProPac 513 Delimber *SOLD*

CAT 320D FM Carrier with 2016 ProPac 513 Delimber *SOLD*

2012 CAT 320D FM Carrier with 2016 ProPac 513 Delimber. This machine has 2,300 hours on carrier, CAT tier III engine, runs and starts good, strong hydraulics, 1,700 hours on ProPac 513 delimber, spare cylinders and a couple of long ProPac hoses, undercarriage is in good work order, landing machine. Remaining engine power train and hydraulic warranty to 6,500 hours or May 2020, warranty transferable. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

CAT 320D FM 2012
$309,000
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H Dual Arch Grapple Skidder with Winch. This machine has a Torque Converter transmission, 30.5 tires, front tires are @ 40%, rear tires are @ 90%, Sweda axles, winch, fuel heater cold start aid, built in chainsaw box on blade, hour meter reads 5,500 hours. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 648H 2012
$132,500
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H Dual Arch Grapple Skidder with Winch. This machine has 6,500 hours, runs and starts good, Direct Drive transmission, tight center, blade and steer cylinders in good condition, 30.5X32 tires, rear tires are @ 75%, front tires are @ 40%, strong winch, heat, A/C, and radio CB. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648H 2012
$164,900
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H D/A Grapple Skidder. This machine has 4,000 hours, runs and starts good, tight pins and bushings, strong hydraulics and DD transmission,winch is in good working condition, tires are 30.5x32 @ 50% with 2 set of chains, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***REDUCED FROM $175,000.00***

John Deere 648H 2012
$162,000
John Deere 437D Loader

John Deere 437D Loader

2012 John Deere 437D Loader with a CSI Ground Saw and Delimber. This equipment has 11,000 hours, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, tight controls, swing gear is in good working order, carrier has good brakes and tires, ground saw and delimber are in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Located in Southeast USA.

John Deere 437D 2012
$86,500
John Deere 703JH Processor w/ Waratah 622B Processing Head

John Deere 703JH Processor w/ Waratah 622B Processing Head

2012 John Deere 703JH with a Waratah 622B Processor. Hour meter reads 8,600 hours, runs and starts good, strong hydraulics, no leaks, undercarriage is @ 70%, 24" pads, double grouser, Timber rite measuring system, tight boom, head is in good working order, Espar pre-heater, heat, A/C, and new LED lights. Will entertain trade options for later model self propelled slasher unit. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 703JH 2012
$229,000
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H Dual Arch Grapple Skidder with Winch. This machine has 7,000 hours, runs and starts good, tight pins and bushings center and arch, strong hydraulics and cylinders, Torque converter machine, 30.x32 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648H 2012
$114,500
John Deere 648H Skidder

John Deere 648H Skidder

2012 John Deere 648H Skidder with Winch. This machine runs and starts good, strong hydraulics, strong winch, tires are @ 75%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648H 2012
$Call for Price