Sort By:   GridGallery
Photo Title
Make Model Year Price
Bandit 2400 Whole Tree Chipper

Bandit 2400 Whole Tree Chipper

2004 Bandit 2400 Whole Tree Chipper. Owner stated that this machine has 3,500 hours, 3412E CAT 860 HP engine, runs and starts good, updated 3 blade disc, strong hydraulics, tight pins and bushings, feed rollers in good working condition. Owner said that this chipper has new bearings 500 hours ago, resealed cylinders and replaced the boom cylinder rod, pilot controls, new rims and tires, good brakes. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Bandit 2400 2004
$135,500

CAT 535B D/A Grapple Skidder ***SOLD***

62,000.00 2004 CAT 535B Dual Arch Grapple Skidder. This machine has a New CAT motor with 1,500 hours on it, engine just redone by CAT for $33,000, has paper work for engine records, tight machine with 10,800 hours, 30.5x32 tires, rear tires are @ 90%, front tires are @ 50% with chains, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northwest USA. ***REDUCED FROM $72,500.00*** ***SOLD***

CAT 535B D/A 2004
$62,000
CAT 525B Skidder

CAT 525B Skidder

2004 CAT 525B Single Arch Grapple Skidder. This skidder has a automatic transmission in good working condition, new center pins, new front cradles, 30.5x 32 tires, heat, A/C, 4-wheel drive works good. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

CAT 525B 2004
$45,900
CAT TK711 Feller Buncher with 2022 Gilbert 22" Head *SOLD*

CAT TK711 Feller Buncher with 2022 Gilbert 22" Head *SOLD*

2004 CAT TK711 Feller Buncher with 2022 Gilbert 22" Head. This machine has a CAT 6 cyl. engine, Hour meter reads 7,319 hours, runs and starts good, recently had a full service, oils and filters, 24" pads, few new pads, undercarriage is @ 60%, strong hydraulics and cylinders, one new grab arm cylinder, tight boom and head, straight disc no cracks or wobble. Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

CAT TK711 2004
$97,500
Chambers Delimbinator Debarker

Chambers Delimbinator Debarker

2004 Chambers Delimbinator Debarker. Owner stated this is a good solid machine, new shaft bearings. Ready for the woods. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Chambers Delimbinator 2004
$55,000
Fabtek FT 133 Processor with a 4 Roller Head

Fabtek FT 133 Processor with a 4 Roller Head

2004 Fabtek FT 133 Processor with a Fabtek 4 Roller Head. This machine has 12,991 hours, runs and starts good, strong hydraulics and cylinders, head is in working order, tight pins and bushings, undercarriage is in good working condition, heat, A/C, and lights. Kawasaki pump and updated U/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Fabtek FT133 2004
$83,500
2004 Fabtek FT133 Processor/Harvester

2004 Fabtek FT133 Processor/Harvester

2004 Fabtek 133 w/4-roller head, new U/C, Deere engine,13,000 hours. Very clean inside and out. Ready for work! Excellent running 6068T Deere engine. Heat and A/C. Pre Heater. We're located 70 miles North of Eagle River, WI and 70 miles Northeast of Hurley, WI. Please visit our website at www.patsheavyequipment.com and feel free to call us as well. We can assist with delivery and financing if needed.

Fabtek FT133 2004
$99,500
2004 Fabtek 133 Harvester

2004 Fabtek 133 Harvester

2004 FABTEK 133 TRACKED HARVESTER FABTEK FOUR ROLLER HEAD 6 CYL DEERE

Fabtek 133 2004
$Call for Price
2004 Fabtek 133

2004 Fabtek 133

Fresh trade in with 13,335 hours. Nice machine for the year and priced to move!

Fabtek 133 2004
$55,000
Hydro-Ax 470 Feller Buncher ***SOLD***

Hydro-Ax 470 Feller Buncher ***SOLD***

2004 Hydro-Ax 470 Feller Buncher. This machine has 8,000 hours, runs and starts good, newer Cummins engine about 700 hours ago, new radiator, tight center section, strong hydraulics, grab arms and cylinders in good order. Disc has a few cracks will need attention soon, 28Lx26 tires @ 50%, tight joystick controls, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***SOLD***

Hydro-Ax 470 2004
$42,500
2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 Feller Buncher

2004 570 hydro ax with 22" sidecut. 1 owner 4650 original hrs newer carbides, new skylight and windshield 2 new front firestone tires 28Lx26 joysticks controls. Heat , air, quick couplers and heat qrid for cold weather starting, and 1 set babac bearpaw chains in good condition. 5.9 cummins, does not burn any oil, and no hydraulic leaks. Greased daily and well maintained, very tight machine ready to work.

Hydro-Ax 570 22" Sidecut 2004
$87,000
John Deere 548GIII Grapple Skidder ***SOLD***

John Deere 548GIII Grapple Skidder ***SOLD***

2004 John Deere 548GIII Grapple Skidder. This machine has 13,000 hours, runs and starts good, strong hydraulics and cylinders, tight pins and bushings, transmission is in good working order, 28Lx26 tires, heat, A/C, and lights. Well maintained. Winch and extra drive shaft included. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

John Deere 548GIII 2004
$65,900