Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Barko 160C Loader with Bucksaw1999 Barko 160C Loader with Bucksaw. Hour meter reads 12,000 hours. John Deere engine starts and runs good. No blowby. Loader is tight. CSI bucksaw with 9' table. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Barko | 160C | 1999 |
$26,000
|
|
Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 160D | 1999 |
$44,500
|
|
1999 FABTEK 548B1999 FABTEK 548B 8 WHEELED DOUBLE BUNK FORWARDER 6 CYL DEERE POWERSHIFT EXTENDABOOM BYPASS BUCKET JOYSTICK CONTROLS 700 RUBBER |
Fabtek | 548B | 1999 |
$74,900
|
|
Hydro Ax 611 Feller Buncher1999 Hydro Ax 611 Feller Buncher. Hour meter reads 6,346 hours. Cummins 6BT engine. 28Lx26 tires are estimated at 85%, new sets of ring chains and double diamond studded ice chains are included. Also includes a rake & bucket. Side post felling head. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Hydro-Ax | 611 | 1999 |
$Call for Price
|
|
Hydro Ax 711 Feller Buncher1999 Hydro Ax 711 Feller Buncher. Hour meter reads 12,032 hours. John Deere 8.1L engine starts and runs good. 28Lx26 tires are estimated at 70%, one is at 15%. One brand new tire can go with for additional cost. Few pins are loose, center is tight. Chains can also be included for an additional cost. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hydro-Ax | 711 | 1999 |
$22,900
|
|
1999 Hyundai 210 LC-3 High Walker Delimber1999 Hyundai 210 LC-3 High Walker, Denharco 3500 Chain drives, Butt saw, Forestry Cab, Heavy Under pans, Auxiliary fuel tank, Hd side panels, Cat walks, 5.9 cummins...ready to work!!!!! |
Hyundai | 210-lc-3 H/W | 1999 |
$Call for Price
|
|
Hyundai 130 Processor with LogMax 750 Head1999 Hyundai 130 Processor with a 2002 LogMax 750 Head. This equipment has a rebuilt head in 2015, brand new Cummins engine, runs and starts good, one year warranty on engine, 28" bar & chain, 26" cut, same as a 7000 LogMax, extra computer & feed rollers, undercarriage is @ 60%, strong hydraulics, tight boom, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hyundai | 130 | 1999 |
$53,500
|
|
John Deere 548GII Grapple Skidder with a Winch1999 John Deere 548GII Grapple Skidder with a Winch. This equipment runs and starts good, new engine @ 9,000 hours, 12,300 total hours. Strong hydraulics and transmission, tight center section, winch is in good working order, 28Lx26 tires, bear claw chains, heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 548GII | 1999 |
$57,500
|
|
John Deere 640GII Skidder1999 John Deere 640GII Cable Skidder. Hour meter reads 15,000 hours. Rebuilt John Deere 6 cyl. engine at 11,000 hours. PowerShift transmission. 23.1x26 tires are estimated at 50%. New radiator, alternator, & injectors. Winch is in good working order. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
John Deere | 640GII | 1999 |
$53,500
|
|
Komatsu PC200 LC-6 with a ProPac 453 Delimber1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 LC-6 | 1999 |
$45,900
|
|
Peterson 4400 Wood Hog Grinder ***SOLD***1999 Peterson 4400 Wood Hog Grinder. Owner stated that this unit has 4,000 hours, CAT V12 engine, runs and starts good, strong hydraulics, new clutch and bearings. Owner said that this machine has a good conveyor, grinder in good working condition, carrier has good brakes and tires. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***SOLD*** |
Peterson | 4400 | 1999 |
$Call for Price
|
|
Prentice 410E Loader with Ground Saw & Delimber *ON HOLD*1999 Prentice 410E Loader, Ground Saw, and CTR Pull Through Delimber. This equipment has a Cummins engine, runs and starts good, strong hydraulics, tight joystick controls, tight boom, main cylinder was just rebuilt, continuous rotation grapple, Delimber and ground saw are in good working order, decent tires and brakes, heat, lights, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD*** |
Prentice | 410E | 1999 |
$33,500
|
- 1
- 2