Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Barko 160A Loader

Barko 160A Loader

1989 Barko 160A Loader. This machine has a good running Cummins engine, decent pins and bushings, strong hydraulics and cylinders, few minor leaks, tight lever controls, carrier has good brakes and tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Barko 160A 1989
$14,950
Bell Super T Feller Buncher with Bar Saw Head *SOLD*

Bell Super T Feller Buncher with Bar Saw Head *SOLD*

1989 Bell Super T Feller Buncher with a Bar Saw Head. This equipment has a 4 cyl. Deutz engine, hour meter reads 3,400 hours, runs and starts good, tight controls, 2 speed hydro-statics, solid boom and strong cylinders - one minor leak, 24.5x 32 tires with Bear claw chains, back tire is in good order, floor heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

Bell Super T 1989
$27,900
Bell Super T with a Bar Saw Head

Bell Super T with a Bar Saw Head

1989 Bell Super T with a Bar Saw Head. This machine has a Deutz engine, runs and starts good, new saw motor, lever controls, good drive system, strong cylinders, decent grab arms and hoses, 28Lx26 tires with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Bell Super T 1989
$22,500
CAT 225 Delimber

CAT 225 Delimber

1989 CAT 225 with 1995 Denis Delimber. Owner stated this machine has a winch drive, 50% U/C, reason for selling is upgrading equipment. Owner stated this is a reliable machine. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***SELLER IS OPEN TO REASONABLE OFFERS***

CAT 225 1989
$29,900
Clark Ranger 666C Cable Skidder

Clark Ranger 666C Cable Skidder

1989 Clark Ranger 666C Cable Skidder. Owner stated that this unit has just had the Cummins 5.9 engine rebuilt, strong hydraulics, tight pins and bushings. Owner said that this machine has a strong Poweshift transmission, tires are 24.5x32, rears 60%, front 30% one chunk missing, 2 sets of chains for it. Ready to Work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Canada. ***REDUCED FROM $28,500.00***

Clark Ranger 666C 1989
$24,500
Clark Ranger F67 Skidder ***SOLD***

Clark Ranger F67 Skidder ***SOLD***

1989 Clark Ranger F67 Skidder - Cummins 5.9, 30.5 X 32 tires, overall excellent condition, one of the nicest Rangers we've ever seen. No winch on the machine currently but we can provide a winch with drive shaft and controls for approximately $4,500. Price on skidder is $27,900. Located in Minnesota USA. We are able to disassemble and put this machine into a container for overseas shipment. Contact Kelly @ 218-720-0933. ***SOLD***

Clark Ranger F67 1989
$27,900
Clark Ranger 665D Skidder

Clark Ranger 665D Skidder

1989 Clark 665D Grapple Skidder with Winch. This skidder has a John Deere 4 cylinder engine, runs and starts good, hour meter reads 9,403 hours, strong hydraulics and cylinders, few minor leaks, Clark 3 speed transmission is in good working order, tight center section, grapple and arch are in good order, winch works as it should, 1/2 super swedge mainline, 23.1x26 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

Clark Ranger 665D 1989
$25,500
Franklin 132 Forwarder ***SOLD***

Franklin 132 Forwarder ***SOLD***

1989 Franklin 132 Forwarder. This machine has a 4BT Cummins Turbo engine, starts & runs good, hours unknown - meter is not working, 4 speed manual transmission in good working order, no brakes, tight boom and grapple, tight center section, strong hydraulics and cylinders, bottom boom cylinder is new, owner built extension on the rear of this forwarder, 28Lx26 tires @ 75% to 50%, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Franklin 132 1989
$15,500
Hood 24000 Loader

Hood 24000 Loader

1989 Hood 24000 Truck Mounted Loader with a Hagen Slasher. This machine has a John Deere engine with 2,000 hours, pump was updated at the same time, Rotobec grapple, loader has tight pins and bushings in boom, cylinders are in good condition, 1994 Hagen Slasher has a 60" blade, 16' bed pump has been gone through, mounted on a Cane truck with a 290 Cummins and a 10 speed, good tires and brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Hood 24000 1989
$27,500
Hood 24000 Self Propelled Loader with Hood 60" Slasher

Hood 24000 Self Propelled Loader with Hood 60" Slasher

1989 Hood 24000 Self Propelled Loader with a 1999 Hood 60" Slasher with Adjustable Butt Plate. This equipment runs and starts good, strong hydraulics and cylinders, few minor leaks, drive system is in working order, tight boom and grapple, heat & lights. Slasher has a straight blade and decent teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hood 24000 1989
$Call for Price
Hydro-Ax 511B Feller Buncher

Hydro-Ax 511B Feller Buncher

1989 Hydro-Ax 511B Feller Buncher. This machine has a recon Cummins 5.9 engine with less than a 1,000 hours, machine runs out good, has the 2 speed hydrostatic transmission, Firestone Forestry Specials @ 60%, straight sheet metal, pins and bushings are good, Risley intermittent Rotosaw model 2100 cutting head. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 511B 1989
$23,000
Hydro-Ax 311C Bunching Shear ***SOLD***

Hydro-Ax 311C Bunching Shear ***SOLD***

1989 Hydro-Ax 311C Bunching Shear. This machine has a John Deere 4 cyl. engine, runs and starts good, new hydraulic pump 1,000 hours ago, strong hydrostatic transmission, tight center section, new blades on shear, shear cylinders were recently repacked, new disconnect switch, new temp gauge, 28Lx26 Firestone tires, decent glass, newer hoses, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 311C 1989
$21,500