Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberpro 725D Harvester with Waratah 622B Head

Timberpro 725D Harvester with Waratah 622B Head

2018 Timberpro 725D Harvester with a 2013 Waratah 622B Harvester Head. Carrier has 1,600 hours, Cummins engine, runs and starts good, pre heat system, air ride and heated seat, backup camera, single grousers in excellent condition. Waratah 622B has approximately 9,000 hours, Timbermatic computer system. 24" pads, counter weights on tracks as well, heat, A/C, and LED lights. Warranty until 2,000 hours. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro 725D 2018
$Call for Price
TimberPro 725B Processor with a Rolly II Head

TimberPro 725B Processor with a Rolly II Head

2010 TimberPro 725B Processor with a Rolly II Head. This machine has a 8.3 Cummins engine, runs and starts good, new injectors last year, strong hydraulics and cylinders, rebuilt final drive on one side, decent CAT undercarriage. Rolly II head feed rollers and grab arms are in good working order, Woodland computer system. Hour meter reads 12,500 hours. Heat, A/C, and lights. Working Daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberpro 725B 2010
$Call for Price
2006 Timberpro TF810

2006 Timberpro TF810

Very well maintained machine. Clean inside and out. 8.3 Cummins runs like a top. Rebuilt injection pump, new center section, new computer, new throttle assembly, and new charge pump. Rubber size is 700/50/26.5 and in good working condition. Roughly 40 to 50% on each tire. Pre heater. Hydrostatic drive. Heat and A/C. Sure grip controls. Ready to go to work. We do take trades depending on what you have. Please feel free to call us anytime. We can also assist with shipping and financing if needed. Thanks for looking! Just over 11,000 hours.

Timberpro TF810 2006
$149,500
2000 TIMRICK 2750 Slasher Loader

2000 TIMRICK 2750 Slasher Loader

Call for pricing. 6068 engine has only 7,500hrs. Call for complete work order info ($80,000 work order completed 647hrs ago): All Booms re-pinned/bushed. Align-boring done where required. All Hydraulics Rebuilt. New Hoses. All Cylinders Rebuilt. Swing Boxes Rebuilt... Too much to fully list!

Timrick 2750 2000
$Call for Price
TMY 45 Skyline Yarder

TMY 45 Skyline Yarder

1977 TMY 45 Skyline Yarder. This equipment has 2 mechanical slack pulling carriages, good cable, strong hydraulics, Cummins 903 engine has been rebuilt, machine has been re-worked, trailer mounted. Call for more Info. Also has a Eaglett Motorized Carriage for sale. More photos available upon request. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

TMY 45 1977
$140,000
Tree Farmer C6D Forwarder ***SOLD***

Tree Farmer C6D Forwarder ***SOLD***

Tree Farmer C6D Forwarder. This machine has a 6 cylinder air cooled Deutz engine, 5 speed manual transmission, brand new hydraulic pump, new clutch, just went through valve bank, tight pins and bushings all around, Cranab loader with 22.5' reach, 23.1 x 26 tires, 1 @ 90%, 3 @ 75%, set of ice pick chains at 75%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***REDUCED FROM $34,500.00*** ***SOLD***

Tree Farmer C6D -
$33,000
Tree Farmer C6D Skidder ***SOLD***

Tree Farmer C6D Skidder ***SOLD***

1983-84 Tree Farmer C6D Grapple Skidder. This machine has a newer Cummins 6BTA engine, runs and starts good, ~1,800 hours on engine, Direct Drive transmission is in good working order, strong hydraulics and cylinders, Esco grapple, tires are @ 50-60%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Tree Farmer C6D 1983
$14,900
Tree Farmer C4 Cable Skidder ***SOLD***

Tree Farmer C4 Cable Skidder ***SOLD***

1970 Tree Farmer C4 Cable Skidder. This machine has a 242 Ford Industrial engine, runs and starts good, Gearmatic winch, center section is in decent condition, 18.4-26 tires @ 50%, transmission is in good working order, strong hydraulics and cylinders, few minor leaks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Tree Farmer C4 1970
$10,500
Tree Farmer C8 Cable Skidder ***SOLD***

Tree Farmer C8 Cable Skidder ***SOLD***

1980 Tree Farmer C8 Cable Skidder. This machine has a good running 653 Detroit engine, strong hydraulic and cylinders, 3 speed transmission is in good working condition, tight center section, 40,000 LBS. Hyster winch, 30.5x32 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Tree Farmer C8 1980
$12,900
Tree Farmer C5D Cable Skidder

Tree Farmer C5D Cable Skidder

1973 Tree Farmer C5D Cable Skidder. This machine has a brand new rebuilt 3 cyl. Detroit, runs and starts good, strong hydraulics and winch, new wiring, new gauges, aluminum radiator with electric fan & automatic sensor. Has new center pins and a new fuel tank, large blade. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Tree Farmer C5D 1973
$15,900
Tree Farmer C5 Cable Skidder ***SOLD***

Tree Farmer C5 Cable Skidder ***SOLD***

1970's Tree Farmer C5 Cable Skidder. This machine has a Detroit 353 engine, runs and starts good, 4 speed manual transmission, new seals, strong hydraulics and cylinders, few minor leaks, Gearmatic model winch in good working condition, center section has some play, 18.4x26 tires @ 75%, with one set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Tree Farmer C5 1970
$12,500
Tree Farmer C5D Skidder

Tree Farmer C5D Skidder

1985 Tree Farmer C5D Grapple Skidder. This equipment has a Detroit 353 engine, runs and starts good, strong hydraulics and Direct Drive transmission, Esco grapple. Can Car winch, with drive shaft, detached right now. Decent center section, arch and grapple are in good order. 18.4 x 26 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Tree Farmer C5D 1985
$Call for Price