Sort By:   GridGallery
Photo Title
Make Model Year Price
Barko 775B Feller Buncher

Barko 775B Feller Buncher

1994 Barko 775B Feller Buncher. This machine has a Cummins 8.3 engine, runs and starts good, under 9,000 hours, strong hydraulics, charge pump and hydrostatics have been gone through, few leaks, decent center section, grab arms and accumulator arms have been re pinned and bushed recently. 22" head, straight disc good teeth. 28L x 26 tires @ 25%. Mono tracks and chains available. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 775B 1994
$27,500
Barko 885B Feller Buncher

Barko 885B Feller Buncher

2000 Barko 885B Feller Buncher. This machine has a Cummins engine, runs and starts good, new drive motor, pretty tight center and head, strong hydraulics, head is in good working condition, tires are @ 30%, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 885B 2000
$35,900
Barko 885B Feller Buncher

Barko 885B Feller Buncher

2003 Barko 885B Feller Buncher. This buncher has 10,512 hours, Cummins engine, runs and starts good, new pump and hydrostatic motor, new seals, tight pins and bushings, head in good working condition, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 885B 2003
$24,500
Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher

Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher

2008 Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher and a Savage Carrier. This equipment has 11,000 hours, engine was rebuilt 6,000 hours, runs and starts good, strong hydraulics and cylinders, self propulsion in good working order, tight boom and grapple, slasher is in good condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 495ML 2008
$95,000
Barko 160C Loader with Bucksaw

Barko 160C Loader with Bucksaw

1999 Barko 160C Loader with Bucksaw. Hour meter reads 12,000 hours. John Deere engine starts and runs good. No blowby. Loader is tight. CSI bucksaw with 9' table. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Barko 160C 1999
$26,000
Barko 160A Log Loader with 360 Grapple

Barko 160A Log Loader with 360 Grapple

1993 Barko 160A Log Loader with 360 Grapple. This equipment has a 4 cyl. Detroit engine. Continuous rotation grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Barko 160A 1993
$15,000
Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher

Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher

1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 160D 1999
$44,500
Barko 495B Loader with CTR Delimber and Hanfab 60" Slasher

Barko 495B Loader with CTR Delimber and Hanfab 60" Slasher

2019 Barko 495B Loader with CTR Delimber and Hanfab 60" Slasher. Hour meter reads 5,700 hours. Live heel. Preheat system. Loader is tight, has good tires, landing gear in good working order. CTR delimber. 2019 Hanfab 60" slasher. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Barko 495B 2019
$199,500
Barko 225 Log Loader with CTR 450 Delimber

Barko 225 Log Loader with CTR 450 Delimber

2000 Barko 225 Log Loader with CTR 450 Delimber. Brand new hydraulic pump, turn table, pins and bushings in the boom. Bucket has a new rotate bearing and turn motor. CTR 450 delimber has good knives and is in good working order. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

Barko 225 2000
$40,000
Barko 160A Loader

Barko 160A Loader

1989 Barko 160A Loader. This unit has a good running Cummins engine, decent pins and bushings, strong hydraulics and cylinders, few minor leaks, tight lever controls, carrier has good brakes and tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Barko 160A 1989
$14,500
2016 BARKO 240

2016 BARKO 240

2016 BARKO 240 TRACKED HARVESTER CUMMINS QSB6 225HP CF18 HEAD AIR AND HEAT

Barko 240 2016
$275,000
Barko 260B Feller Buncher with ProPac 22 360° Head

Barko 260B Feller Buncher with ProPac 22 360° Head

2019 Barko 260B Feller Buncher with ProPac 22 360° Head. Hour meter reads 60 hours. Cummins QSB6.7 Tier 4 Final diesel engine. Undercarriage is estimated at 100%, includes a set of 34" triple grouser pads & 28" single grouser pads. Proheat preheat system. IQAN-MD4 display. Heated air-ride seat, heat, A/C, radio, lights. On-board air compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

Barko 260B 2019
$420,000