Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Peterson 4400 Wood Hog Grinder ***SOLD***

Peterson 4400 Wood Hog Grinder ***SOLD***

1999 Peterson 4400 Wood Hog Grinder. Owner stated that this unit has 4,000 hours, CAT V12 engine, runs and starts good, strong hydraulics, new clutch and bearings. Owner said that this machine has a good conveyor, grinder in good working condition, carrier has good brakes and tires. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***SOLD***

Peterson 4400 1999
$Call for Price
Hydro Ax 611 Feller Buncher

Hydro Ax 611 Feller Buncher

1999 Hydro Ax 611 Feller Buncher. Hour meter reads 6,346 hours. Cummins 6BT engine. 28Lx26 tires are estimated at 85%, new sets of ring chains and double diamond studded ice chains are included. Also includes a rake & bucket. Side post felling head. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Hydro-Ax 611 1999
$Call for Price
1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker, Denharco 3500 Chain drives, Butt saw, Forestry Cab, Heavy Under pans, Auxiliary fuel tank, Hd side panels, Cat walks, 5.9 cummins...ready to work!!!!!

Hyundai 210-lc-3 H/W 1999
$Call for Price
Timberjack 610 Forwarder ***SOLD***

Timberjack 610 Forwarder ***SOLD***

1999 Timberjack 610 Forwarder. Hour meter reads ~13,000 hours. Cummins 4BT engine. 23.1x26 tires are estimated at 60%, includes 2 like new sets of chains. Serco 4000 loader is tight. There is a toolbox included that is not pictures. Service and operator manuals. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Timberjack 610 1999
$Call for Price
Timberjack 560 Grapple Skidder with Winch

Timberjack 560 Grapple Skidder with Winch

1999 Timberjack 560 Grapple Skidder with Winch. Cummins 5.9 engine starts and runs good. 6 speed Power Shift transmission shifts well. 30.5x32 tires, rears are at 70%, fronts are estimated at 60%. Includes a set of ring chains estimated at 80%. New harmonic balancer, cutting edge, bearings in log arch. Fresh service, fluids, and paint job. This is a well maintained machine ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Timberjack 560 1999
$Call for Price
Timberjack 1270B with 762C Processing Head ***SOLD***

Timberjack 1270B with 762C Processing Head ***SOLD***

1999 Timberjack 1270B with 762C Processing Head. Hours are estimated at 22,500 hours. DT 466 engine, hydrostatic transmission. 700/55-34 & 700/50-26.5 tires are estimated at 75%. Newer main pressure and pilot valves. Tight center, pins, & bushings. Squirt boom. Timberjack 3000 computer system. 762C processing head has newer saw assembly, bearing, & auto chain tightener. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberjack 1270B 1999
$Call for Price
Hydro Ax 711 Feller Buncher

Hydro Ax 711 Feller Buncher

1999 Hydro Ax 711 Feller Buncher. Hour meter reads 12,032 hours. John Deere 8.1L engine starts and runs good. 28Lx26 tires are estimated at 70%, one is at 15%. One brand new tire can go with for additional cost. Few pins are loose, center is tight. Chains can also be included for an additional cost. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hydro-Ax 711 1999
$22,900
Valmet 840 Forwarder

Valmet 840 Forwarder

1999 Valmet 840 8 Wheeled Forwarder. Hours are unknown. Ford 4 cylinder engine. Runs and operates. 700/50R26.5 tires are estimated at 20%. Bunks are straight, Cranab 650XL loader with squirt boom. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 840 1999
$23,900
Barko 160C Loader with Bucksaw

Barko 160C Loader with Bucksaw

1999 Barko 160C Loader with Bucksaw. Hour meter reads 12,000 hours. John Deere engine starts and runs good. No blowby. Loader is tight. CSI bucksaw with 9' table. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Barko 160C 1999
$26,000
Prentice 410E Loader with Ground Saw & Delimber  *ON HOLD*

Prentice 410E Loader with Ground Saw & Delimber *ON HOLD*

1999 Prentice 410E Loader, Ground Saw, and CTR Pull Through Delimber. This equipment has a Cummins engine, runs and starts good, strong hydraulics, tight joystick controls, tight boom, main cylinder was just rebuilt, continuous rotation grapple, Delimber and ground saw are in good working order, decent tires and brakes, heat, lights, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD***

Prentice 410E 1999
$33,500
Valmet 840 6 Wheeled Forwarder

Valmet 840 6 Wheeled Forwarder

1999 Valmet 840 6 Wheeled Forwarder. Hour meter reads ~13,000 hours. This machine has a Sisu engine, extenda-boom, tracks and chains, good reliable forwarder, working daily. Major work done includes, valve bank re-seal, rear differential re-seal and brakes, new center oscillation bearings, main boom line bored, new pins and bushings, extenda-boom wear pads, radiator removed and chemical washed, starter and alternator, new A/C pump and expansion valve, new front tire, the rest are 60% or so, new water pump, grapple pins and bushings, new tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 840 1999
$38,000
Timberjack 1270B Harvester with a 762C Head

Timberjack 1270B Harvester with a 762C Head

1999 Timberjack 1270B Harvester with a 762C Head. This unit has an International DT 466 engine, runs and starts good, preheat system, &strong hydraulics and cylinders. Pump and hydrostats are in good working order, joystick controls, one joystick has been recently rebuilt, tight boom, boom base has new bearings. 762C head and measuring system is in good condition, 26" bar, new end coder and diameter censor, also has 3 sets of feed rollers, peeling rollers, spiked rollers and rubber rollers. Good front glass installed recently. 600 tires with tracks and chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 1270B 1999
$39,500