Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Komatsu PC200 LC-8 with Denharco DMC4140 Delimber2008 Komatsu PC200 LC-8 with Denharco DMC4140 Delimber. Cylinders are dry. Hydraulic hoses are dry. Cummins engine. Bypass grapple & top saw on the delimber. Undercarriage at about 30%. 28" double grouser pads. New set of rails and pads that could go with. Denharco DMC4140 Delimber is in good shape. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC200 LC-8 | 2008 |
$42,500
|
|
Ponsse Buffalo Forwarder2008 Ponsse Buffalo Forwarder. Hour meter reads 17,490 hours. 710/45-26.5 tires are estimated at 70%, includes a set of tracks that are estimated at 95%. K100M crane. Webasto preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Ponsse | Buffalo | 2008 |
$117,500
|
|
Morbark 4600XL Wood Hog Horizontal Grinder2008 Morbark 4600XL Wood Hog Horizontal Grinder. Hour meter reads 4,562 hours. CAT C3412, 760 HP Engine. Repairs completed at 3,280 hours. New Conveyor Belt, Rebuilt Hammermill including new bearings, rotor plates, rotor rods, hammers, inserts, and rakes. The machine is in good condition overall. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 4600XL | 2008 |
$270,000
|
|
Valmet 425EXL Feller Buncher2008 Valmet 425EXL Feller Buncher with a 20" 40 Degree Quadco Head. This buncher has a Cummins 8.3 engine, runs and starts good, hour meter reads 11,800 hours. strong hydraulics and cylinders. Leveling system and swing bearing are in good condition. Both pumps have been replaced. Espar pre heater. Undercarriage just gone through new sprockets, new bottom rollers, and new 28" double grouser pads. Just went through some hoses and valve bank. Heat works, A/C needs a charge. LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Valmet | 425EXL | 2008 |
$115,000
|
|
Ponsse Ergo Harvester with H7 Head2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 2008 |
$115,000
|
|
Tigercat 1055B Forwarder2008 Tigercat 1055B 8 Wheel Double Bunk Forwarder. Hour meter reads ~18,000 hours. Mercedes engine, hydrostatic transmission. 710 tires are estimated at 50%, includes a set of rear tracks that are in good condition. Heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Tigercat | 1055B | 2008 |
$89,900
|
|
Valmet 603 Feller Buncher2008 Valmet 603 Feller Buncher. Hour meter reads 12,730 hours. Cummins 4BT 130hp engine. Hydrostatic transmission. 28Lx26 tires are estimated at 60%. Koehring felling head, good disc & teeth, minimal welds. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Valmet | 603 | 2008 |
$52,500
|
|
Valmet 425EXL Feller Buncher with Quadco 22B 360° Head2008 Valmet 425EXL Feller Buncher with Quadco 22B 360° Head. Hour meter reads 13,369 hours. Cummins 8.3 engine. 24" single grouser pads, undercarriage is estimated at 30%. Leveling system and swing bearing are in good condition. Espar pre heater. Quadco 22B 360° has a good disc and teeth, minimal welding. Heat, A/C, radio. lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Valmet | 425EXL | 2008 |
$97,500
|
|
Timberking TK560DS Loader with Propac 60" Slasher2008 Timberking TK560DS Loader. Hour meter reads ~10,000 hours. Perkins 6cyl diesel engine. Boom is tight, live heel, hydraulic landing gear is in good working order. Propac 60" Slasher has a good blade and teeth. SureGrip joystick controls. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberking | TK560DS | 2008 |
$68,500
|
|
Valmet 425EXL Harvester with Quadco 5660 Head ***SOLD***2008 Valmet 425EXL Harvester with Quadco 5660 Head. Hour meter reads 9,310 hours, newer Cummins 8.3L engine has 1,609 hours. New main auxilliary pump was installed summer of 2022. 24" single grouser pads, undercarriage is estimated at 80%, some rollers will need to be replaced. Quadco 5660 intermittent harvesting head, feed wheels and motors are in good working order. Newer main saw, rollers, bearings, gears, and ring gear. Espar preheat system, heat, A/C, & leveling cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA. ***SOLD*** |
Valmet | 425EXL | 2008 |
$Call for Price
|
|
2008 CAT 501HD2008 CAT 501HD TRACKED HARVESTER 6 CYL CAT REBUILT ENGINE BY MICHIGAN CAT WITH WARRANTY FOUR ROLLER HEAD |
CAT | 501HD | 2008 |
$189,000
|
|
CAT 501 Processor with Fabtek 4 Roller Head ***SOLD***2008 CAT 501 with Fabtek 4 Roller Head. Hour meter reads ~20,000 hours. Has had a reman CAT engine installed. 24" triple grouser pads, undercarriage is in good working order. Fabtek 4 roller head has a reman frame, and one feed roller has just been rebuilt. Heat, A/C, and radio in cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
CAT | 501 | 2008 |
$87,500
|
- 1
- 2