Sort By:   GridGallery
Photo Title
Make Model Year Price
Vermeer BC1400 Chipper

Vermeer BC1400 Chipper

2006 Vermeer BC1400 Chipper. This equipment has a 14” capacity. This self-feeding drum style chipper is Powered by a Caterpillar turbo diesel engine, runs and starts good, 1,347 hours, been cleaned, serviced, fully tested, knives in good order with extras. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Vermeer BC1400 2006
$22,500
Timberjack 1270D Harvester with a 758HD Head

Timberjack 1270D Harvester with a 758HD Head

2006 Timberjack 1270D Harvester with a 758HD Head. This machine runs and starts good, new injection pump, new water pump, strong hydraulics and hydrostatics. New pumps - main and work pump. Tight boom, new king post and bearings. 758HD head in good working order. Timbermatic 300 measuring system, fresh oil service all around - synthetic oil. Espar pre-heat system. 5 of 6 tires are @ 50%, 1 tire is @ 30%, one set of tracks. Rotating and tilting cab, works excellent. New computer and wiring harness installed recently. Also has a lot of parts for the head, knives, feed wheel, arms, motors, 2 HHMs, saw motor. Large selection of spare parts, engine, differential, pump and hydraulic motor, coolers, all the modules, joy sticks, cylinders, etc. Has a extra parts from a dismantled machine. Spare John Deere 6081 engine with 13,000 hours. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Timberjack 1270D 2006
$Call for Price
2006 John Deere 1010D Forwarder

2006 John Deere 1010D Forwarder

2006 JD 1010D forwarder. JD 4 cyl. turbo engine , which was rebuilt around 450 hours ago. New center pins. Loglift loader with extenda boom & 260 SuperGrip bucket. Preheater. 600mm tires around 60% to 70%. Very nice machine!

John Deere 1010D 2006
$110,000
Valmet 644 Double Bunk 6 Wheel Forwarder

Valmet 644 Double Bunk 6 Wheel Forwarder

2006 Valmet 644 Double Bunk 6 Wheel Forwarder. Hour meter reads 7,000 hours on a Cummins 6BT engine, runs and starts good, strong hydraulics and cylinders, new pumps 6 months ago, tires are @ 90%, solid bogies, tight boom and grapple, squirt boom in good working order, quick couplers, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 644 2006
$56,500
Tigercat 220 Log Loader

Tigercat 220 Log Loader

2006 Tigercat 220 Log Loader. This equipment has a Cummins 5.9 engine, runs and starts good, hour meter reads 9,788 hours, strong hydraulics and cylinders, hydrostatic drive is in good working order, tight boom, 360 grapple, new landing gear and outriggers. Big John carrier, decent tires, good brakes, joystick control, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Tigercat 220 2006
$Call for Price
Valmet 860.1 6 Wheel Forwarder

Valmet 860.1 6 Wheel Forwarder

2006 Valmet 860.1 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, 12,500 hours, strong hydraulics, new hydraulic pump, tight center section, axles and bogies are all in good working order, new bogie bearings and seals, tight boom and grapple. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 860.1 2006
$119,000
Timberking TK340 Feller Buncher

Timberking TK340 Feller Buncher

2006 Timberking TK340 Feller Buncher. This equipment has a CAT 3126 175 HP engine, runs and starts good, hydrostatic transmission, 2 speed transfer case, joystick controls, strong hydraulics and cylinders, tight center, 20" saw head and disc are in good working order, 28L x26 tires, heat, A/C,and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Timberking TK340 2006
$33,500
 2006 Timberpro TF810 8x8 Forwarder

2006 Timberpro TF810 8x8 Forwarder

Very well maintained machine. Clean inside and out. 8.3 Cummins runs like a top. Rebuilt injection pump, new center section, new computer, new throttle assembly, and new charge pump. Rubber size is 700/50/26.5 and in good working condition. Roughly 40 to 50% on each tire. Pre heater. Hydrostatic drive. Heat and A/C. Sure grip controls. Ready to go to work. We do take trades depending on what you have. Please visit our website at www.patsheavyequipment.com and feel free to call us anytime. We can also assist with shipping and financing if needed. Thanks for looking! Just over 11,000 hours.

Timberpro TF810 2006
$149,500
John Deere 548GIII Skidder

John Deere 548GIII Skidder

2006 John Deere 548GIII Grapple Skidder with Winch. This skidder runs and starts good, strong hydraulics and transmission, cylinders are in good working order, dry and tight, everything works as it should. Winch is in good working condition. Lights, wipers, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 548GIII 2006
$82,500
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2006 Ponsse Ergo Harvester. This machine has ~17,300 frame hours, runs and starts good. Engine has been recently gone through, including - new block, rebuilt head and injectors, new drive coupler, and new input shaft. Strong hydraulics, HN 200 Crane, H73E head, both in good working condition, new delimbing knives, auto lube system. New crane swing motor and resealed drive 500 hours ago, one set of tracks @50%, set of chains @ 70%, heat, A/C. Machine is in good condition for age and hours. Seller is open to trade on forwarder, dozer, log truck or cable skidder. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *Seller is open to reasonable offers*

Ponsse Ergo 2006
$92,500
John Deere 703G Feller Buncher

John Deere 703G Feller Buncher

2006 John Deere 703G Feller Buncher with a GN Roy 21" 360 Head. Hour meter reads 13,000 hours, machine has new saw bearings, strong hydraulic cylinders, pumps replaced 1,500 hours ago, undercarriage is @ 70%. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 703G 2006
$Call for Price
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2006 John Deere 648GIII Dual Arch Grapple Skidder. This equipment has 400 hours on a rebuilt engine, runs and starts good, strong hydraulics and cylinders, decent center section, new grapple pins. New rear tires and chains, front tires and chains are @ 85%, 30.5x32 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 648GIII 2006
$Call for Price