Featured in Logging Equipment
| Photo |
Title
|
Make | Model | Year | Price |
|
Morbark 30/36 Whole Tree Chipper1998 Morbark 30/36 Whole Tree Chipper with Cab & Loader. Meter reads 1,200 but is incorrect. 425hp engine. Needs a new clutch or can be replaced before sale for an additional cost. New infeed chain, tires are good, wireless remote included. Owner states drum is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 30/36 | 1998 |
$56,500
|
|
Tree Farmer C7F Skidder1998 Tree Farmer C7F Grapple Skidder with Winch. Skidder is a 1998 but had a full factory rebuild in 2002. Hour meter reads 7,132 hours. Cummins 5.9 engine starts and runs good. 30.5x32 tires estimated at 30%. Set of ring chains included that are estimated at 50%. Esco grapple. Winch is strong and in good working order. Blade is in good condition. Straight machine that's woods ready. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Tree Farmer | C7F | 1998 |
$27,500
|
|
Timberjack 608 Feller Buncher with 22" Felling Head1998 Timberjack 608 Feller Buncher with 22" Felling Head. Hours are unknown. Cummins engine starts and runs good. 24" single grouser pads, undercarriage estimated at 50%. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
Timberjack | 608 | 1998 |
$25,000
|
|
Timbco 415C Harvester with a Ponsse H73 Processing Head1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,900 hours. John Deere 6068T engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins and bushings are good. Rebuilt hydraulic pump 400 hours ago. The 2006 Ponsse H73 Processing Head has an estimated 4,500 hours. Grab arms and feed rollers are in good working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$47,500
|
|
Komatsu PC200 with Limmit 2000B Delimber1998 Komatsu PC200 with Limmit 2000B Delimber. Hour meter reads 10,800 hours. Komatsu ST5 engine. 32" triple grouser pads, undercarriage is estimated at 85%. Hydraulic pump was redone at 7,500 hours. 32" triple grouser pads, undercarriage is estimated at 85%. 1998 Limmit 2000B delimber, has a topping saw, will delimb a 24" log. Measuring system was purchased from Risley. Boom is straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
Komatsu | PC200 | 1998 |
$84,500
|
|
Hydro-Ax 511EX with 20" Koehring Felling Head ***SOLD***1998 Hydro-Ax 511EX with 20" Koehring Felling Head. Cummins 5.9L engine starts and runs good. 28Lx26 tires are estimated at 75%, includes 2 sets of chains. Center pins are tight. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
Hydro-Ax | 511EX | 1998 |
$Call for Price
|
|
John Deere 690ELC Processor1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
John Deere | 690ELC | 1998 |
$39,500
|
|
CAT 515 Skidder ***SOLD***1998 CAT 515 Grapple Skidder with Winch. Hour meter reads 9,500 hours. CAT 3304 engine starts and runs good. 28Lx26 tires are estimated at 90%. Includes double diamond chains all around. Winch is in good working order. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
CAT | 515 | 1998 |
$Call for Price
|
|
Link Belt 2800 Quantum with ProPac 453 Delimber1998 Link Belt 2800 Quantum with ProPac 453 Delimber. This equipment has an Isuzu 6 cyl. engine, starts & runs good, strong pumps and drive motor, straight boom and good cables. Undercarriage is in good working order. Hour meter reads 13,500 Hours. New windows & seat. Fresh oil and all filters. Runs perfect. Circle topping saw - just had the saw hammered, new teeth. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Link Belt | 2800 | 1998 |
$64,500
|
|
John Deere 843G Feller Buncher1998 John Deere 843G Feller Buncher. Less than 500 hours on rebuilt engine. 24.5-32 tires are estimated at 40, includes chains that are estimated at 40%. Fresh service, new hoses, & new teeth on the head. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 843G | 1998 |
$29,000
|
|
Timberjack 460 Skidder1998 Timberjack 460 Grapple Skidder with Winch. Cummins 5.9 engine starts and runs good. New injectors, windows, and rebuilt transmission. 28Lx26 tires are estimated at 85%. Arch pins and center pins are tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timberjack | 460 | 1998 |
$29,500
|
|
Lemco XLT 280 Loader with Siiro 60" Slasher1998 Lemco XLT 280 Loader with Siiro 60" Slasher. Hour meter reads 9,626 hours. John Deere 6068 engine starts and runs good. Bypass grapple. Slasher saw hookups and self-propelled carrier. Tires are estimated at 70%. Siiro 60" Slasher with a straight saw & good teeth can be included for an additional $7,000. Bangboard on chassis is included. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Lemco | XLT 280 | 1998 |
$33,000
|