Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 230 Forwarder

Timberjack 230 Forwarder

1997-98 Timberjack 230 Single Bunk Forwarder. This machine has 8,002 hours, Cummins 4BT engine, runs and starts good, no blow by. Strong hydraulics and transmission, tight center section, tight pins and bushings in the boom and bypass grapple. Steer and blade cylinders are in good order. Tires are 28Lx26 - rear are @ 75%, front tires are @ 50%, with 1 set of diamond chains @ 40%. Solid axles and cradles, good brakes. Fluids were just changed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 230 1997
$51,500
Timberjack 610 Double Bunk Forwarder

Timberjack 610 Double Bunk Forwarder

1997 Timberjack 610 Double Bunk Forwarder. This machine has a Cummins, 4BT engine, runs and starts good, 11,000 hours, rebuilt transmission and transfer case, clutch was redone, boom was recently gone through, new rotator head - Pro Link snubber, strong hydraulics - 2 new pumps, new brakes, 2 new 28Lx26 tires, A set of Bear Claw chains 70-80%, spare rim, heat, A/C, and LED lights. Contact Aaron Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 610 1997
$56,500
Link-Belt 2800 with a Denharco DT3500 Delimber

Link-Belt 2800 with a Denharco DT3500 Delimber

1997 Link-Belt 2800 with 1998 Denharco DT3500 Delimber. This equipment runs and starts good, around 11,500 hours, strong hydraulics, cylinders and hoses are in order, straight boom and inner boom, knives are in good working condition, butt plate, undercarriage is @ 30%, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Link Belt 2800 1997
$64,900
Serco 170A Self Propelled Loader

Serco 170A Self Propelled Loader

1997 Serco 170A Self Propelled Loader with a 2004 Pull Behind Sirro Processor (8'-12') with 60" Saw. This equipment was a back up loader/processor. John Deere engine has 500 hours on rebuild, runs and starts good, has been re-pumped, rebuilt gear motor, swing gear is in good order. 2004 Siiro Processor has manual adjustments, Processor was rebuilt in 2008, new butt plate. Lever controls, self propelled carrier is in working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Serco 170A 1997
$37,500
Chambers Delimbinator Flail Delimber

Chambers Delimbinator Flail Delimber

1997 Chambers Delimbinator Flail Delimber. This equipment has 800 hours on a complete reconditioning. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Chambers Delimbinator 1997
$38,500
1997 Timbco T415 Feller Buncher

1997 Timbco T415 Feller Buncher

With 20inch Quadco Head. Call Today **Also have available, Risley BarSaw Head. Designed to cut large diameter hardwood (33 inch cut)**

Timbco T415-C 1997
$50,000
45' 4 Bunk Tri Axle Centermount Trailer ***SOLD***

45' 4 Bunk Tri Axle Centermount Trailer ***SOLD***

1997 45' 4 Bunk Tri Axle Centermount Trailer with Rotobec BWS 80 Elite XT Log Loader. New air ride axles 1 year ago, no cracks or welds, plate and pins are good, loader is extremely tight and dry. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Rotobec 80 Elite XT 1997
$30,900
Timberjack 608 Processor with a Logmax 650 Head *SOLD*

Timberjack 608 Processor with a Logmax 650 Head *SOLD*

1997 Timberjack 608 Processor with a Logmax 650 Head. This equipment has a newer Cummins 5.9 engine with ~4,000 hours, runs and starts good, strong hydraulics and cylinders, undercarriage is @ 60%, 24" pads, Logmax head is in good working order, has a 392 Logmate computer, strong pumps, pins and bushings are in good working order, tight boom and head, heat, A/C, and block heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 608 1997
$50,000
CAT 525 Skidder ***SOLD***

CAT 525 Skidder ***SOLD***

1997 CAT 525 Grapple Skidder with Winch. Hour meter reads 7,300 hours, runs and starts good, strong hydraulics and transmission, new pins and bushings, steer cylinders have been gone through, flotation tires @ 75% or better, winch is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

CAT 525 1997
$35,500
Timbco T435 Feller Buncher

Timbco T435 Feller Buncher

1997 Timbco T435 Feller Buncher. This machine has a new 8.3 Cummins engine with less than a 100 hours, runs and starts good, strong hydraulics, no major leaks, Quadco head is in good working condition, new track tensioners, replaced track rollers, new master link in both tracks, new directional drive pumps and implement pumps, new saw teeth, new grapple arm rubber bands, receipts for all repairs and parts. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

Timbco T435 1997
$54,900
Timberjack 460 Skidder

Timberjack 460 Skidder

1997 Timberjack 460 Grapple Skidder. Machine runs & works but will need the electronic shifter replaced or repaired as it shifts gears on its own sometimes. Contact Kelly @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***REDUCED FROM $14,900.00*** Will consider trades.

Timberjack 460 1997
$12,500
Timberland Insulated Tree Trimmer ***SOLD***

Timberland Insulated Tree Trimmer ***SOLD***

1997 Timberland Insulated Tree Trimmer Saw mounted on 1997 TSE Timberland T-600 Articulating Log Skidder. Machine has a Cummins 5.9 diesel, Clark 4-speed shuttle shift, EROPS and backfill blade, winch, Firestone Steel sShield tires, new blade on front, new belts, new saw bearings, 5 blade trimmer. Owner purchased to clean farm property and no longer needs machine. Ready to Work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Northcentral USA. ***SOLD***

Timberland - 1997
$24,900