Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 748E Grapple Skidder

John Deere 748E Grapple Skidder

1996 John Deere 748E Grapple Skidder. This skidder has less than 4,000 hours on hydraulic pump, Recon John Deere engine and radiator less than 600 hours ago, two new Firestone 43 tires last year, chains are @ 80%, lights are in working order, heater, no A/C - possibly needs a pump, Wabasto and block heater, center has a bit of play, tight cradle. Boom and arch arch are tight, lift cylinders seep but not bad. New Lexan in front window. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 748E 1996
$32,500
Timbco 415B Harvester with a 2 Roller Fabtek 18" Head

Timbco 415B Harvester with a 2 Roller Fabtek 18" Head

1996 Timbco 415B Harvester with a Fabtek Roller II 18" Head. This machine has a new undercarriage in Nov. 2017 - is @ 95%, spring 2017: new seat, joysticks, front window, and LED lights on front . New Parker Denison pumps in 2015 and new pump drive in 2015. John Deere engine was rebuilt in 2012, 8,500 hours on it at that time, everything but the injectors and turbo, as the previous owner had just replaced them. Newer injectors and turbo on it in fall 2017. Has a revamped 2 roller Fabtek head 18" with on board L 90 Parker valves, High Country Tech computer. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415B 1996
$59,500
John Deere 690E with a Lim-mit 2000B Delimber

John Deere 690E with a Lim-mit 2000B Delimber

1996 John Deere 690E with a Lim-mit 2000B Delimber. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, boom cylinder is being rebuilt. drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. 2000B LIM-MIT delimber has straight boom, chains and roller in good working order, sharp knives, circular topping saw, Espar pre heat system, fuel heater, forestry guard package. Heat lights, a/c needs charge. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA.

John Deere 690E 1996
$62,500
Highlead Yarder for Sale

Highlead Yarder for Sale

Prototype yarder built in 1996 to haul small diameter logs, 12"-16". Tower is 20' with 3 drums for a highline, mainline and haulback line, 1500'. Shot gun carriage. Ford Industrial 6 cylinder engine. Mounted on a 3 axle gooseneck trailer with 4 hydraulic outriggers. Auxillary hydraulic winch. Yarder will need some TLC and hydraulic system checked for completeness. Tires on trailer need replaced. Property selling so must sell.

Home Built 1 1996
$12,500
John Deere 540E Cable Skidder

John Deere 540E Cable Skidder

1996 John Deere 540E Cable Skidder. This equipment has a 6059T engine, Powershift transmission, 13,700 frame hours, 28L x 26 tires at approx 30%, some play in the center pin, new carrier bearing, new seat, good brakes, good clutch, new exhaust, new master switch. Recently fixed drive shaft, new 3/4" mainline, rebuilt arch, open air cab, quick couplers for cold starts. New chains all around. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 540E 1996
$33,500
John Deere 648G Skidder

John Deere 648G Skidder

1996 John Deere 648G Dual Arch Grapple Skidder. This machine has a new crate engine put in 4,000 hours ago, runs and starts good, Power Shift transmission was rebuilt by John Deere in 2012 and is in good working order, strong hydraulics and cylinders, tight pins and bushings in the center and grapple, axles and cradles are in good condition, 30.5 x32 tires, heat, and lights. Clean dry machine for the age. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648G 1996
$37,900
Timberjack 450 Skidder

Timberjack 450 Skidder

1996 Timberjack 450 Grapple Skidder with Winch. This machine has a Cummins 5.9 engine runs and starts good, strong Power Shift transmission, tight center section, strong winch, newer 23.1 x 26 tires. Esco grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 450 1996
$38,500
John Deere 648G Skidder

John Deere 648G Skidder

1996 John Deere 648G Dual Arch Grapple Skidder. This machine has a newer remaned engine, 2,583 on engine, runs and starts good, Power Shift transmission is in good order, strong hydraulics and cylinders, tight pins and bushings in the center and grapple, axles and cradles are in good condition, 30.5 x32 tire @ 60%, dual rims on the rear, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648G 1996
$38,500
Franklin 132 Forwarder

Franklin 132 Forwarder

1996 Franklin 132 Single Bunk Forwarder. This machine has a 4BT Cummins engine, runs and starts good, strong hydraulics and cylinders, new hoses. 8,000 hours rebuilt @ 5,300 hrs engine and transmission, Power Shift transmission, pilot controls, tight center section, solid Sure Grip grapple tight boom, engine heater and quick couples, adjustable bunks, strait blade. Heat. 23.1x26 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Franklin 132 1996
$46,500
Hydro Ax 511EX Feller Buncher

Hydro Ax 511EX Feller Buncher

1996 Hydro Ax 511EX Feller Buncher. This machine has a Cummins 6BT engine, runs and starts good, 7,500 hours, strong hydraulics and cylinders, hydrostats are in good order, tight center section and lift arms, 20" head, straight blade, good teeth, could use turning, heat, A/C, lights. 28L x26 tires - 3 are @ 75%, 1 is @ 30%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 511EX 1996
$33,500
CAT 525 Grapple Skidder with Winch ***SOLD***

CAT 525 Grapple Skidder with Winch ***SOLD***

1996 CAT 525 Grapple Skidder with Winch. This skidder runs and starts good, strong hydraulics and transmission, steer blade and steer cylinders are in good order, has a few seeps, winch and grapple are in good condition, second owner, 30.5x32 tires @ 70% with a set of new chains, 3/4" swedge cable 3 chokers, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

CAT 525 1996
$28,500
Hydro-ax 411E Feller Bunchers

Hydro-ax 411E Feller Bunchers

1996 Hydro-ax 411E, Timbco bar-saw head, 6BT Cummins engine, 23.1x26 rubber, 9749 hours

Hydro-Ax 411E 1996
$34,999