Sort By:   GridGallery
Photo Title
Make Model Year Price
Link Belt 3400Q Stroke Delimber

Link Belt 3400Q Stroke Delimber

1997 Link Belt 3400Q Stroke with Denis Boom Delimber. Owner stated that this unit has a re-built Isuzu motor (800 to 1,000 hours ago) runs and starts great, this machine also has new knives, new bushings and pins, and a new turn table. Owner said that the undercarriage is about 75%, strong hydro, joystick controls, will need a few small fixes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA.

Link Belt 3400Q 1997
$38,500
Hyundai 290 Delimber

Hyundai 290 Delimber

1995 Hyundai 290 Delimber with Pierce Delimbinater. Owner stated that this unit has a mono boom, photo cell with butt plate, does not have diameter measuring. Owner said that this machine has one saw, U/C @ 50% or better. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northwest USA.

Hyundai 290 1995
$59,500
Trelan 23L Chipper

Trelan 23L Chipper

1994 Trelan 23L Chipper with Loader. Owner stated that this machine has a 3412 CAT motor with 487 hours on rebuild. Owner said that this unit has tight pins and bushings, strong hydraulics, joystick controls. Call for more Info. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Trelan 23L 1994
$109,900
John Deere 648GIII D/A Grapple Skidder

John Deere 648GIII D/A Grapple Skidder

2003 John Deere 648GIII Dual Arch Grapple Skidder. Owner stated that this machine has 10,000 hours, but was rebuilt at 6,000 hours, runs and starts good. Owner said that this machine has strong hydraulics, tight pins, good bushing, heat A/C, tires 25% with ring chains in the front and ice chains in the back. This machine was well maintained. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

John Deere 648GIII D/A 2003
$64,999
Hydro-Ax 670 Feller Buncher

Hydro-Ax 670 Feller Buncher

2005 Hydro-Ax 670 Feller Buncher. Owner stated that this unit has a new engine, less than thirty hours on it, new pins and bushings, hydrostatic drives and saw drives, pressure checked and adjusted like new. Owner said that this machine has one new tire (30.5 Firestone) others are about 50-55%, and new windshield. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Hydro-Ax 670 2005
$72,500
Enviromax Forwarder

Enviromax Forwarder

The new EnviroMax forwarder is THE all-weather machine for getting that hard to reach timber.The EnviroMax forwarder operates at very low ground pressure, providing the most environmentally friendly footprint in the industry. An extremely durable 33" wide rubber and steel track, with heavy duty cross bars is the key to the very low ground pressure. Deep rutting from conventional forwarders is a thing of the past with the EnviroMax forwarder.The EnviroMax forwarder is built on a time tested, proven platform to guarantee the lowest possible operating costs. Powered by a 177 horsepower Deutz turbo diesel, and equipped with a 8,000 lb. Serco loader, the EnviroMax forwarder is an unbeatable,all-terrain, all-season, all-weather machine.In addition to it's exceptionally soft footprint, the Enviromax forwarder has the unique capability to work 360 degrees around the machine, including directly offthe front of the forwarder, making it a great machine for pipeline mats or right-of-way clearing jobs. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Enviromax - Unknown
$224,900
CTR 314-TSC Slasher

CTR 314-TSC Slasher

1998 CTR 314-TSC Slasher. Owner stated this is a self-contained delimber with topping saw and 42" side saw with a John Deere power unit, in good condition, needs paint. Owner states that this equipment is in good condition and works well. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

CTR 314-TSC 1998
$18,000
Timberjack 840 Feller Buncher

Timberjack 840 Feller Buncher

2000 Timberjack 840 Feller Buncher. Owner stated this is a strong running machine, center is tight, shifts smoothly, good saw head with good saw disc, and almost new teeth, and lever steering. Tractor does need tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Timberjack 840 2000
$70,000
Tigercat 724D Feller Buncher

Tigercat 724D Feller Buncher

2005 Tigercat 724D Feller Buncher with a 5600 bunching head. Owner stated that machine is in good condition. Owner states that the motor runs good and was rebuilt 4000hrs ago, pumps are strong, pins and bushings are tight. 2 newer 3400 flotation tires, cold A/C. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA. ***REDUCED FROM $72,500.00***

Tigercat 724D 2005
$62,900
Prentice 384 Delimber/Loader

Prentice 384 Delimber/Loader

2002 Prentice 384 Delimber/Loader. Owner stated that this unit has a Cummins 6BT, Prentice 5055TWR50 grapple, CTR 450 delimber, 7843 hours. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Southeast USA.

Prentice 384 2002
$56,900
Prentice 384 Loader w/ Buck Saw

Prentice 384 Loader w/ Buck Saw

2004 Prentice 384 Loader with Buck Saw. Owner stated that this is a nice machine with 10,000hrs, JD motor runs good, no major leaks, strong hydro, tight pins and bushings, good boom, joystick controls. Owner said that this loader is ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located Southeast USA.

Prentice 384 2004
$61,500

Hydro-Ax 511E Feller Buncher

1995 Hydro-Ax 511E Feller Buncher. Owner stated that this machine has a 20" Koehring saw head, recon motor 2 years ago, low hrs. Owner said it has a new hydraulic pump, tires o.k. No major leaks, ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located Southcentral USA.

Hydro-Ax 511E 1995
$32,500