Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 240A Cable Skidder

Timberjack 240A Cable Skidder

1991 Timberjack 240A Cable Skidder. Owner stated that this unit has a Newer Cummins 4BTA, 2,000 hours on engine, manual transmission, new clutch, pressure plate and throwout bearing less than 1,000 hours ago. Owner said that this skidder has fair pins and bushings, winch bands replaced, tires 23.1x26 @ 25% with chains. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Timberjack 240A 1991
$34,900
Prentice 410C Knuckle Boom Log Loader

Prentice 410C Knuckle Boom Log Loader

1994 Prentice 410C Knuckle Boom Log Loader with CTR Delimber. Owner stated that this Loader has a 6BT Cummins engine, runs good, strong hydro, few minor leaks, AC, very strong loader, Prentice grapple continuously rotates. Owner stated this machine is in good condition and used daily. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.***REDUCED FROM $25,500.00***

Prentice 410C 1994
$24,900
Chambers Delimbinator Debarker

Chambers Delimbinator Debarker

2004 Chambers Delimbinator Debarker. Owner stated this is a good solid machine, new shaft bearings. Ready for the woods. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Chambers Delimbinator 2004
$55,000
Bandit Beast 3680 Horizontal Grinder

Bandit Beast 3680 Horizontal Grinder

2000 Bandit Beast 3680 Horizontal Grinder. Owner stated this is a solid used horizontal grinder/chipper, well maintained, comes with screens for grinding and chipping, runs strong, no major repairs. Owner stated this machine has a 600 HP Deere engine that does not smoke or use a lot of oil, good feed deck and discharge belt, this is a terrific buy for a clearing contractor or for storm cleanup. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Bandit Beast 3680 2000
$109,850
CAT 525 S/A Grapple Skidder

CAT 525 S/A Grapple Skidder

1997 CAT 525 Single Arch Grapple Skidder. Owner stated this machine has been rebuilt and is working everyday, machine has 14,000 frame hours, the transmission and engine were rebuilt at 12,000 hours. Owner stated the center section and the front cradles were done at 10,000 hours, hydraulics are strong and the hydraulic pump was replaced at 8,500 hours, closed cab, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

CAT 525 S/A 1997
$37,500
John Deere 648GIII D/A Grapple Skidder

John Deere 648GIII D/A Grapple Skidder

2005 John Deere 648GIII D/A Grapple Skidder. Owner stated that this unit has 14,800 frame hours, new engine recently, strong hydraulics, tight pins and bushings. Owner said that this machine has had many updates, transmission is in good working order, heat, A/C, tires are @ 60% with 2 sets of chains in good condition. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

John Deere 648GIII D/A 2005
$68,500
Hood 20000 Loader with 60" Hood Slasher

Hood 20000 Loader with 60" Hood Slasher

1998 Hood 20000 Loader with a 60" Hood Slasher. This loader has a John Deere 6 cyl. motor, runs and starts good, strong hydraulics, tight pins and bushings, 30' boom, new Vickers pump, 1/3 cord Hood bypass bucket with continuous rotation, 12,000 hours, joystick controls, Hood 6x6 carrier, heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Hood 20000 1998
$55,500
Madill 1250 Feller Buncher

Madill 1250 Feller Buncher

2007 Madill 1250 Feller Buncher. Owner stated that this unit has 6,800 hours, Isuzu 6cly engine, runs and starts good, strong hydraulics, GN 22" head, tight pins and bushings. Owner said that they just redid the bottom rollers, rest of U/C 50%, new cylinders in boom, grab arm cylinder was rebuilt, heat, A/C and lights. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Canada. ***ON HOLD***

Madill 1250 2007
$112,500
Morbark 6036 Whole Tree Chipper

Morbark 6036 Whole Tree Chipper

1999 Morbark 6036 Whole Tree Chipper. Owner stated that this unit has a CAT 3408 600 HP engine with 4,000 hours, runs and starts good, strong hydraulics, new in-feed chain, rollers have been rebuilt, 60" drum in good working condition, braided Boston belts. Owner said that this machine has Morlift 250 extended boom loader, no welds, tight pins and bushings, 25' reach, new 3 disk clutch. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Morbark 6036 1999
$105,500
Timberjack 230 Cable Skidder

Timberjack 230 Cable Skidder

1978 Timberjack 230 Cable Skidder with Winch. Owner stated that this unit has a 353 Detroit engine, runs and starts good, has been rebuilt, pretty tight pins and bushings, good hydraulics a few leaks, no major. Owner said that this skidder has a new but plate and good winch, tires are 23.1 x 26 @ 40%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Timberjack 230 1978
$18,500
Hood 24000 Loader

Hood 24000 Loader

1989 Hood 24000 Truck Mounted Loader with a Hagen Slasher. This machine has a John Deere engine with 2,000 hours, pump was updated at the same time, Rotobec grapple, loader has tight pins and bushings in boom, cylinders are in good condition, 1994 Hagen Slasher has a 60" blade, 16' bed pump has been gone through, mounted on a Cane truck with a 290 Cummins and a 10 speed, good tires and brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Hood 24000 1989
$27,500
Link Belt 3400Q Stroke Delimber

Link Belt 3400Q Stroke Delimber

1997 Link Belt 3400Q Stroke with Denis Boom Delimber. Owner stated that this unit has a re-built Isuzu motor (800 to 1,000 hours ago) runs and starts great, this machine also has new knives, new bushings and pins, and a new turn table. Owner said that the undercarriage is about 75%, strong hydro, joystick controls, will need a few small fixes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA.

Link Belt 3400Q 1997
$38,500