Sort By:   GridGallery
Photo Title
Make Model Year Price
Bandit Beast 3680 Horizontal Grinder

Bandit Beast 3680 Horizontal Grinder

2000 Bandit Beast 3680 Horizontal Grinder. Owner stated this is a solid used horizontal grinder/chipper, well maintained, comes with screens for grinding and chipping, runs strong, no major repairs. Owner stated this machine has a 600 HP Deere engine that does not smoke or use a lot of oil, good feed deck and discharge belt, this is a terrific buy for a clearing contractor or for storm cleanup. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Bandit Beast 3680 2000
$109,850
CAT 525 S/A Grapple Skidder

CAT 525 S/A Grapple Skidder

1997 CAT 525 Single Arch Grapple Skidder. Owner stated this machine has been rebuilt and is working everyday, machine has 14,000 frame hours, the transmission and engine were rebuilt at 12,000 hours. Owner stated the center section and the front cradles were done at 10,000 hours, hydraulics are strong and the hydraulic pump was replaced at 8,500 hours, closed cab, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

CAT 525 S/A 1997
$37,500
John Deere 648GIII D/A Grapple Skidder

John Deere 648GIII D/A Grapple Skidder

2005 John Deere 648GIII D/A Grapple Skidder. Owner stated that this unit has 14,800 frame hours, new engine recently, strong hydraulics, tight pins and bushings. Owner said that this machine has had many updates, transmission is in good working order, heat, A/C, tires are @ 60% with 2 sets of chains in good condition. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

John Deere 648GIII D/A 2005
$68,500
Go-Tract Skidder

Go-Tract Skidder

70's Go-Tract Skidder with a 453 Detroit. Owner stated that this machine has a cracked head, 40" tracks, needs rubber belting and bogie tires, extra parts, Funk transmission, gearmatic winch. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Go-Tract - -
$Call for Price
Franklin 170 Cable Skidder

Franklin 170 Cable Skidder

1985 Franklin 170 Cable Skidder. Owner stated that this unit has a 453 Detroit with new head, pins will need some attention soon, 34" flotation tires, newly rebuilt T88 transfer case, four speed manual transmission, Franklin winch, overall fair condition. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Franklin 170 1985
$14,990
Hood 20000 Loader with 60" Hood Slasher

Hood 20000 Loader with 60" Hood Slasher

1998 Hood 20000 Loader with a 60" Hood Slasher. This loader has a John Deere 6 cyl. motor, runs and starts good, strong hydraulics, tight pins and bushings, 30' boom, new Vickers pump, 1/3 cord Hood bypass bucket with continuous rotation, 12,000 hours, joystick controls, Hood 6x6 carrier, heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA.

Hood 20000 1998
$55,500
Precision 2366/X1175-23 Grinder

Precision 2366/X1175-23 Grinder

1997 Precision 2366/X1175–23 Grinder. Owner stated that this unit has a Cummins main engine 700 HP, runs and starts good, 365 HP loader and debarker engine. Owner said that this grinder has 3,800 hours and is in good operating condition. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Precision 2366/X1175-23 1997
$115,900
Madill 1250 Feller Buncher

Madill 1250 Feller Buncher

2007 Madill 1250 Feller Buncher. Owner stated that this unit has 6,800 hours, Isuzu 6cly engine, runs and starts good, strong hydraulics, GN 22" head, tight pins and bushings. Owner said that they just redid the bottom rollers, rest of U/C 50%, new cylinders in boom, grab arm cylinder was rebuilt, heat, A/C and lights. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Canada. ***ON HOLD***

Madill 1250 2007
$112,500
Morbark 6036 Whole Tree Chipper

Morbark 6036 Whole Tree Chipper

1999 Morbark 6036 Whole Tree Chipper. Owner stated that this unit has a CAT 3408 600 HP engine with 4,000 hours, runs and starts good, strong hydraulics, new in-feed chain, rollers have been rebuilt, 60" drum in good working condition, braided Boston belts. Owner said that this machine has Morlift 250 extended boom loader, no welds, tight pins and bushings, 25' reach, new 3 disk clutch. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Morbark 6036 1999
$105,500
Timberjack 230 Cable Skidder

Timberjack 230 Cable Skidder

1978 Timberjack 230 Cable Skidder with Winch. Owner stated that this unit has a 353 Detroit engine, runs and starts good, has been rebuilt, pretty tight pins and bushings, good hydraulics a few leaks, no major. Owner said that this skidder has a new but plate and good winch, tires are 23.1 x 26 @ 40%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Timberjack 230 1978
$18,500
Tigercat 620C D/A Grapple Skidder

Tigercat 620C D/A Grapple Skidder

2009 Tigercat 620C D/A Grapple Skidder with Winch. Owner stated that this unit has 7,800 hours, Cummins engine, runs and starts good, tight pins and bushings, strong hydraulics. Owner said that this machine has good drive motor and pump, tires 30.5x32 2 @ 90%, 1 @ 70%, heat, A/C, differentials in good working order. Ready to work.. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Tigercat 620C D/A 2009
$132,000
Hood 24000 Loader

Hood 24000 Loader

1989 Hood 24000 Truck Mounted Loader with a Hagen Slasher. This machine has a John Deere engine with 2,000 hours, pump was updated at the same time, Rotobec grapple, loader has tight pins and bushings in boom, cylinders are in good condition, 1994 Hagen Slasher has a 60" blade, 16' bed pump has been gone through, mounted on a Cane truck with a 290 Cummins and a 10 speed, good tires and brakes. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

Hood 24000 1989
$27,500