All listings for: RedPineEquipment

Photo	Title	Make	Model	Year	Price
	Bell's 8000 Firewood Processor w/ Conveyor *SOLD* 2015 Bell's 8000 Firewood Processor with Conveyor and Tumbler. Hour meter reads 2,595 hours. 127hp CAT diesel engine starts and runs good. 60″ Simonds Circular Saw and a 7″ 56 ton splitter cylinder. 6 & 8 way wedges. Tumbler has not been used much, like new condition. 32' conveyor is in good condition. Cab with heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. *SOLD*	Bell's	8000	2015	$110,000
	Delta TTS Hydraulic Power Disc Trencher 1997 Delta TTS Hydraulic Power Disc Trencher. This equipment is in good working order, all discs have been hard faced reinforced, has all the electric control valves, strong cylinders. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Delta	TTS	1997	$55,900
	John Deere 648D Grapple Skidder 1989 John Deere 648D Grapple Skidder. This equipment has a newer engine and the hydraulic pump was rebuilt in 2005. Cylinders in good shape. Tight center section. Has arch and grapple set up for it but is currently set up with a 1997 Delta TTS Power Disc Trencher. Trencher is not included in the quoted sale price but can be sold with the machine, arch and grapple for $79,900. 30.5 x 32 tires @ 75% with a set of chains. Cab has heat, A/C, and lights. Stacking blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	648D	1989	$27,500
	AM Machinery Dump Trailer with AM 23' *SOLD* 2020 AM Machinery Trailer with 20' Dump Box & AM 230 23' Loader. Fully galvanized. 13 HP Honda engine, AM 230 23' loader, 48" bypass grapple with continuous rotation. 20,000 GVW. 4' sides all around with 2' side and gate extensions. Holds 32 Yards of material with the included side extensions. Tires are in good condition, estimated at 80%. 20,000 GVW. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	AM Machinery	20' Dump	2020	Call for Price
	Ponsse Scorpion with Ponsse H7 Harvesting Head *SOLD* 2016 Ponsse Scorpion with 2020 Ponsse H7 Harvesting Head. Hour meter reads 13,000 hours. 710/45-26.5 tires are estimated at 80%. One set of flotation @ 60%, one set of traction tracks @ 40%. 2020 Ponsse H7 harvesting head is in good condition. Webasto preheater. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. *SOLD*	Ponsse	Scorpion	2016	Call for Price
	John Deere 437C Log Loader w/ CSI Bucksaw & Delimber 2006 John Deere 437C Log Loader with CSI Bucksaw and Delimber. John Deere 6068T engine. Pins and bushings are tight, turn table is estimated at 50%. Uses 2 quarts of oil ever 250 hours. Hydraulics and swing are strong. New packing in grapple cylinders. CSI 18' bucksaw with delimber and topping saw are in good condition. New bar and chain setup for all lengths 8'-18'. Heat and A/C are in working order. Owner operator machine. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	437C	2006	$47,500
	White Day Cab Semi 1987 White / Volvo Day Cab Semi. 350 big cam Cummins. 13 speed Road Ranger transmission. All new 16 ply tires (no recaps). Includes 3 spare tires and lots of extra wheels. Newer rear end, bell housing, clutch plate, and throwout bearing. Heat is in good working order. Owner operator. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	White	-	1987	$19,500
	Tigercat 720D Feller Buncher 2006 Tigercat 720D Feller Buncher. Hour meter reads 10,000 frame hours, 3,000 hours on newer 5.9L Cummins. 28Lx26 tires are estimated at 80%. Pins, bushings, and center is tight. Strong hydraulics. 20" felling head, disc is good and bearings are solid. Newer tilt cylinder and pin. Heat & A/C were gone through recently. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Tigercat	720D	2006	$47,500
	John Deere 648E Swing Grapple Skidder 1995 John Deere 648E Swing Grapple with Winch. Reman 6068 engine. Two new 20 ply 28Lx26 tires on the rear estimated at 90%, the front two are estimated at 50%. One set of chains included estimated at 80%. Winch, transmission, engine, and hydraulics are strong. Pins and bushings are tight. Heat & A/C, A/C is not working and needs a hose. Spare water pump and alternator included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	648E	1995	$35,900
	Ponsse Scorpion King with H7 Processing Head 2015 Ponsse Scorpion King with Ponsse H7 Processing Head. Hour meter reads 14,912 hours. Mercedes engine. 710/45-26.5 tires are estimated at 75%. Two sets of tracks included are estimated at 65%. C50 crane. Center section was redone in late 2023. Pins and bushings have been done every year in the head. New expansion pins in the center. Leveling cab sensors were done in 2023. Webasto preheater. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Scorpion	2015	$215,000
	Tigercat 724G Feller Buncher 2015 Tigercat 724G Feller Buncher. Hour meter reads 7,347 hours. 28Lx26 tires are estimated at 90%. 5600 Bunching Saw is in good condition. Webasto preheat system. Center is tight. Heat.A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Tigercat	724G	2015	$99,900
	CAT 501HD with Fabtek 4 Roller Processing Head *SOLD* 2015 CAT 501HD with Fabtek 4 Roller Processing Head. Hour meter reads 6,029 hours. 24" double grouser pads, undercarriage is estimated at 50%. Fabtek 4 Roller Processing head is in good condition, measuring system in working order. Proheat preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	CAT	501 HD	2015	Call for Price